谁给我发一个ATI的配置好的 xorg.conf 文件

声卡/显卡/打印机/USB设备等硬件问题(网卡问题请发上面的网卡板块)
回复
tanes
帖子: 30
注册时间: 2007-11-04 0:37
送出感谢: 0
接收感谢: 0

谁给我发一个ATI的配置好的 xorg.conf 文件

#1

帖子 tanes » 2008-08-01 13:08

我的xorg.conf文件打开是空的。我也不太会用,我的显卡 ATI 9550 显示器17寸的CRT,求一个配置好的 xorg.conf 文件, 先谢谢了。 不胜感激, 我都装了一个多月了,没装上,今天刚搞清楚,就是这个文件的事情
头像
jarodlau
帖子: 501
注册时间: 2005-09-06 20:34
送出感谢: 3 次
接收感谢: 1 次
联系:

#2

帖子 jarodlau » 2008-08-01 19:58

这是我的,看能不能帮到你

代码: 全选

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg
#Section "Device"
#       Identifier      "ATI"
#       Driver          "ati"
#	BusID           "PCI:1:05:0"
#Option          "AGPMode" "4"
#	Option	"AccelMethod"	"EXA"
#	Option	"PanelSize"	"1024*768"
#	Option	"ColorTiling"	"on"
#Option          "EnablePageFlip" "True"
  	#Option          "XAANoOffscreenPixmaps" "true"
        # This two lines are needed to prevent fonts from being scrambled
        #Option          "XaaNoScanlineImageWriteRect"
        #Option          "XaaNoScanlineCPUToScreenColorExpandFill"
	#Option          "EnablePageFlip" "True"
#Option          "EnableDepthMoves" "True"
#Option          "RenderAccel" "true" # Enables hardware acceleration
#Option          "DynamicClocks" "on" # Adds clock scalability / power management
#Screen 0
#EndSection
#Section "DRI"
#       Mode         0666
#EndSection

Section "ServerLayout"

#	Option "AIGLX" "True"
	Identifier     "Default Layout"
	Screen      0  "aticonfig-Screen[0]-0" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse" "CorePointer"
	InputDevice    "Touchpad"
EndSection

Section "Files"
EndSection

Section "Module"
	Load  "fglrx"
	Load  "glx"   # libglx.a
	Load  "dri"   # libdri.a
	Load  "drm"   # libdrm.a
EndSection

Section "InputDevice"
	Identifier  "Touchpad"
	Driver      "synaptics"
	Option	    "SendCoreEvents" "true"
	Option	    "Device" "/dev/input/mouse0"
	Option	    "Protocol" "auto-dev"
	Option	    "SHMConfig" "on"
    #默认关闭Touchpad
	Option	    "TouchpadOff" "1"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc104"
	Option	    "XkbLayout" "us"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "AlwaysCore"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]-0"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]-0"
	Driver      "fglrx"
	BusID       "PCI:1:5:0"
	Option      "VideoOverlay"      "on" 
	Option      "OpenGLOverlay"     "off"
	Option	    "XAANoOffscreenPixmaps" "on"
        # 显卡动态调整频率
	Option	    "DynamicClocks" "on"
	# 2D 加速
       #Option 	    "Textured2D"	"on"
       #Option	    "TexturedXrender"	"on"
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]-0"
	Device     "aticonfig-Device[0]-0"
	Monitor    "aticonfig-Monitor[0]-0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "Extensions" 
        Option  "Composite" "1" 
EndSection 

Section "ServerFlags" 
	Option  "AIGLX" "on" 
EndSection
回复

回到 “常用硬件支持”