ubuntu8.04重大问题(问题解决)

声卡/显卡/打印机/USB设备等硬件问题(网卡问题请发上面的网卡板块)
回复
头像
0cean
帖子: 87
注册时间: 2007-12-07 15:53
送出感谢: 2 次
接收感谢: 0

ubuntu8.04重大问题(问题解决)

#1

帖子 0cean » 2008-06-20 12:13

以前一直用7.10(前一段时间删了),最近打算装8.04,开始用硬盘安装,安装完成重启后在登陆界面不断的登录,以为安装方法有问题,就刻盘了,没想到任然是这个问题,最后在安全模式登陆,更新并装ATI官方驱动驱动后正常,前天把默认的刷新率从设置75改为60后(推测是这个原因)就出现在登录过程中出现黑屏(推测是这个原因),显示器提示超出范围(,安全模式下修改了几次/etc/X11/xorg.conf 后登陆界面地方就无响应了。于是想到用8.04的livecd进使用模式修改,结果也遇到了在登陆界面不断的登录的问题,这应该是比个比较大的Bug吧。无奈下只好求助大家帮我写
个/etc/X11/xorg.conf

把一些需要的数据贴出来


惠普g1030cn台式 ATIxpress200集显

显示器为HP vs17e

以下是从xp的恢复光盘驱动目录里找到的数值



[Manufacturer]
%HP%=HP

[HP]
%vs17%=vs17.Install, Monitor\HWP2647

[vs17.Install]
DelReg=DEL_CURRENT_REG
AddReg=vs17.AddReg, 1280, DPMS
CopyFiles=vs17.CopyFiles

[DEL_CURRENT_REG]
HKR,MODES
HKR,,MaxResolution
HKR,,DPMS
HKR,,ICMProfile

[1280]
HKR,,MaxResolution,,"1280,1024"

[DPMS]
HKR,,DPMS,,1

[vs17.AddReg]
HKR,"MODES\640,480",Mode1,,"30.0-83.0,50.0-76.0,-,-"
HKR,"MODES\800,600",Mode1,,"30.0-83.0,50.0-76.0,+,+"
HKR,"MODES\1024,768",Mode1,,"30.0-83.0,50.0-76.0,+,+"
HKR,"MODES\1280,1024",Mode1,,"30.0-83.0,50.0-76.0,+,+"
HKR,,ICMProfile,0x00010000,"sRGB Color Space Profile.icm"
HKR,,ICMProfile,0x00010008,"HP_vs17.icm"
HKR,,PreferredMode,,"1280,1024,60"

[vs17.CopyFiles]
HP_vs17.icm

[Strings]
MonitorClassName="Monitor"
HP="Hewlett-Packard"
vs17="HP vs17 flat panel monitor"
Disk1="HP vs17 INF software"
上次由 0cean 在 2008-06-21 1:38,总共编辑 2 次。
头像
0cean
帖子: 87
注册时间: 2007-12-07 15:53
送出感谢: 2 次
接收感谢: 0

#2

帖子 0cean » 2008-06-20 12:18

有标题党嫌疑,呵呵,心急,不得已而为之,见谅...还有一个问题,自定义的桌面壁纸存放在那个目录下,usr下目录只有自带的桌面,我是在看图程序里设置的桌面,很喜欢那张桌面,实在不行要重装也要把那张壁纸找出来..... :D :D



下面是我目前的配置(用软件从xp打开复制到的)

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "cn"
Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection

Section "Device"
Identifier "Configured Video Device"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
EndSection
上次由 0cean 在 2008-06-20 12:36,总共编辑 1 次。
头像
haolll230
帖子: 77
注册时间: 2007-11-02 18:17
来自: 广东潮州
送出感谢: 0
接收感谢: 0
联系:

#3

帖子 haolll230 » 2008-06-20 12:22

没碰到过 :?:
我爱女朋友,也爱linux(^_^)
头像
muzuiget
帖子: 1097
注册时间: 2007-12-31 14:57
送出感谢: 0
接收感谢: 1 次

#4

帖子 muzuiget » 2008-06-20 14:21

运行

代码: 全选

sudo dpkg-reconfigure -phigh xserver-xorg

试试,我之前搞分辨率出事就这样弄回来的。
头像
0cean
帖子: 87
注册时间: 2007-12-07 15:53
送出感谢: 2 次
接收感谢: 0

#5

帖子 0cean » 2008-06-21 1:01

muzuiget 写了:运行

代码: 全选

sudo dpkg-reconfigure -phigh xserver-xorg

试试,我之前搞分辨率出事就这样弄回来的。


还是没能解决...
janker2lonely
帖子: 557
注册时间: 2007-01-09 11:09
来自: 廣州
送出感谢: 0
接收感谢: 2 次

#6

帖子 janker2lonely » 2008-06-21 1:05

卸载“受限驱动“。
头像
0cean
帖子: 87
注册时间: 2007-12-07 15:53
送出感谢: 2 次
接收感谢: 0

#7

帖子 0cean » 2008-06-21 1:37

janker2lonely 写了:卸载“受限驱动“。


黑屏状态.....我用的是官方驱动
终于搞定了.....
在root下修改xorg.conf.......女人靠山山倒,靠人人跑....只能靠自己...
贴一份自己的conf,以供遇到此内问题的人所需

代码: 全选

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
   Identifier     "Default Layout"
   Screen      0  "aticonfig-Screen[0]" 0 0
EndSection

Section "Files"
EndSection

Section "Module"
EndSection

Section "InputDevice"
   Identifier  "Generic Keyboard"
   Driver      "kbd"
   Option       "XkbRules" "xorg"
   Option       "XkbModel" "pc105"
   Option       "XkbLayout" "cn"
   Option       "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
   Identifier  "Configured Mouse"
   Driver      "mouse"
   Option       "CorePointer"
EndSection

Section "Monitor"
   Identifier   "Configured Monitor"
EndSection

Section "Monitor"
   Identifier   "aticonfig-Monitor[0]"
   Option       "VendorName" "ATI Proprietary Driver"
   Option       "ModelName" "Generic Autodetecting Monitor"
   Option       "DPMS" "true"
EndSection

Section "Device"
   Identifier  "Configured Video Device"
EndSection

Section "Device"
   Identifier  "aticonfig-Device[0]"
   Driver      "fglrx"
   Option       "VideoOverlay" "on"
   Option       "OpenGLOverlay" "off"
EndSection

Section "Screen"
   Identifier "Default Screen"
   Device     "Configured Video Device"
   Monitor    "Configured Monitor"
EndSection

Section "Screen"
   Identifier "aticonfig-Screen[0]"
   Device     "aticonfig-Device[0]"
   Monitor    "aticonfig-Monitor[0]"
   DefaultDepth     24
   SubSection "Display"
      Viewport   0 0
      Depth     24
   EndSubSection
EndSection
回复

回到 “常用硬件支持”