我的显示器怎么刷新率提不上去

声卡/显卡/打印机/USB设备等硬件问题(网卡问题请发上面的网卡板块)
回复
pty_cobra
帖子: 21
注册时间: 2007-12-11 0:30
送出感谢: 0
接收感谢: 0

我的显示器怎么刷新率提不上去

#1

帖子 pty_cobra » 2008-05-26 18:52

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by failsafeDexconf, using
# values from the debconf database and some overrides to use vesa mode.
#
# You should use dexconf or another such tool for creating a "real" xorg.conf
# For example:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "cn"
Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection

Section "Device"
Identifier "Configured Video Device"
Boardname "vesa"
Busid "PCI:2:0:0"
Driver "nvidia"
Screen 0
Option "NoLogo" "True"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
Vendorname "Generic CRT Display"
Modelname "Monitor 1280x1024"
Horizsync 30-92
Vertrefresh 50-160
modeline "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
modeline "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
modeline "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
modeline "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
modeline "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
modeline "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
Gamma 1.0
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1280 1024
Modes "1024x768@75" "1024x768@70" "1024x768@60" "1152x864@75" "1280x1024@75" "1280x960@60" "1280x960@75" "1400x1050@60" "640x480@60" "1600x1200@65" "1600x1200@60"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
EndSection
Section "Module"
Load "glx"
Load "v4l"
EndSection
Section "ServerFlags"
EndSection


以上是/etc/X11/xorg.conf
我的显示器是philips 107p4
飞利浦 107P4 的详细参数
飞利浦 107P4 基本参数
产品名称 飞利浦 107P4
显像管类型 纯平
显像管品牌 三菱
接口类型 15针 D-sub
尺寸(英寸) 17英寸
栅距/水平点距(mm) 0.25
飞利浦 107P4 技术参数
扫描频率 水平扫描频率30-92kHz/垂直扫描频率50-160Hz
分辨率 最大分辨率为1920x1440/最佳分辨率为1024x768
带宽(MHz) 203MHz
飞利浦 107P4 功能参数
认证标准 TCO99/E2000/NUTEK/EPA/FCC/CE/IS09241/IS01400l
OSD菜单内容 有
高亮显示 支持
飞利浦 107P4 外观参数
宽度(mm) 399mm
高度(mm) 410mm
厚度(mm) 419mm
重量(Kg) 17.5kg

调了好久都调不好
屏很闪
附件
Screenshot-监视器分辨率设置.png
Screenshot-监视器分辨率设置1.png
pty_cobra
帖子: 21
注册时间: 2007-12-11 0:30
送出感谢: 0
接收感谢: 0

#2

帖子 pty_cobra » 2008-05-27 6:16

8600GT的显卡,各位大哥帮忙
回复

回到 “常用硬件支持”