[问题]关于Ubuntu分辨率的问题。。。。

CPU/显卡/打印机/USB设备等硬件问题
回复
步枪一号
帖子: 42
注册时间: 2007-09-13 23:16

[问题]关于Ubuntu分辨率的问题。。。。

#1

帖子 步枪一号 » 2008-06-26 21:11

刚装好Ubuntu8.04,通过硬件驱动里受限驱动打勾,更新了显卡(NVIDIA 7300GT)的驱动,在刚装好没装显卡驱动的时候分辨率可达到1280*1024,但不知怎么的,打了显卡驱动反而只能设成1024*768了,我的显示器是三星 SyncMasaer 788DF,哪位有帮帮我啊?。。。。
还有以下两个问题:
1.系统->首选项->Advanced Desktop Effects Settings->General Compiz options->Desktop Size->Number of Desktops这个选项我只能设置为1,设置不了4个或是别的个数。
2.系统->首选项->Emerald Themer 0.7.2下,我已经安装了Mac主题,在>Emerald Themer 0.7.2下也已经有显示Mac主题,但为什么不能设成系统主题呢?
谢谢。。。。
步枪一号
帖子: 42
注册时间: 2007-09-13 23:16

#2

帖子 步枪一号 » 2008-06-27 7:24

请大家帮帮我啊。。。。。。谢谢各位了。。。。。
步枪一号
帖子: 42
注册时间: 2007-09-13 23:16

#3

帖子 步枪一号 » 2008-06-27 19:16

怎么没人帮我啊。。。。。。
步枪一号
帖子: 42
注册时间: 2007-09-13 23:16

#4

帖子 步枪一号 » 2008-06-27 20:01

呵呵。。。。。分辨率问题已经搞定了,其余两个问题还没有搞定。。。。
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "cn"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection

Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
Option "NoLogo" "True"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
Defaultdepth 24
EndSection

Section "ServerLayout"
Identifier "Default Layout"
screen "Default Screen"
EndSection
Section "Module"
Load "glx"
EndSection
这是我那个里面的所有东西,然后我就加了一条,变成:
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
Defaultdepth 24
SubSection "Display" Modes "1280x1024@75"
回复