[已解决][问题]nvidia GF5200 128显卡,十装十死?(完全复活,感谢cnkilior)

声卡/显卡/打印机/USB设备等硬件问题(网卡问题请发上面的网卡板块)
回复
lwjcxy
帖子: 408
注册时间: 2008-08-26 2:08
送出感谢: 0
接收感谢: 0

[已解决][问题]nvidia GF5200 128显卡,十装十死?(完全复活,感谢cnkilior)

#1

帖子 lwjcxy » 2008-09-09 11:22

真是折腾坏了--把我!!!
为了分辨率达到1024*768.我试了无数方法。看清认熟了WIKI操作。

显卡是nvidia GF5200 128的,
只有装了nvidia-glx-legacy有过几次能显到1024*768.。可是重启就又回到默认的800*600.而且不管怎么弄。xorg-conf文件就是没有内容,空白的。。怎么设置真是没有法子。






我真是累坏,哪位援手我一下。。。
把具体操作告诉我。。。谢谢了。。
上次由 lwjcxy 在 2008-09-09 14:21,总共编辑 2 次。
头像
cnkilior
论坛版主
帖子: 4979
注册时间: 2007-08-05 17:40
送出感谢: 0
接收感谢: 5 次

#2

帖子 cnkilior » 2008-09-09 12:14

不应该是这个包nvidia-glx-legacy啊!这是给像tnt2这么老的只支持2d的显卡用的。应该是nvidia-glx。


---
你的linux发行版是什么?ubuntu8.04

如何安装的?安装的受限驱动,并直接提示nvidia-glx-legacy?

--
是这样的话,那么建议暂时不装驱动或手动强制为nvidia-glx。
对于配置文件空白的情况,只有重配了,命令:dpkg rexxxxx 包名(我不记得xorg的包名了)。具体请man dpkg。
lwjcxy
帖子: 408
注册时间: 2008-08-26 2:08
送出感谢: 0
接收感谢: 0

#3

帖子 lwjcxy » 2008-09-09 12:31

cnkilior 写了:不应该是这个包nvidia-glx-legacy啊!这是给像tnt2这么老的只支持2d的显卡用的。应该是nvidia-glx。


---
你的linux发行版是什么?ubuntu8.04

如何安装的?安装的受限驱动,并直接提示nvidia-glx-legacy?

--
是这样的话,那么建议暂时不装驱动或手动强制为nvidia-glx。
对于配置文件空白的情况,只有重配了,命令:dpkg rexxxxx 包名(我不记得xorg的包名了)。具体请man dpkg。
我装的是8.04(hardy)内核是2.6.24-19generic版本。gnome2.22.2
我按你的说man dpkg,贴上来是。

dpkg(1) dpkg suite dpkg(1)

NAME
dpkg - package manager for Debian

SYNOPSIS
dpkg [options] action

WARNING
This manual is intended for users wishing to understand dpkg's command
line options and package states in more detail than that provided by
dpkg --help.

It should not be used by package maintainers wishing to understand how
dpkg will install their packages. The descriptions of what dpkg does
when installing and removing packages are particularly inadequate.

DESCRIPTION
dpkg is a tool to install, build, remove and manage Debian packages.
The primary and more user-friendly front-end for dpkg is dselect(1).


dpkg itself is controlled entirely via command line parameters, which
consist of exactly one action and zero or more options. The action-
parameter tells dpkg what to do and options control the behavior of the
Manual page dpkg(1) line 1


怎么重配法。。。先谢谢哥们。
头像
jialeadmin
帖子: 724
注册时间: 2008-06-17 23:17
来自: 灾区
送出感谢: 0
接收感谢: 0
联系:

#4

帖子 jialeadmin » 2008-09-09 12:49

xorg-conf空白问题和字母大小写有关 iNUX对字母大小写比较敏感
◆WINDOWS系统已彻底删除
◆正在安装UBUNTU 9.04
◆系统正在复制文件,请稍等...
┌────────────┐
│ ■■■■■■■□□□ 70% │
└────────────┘
lwjcxy
帖子: 408
注册时间: 2008-08-26 2:08
送出感谢: 0
接收感谢: 0

#5

帖子 lwjcxy » 2008-09-09 13:14

我强行在root下把xorg.conf的空白页贴进如下内容:
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
Defaultdepth 24
SubSection "Display"
Depth 24
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection

虽然可以在屏幕分辨那里有了1024*768的选项,可是设置后,桌面还是没变过来。。仍是800*600的放大形(桌面变大了。不是一屏全显。移动鼠标向上和向下才能找到面板和任务栏。
lwjcxy
帖子: 408
注册时间: 2008-08-26 2:08
送出感谢: 0
接收感谢: 0

#6

帖子 lwjcxy » 2008-09-09 13:38

#xorg.conf starts here

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "NVIDIA Corporation NV18 [GeForce4 MX - nForce GPU]"
Driver "nv"
BusID "PCI:1:0:0"
EndSection

Section "Monitor"
Identifier "ULTRASCANP99"
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV18 [GeForce4 MX - nForce GPU]"
Monitor "ULTRASCANP99"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "720x400" "720x350" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "720x400" "720x350" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "720x400" "720x350" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "720x400" "720x350" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "720x400" "720x350" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "720x400" "720x350" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection

我网上找了一个,可是强行贴进去后,屏幕分辨居然是原来的三项,最高是800*600。。。
lwjcxy
帖子: 408
注册时间: 2008-08-26 2:08
送出感谢: 0
接收感谢: 0

#7

帖子 lwjcxy » 2008-09-09 13:52

按二楼的哥们我重新再装了...
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Tue Jan 22 19:53:46 PST 2008

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection

Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "keyboard"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
lwjcxy
帖子: 408
注册时间: 2008-08-26 2:08
送出感谢: 0
接收感谢: 0

#8

帖子 lwjcxy » 2008-09-09 14:01

彻底成功。。。。。。。。。。。。。。。感谢。。cnkilior
是俺没有找对nvidia-glx包。。。是nvidia-glx这个包。。
lwjcxy
帖子: 408
注册时间: 2008-08-26 2:08
送出感谢: 0
接收感谢: 0

#9

帖子 lwjcxy » 2008-09-09 14:39

nvidia GF5200 128显卡具体操作是:
1.系统-新立德-Restricted设备专用打勾,下面就是自动的点确定得了。
2.新立德-搜索-nvidia:找到nvidia-glx,右键标记,应用。又是自动的。。。确定得了。到这里已经是成功了。
3.打开终端-输入:sudo nvidia-xconfig,还是自动。
4.小修一下,俺04年的老显示器修过两回,就是耐折腾:打开系统盘目录,俺是E盘下找到/etc/X11/下的xorg.conf文件,右键管理员打开(这样才好编辑),实际内容是:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Tue Jan 22 19:53:46 PST 2008

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection

Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "keyboard"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

我就是把1600*1200和1280*1024不要了。保存。。。重启。就看到nvidia.的图标了。。。先不去掉。就为这个屏幕分辨我重装,到今天为止21次。。。。感谢感谢啊。。。世上还是好人多。。。现实网络。。。

终极感想:没有找对路子,活猫也难遇死耗子:有人指点一条明路,胜你千回百转。。。。
头像
ghostry
帖子: 1532
注册时间: 2008-07-23 20:08
来自: http://www.ghostry.cn
送出感谢: 0
接收感谢: 1 次
联系:

#10

帖子 ghostry » 2008-09-09 18:03

用那个envyng吧.自动装显卡驱动
http://www.ghostry.cn狂网技术工作室,组网建站,平面设计,java项目,空间域名.
好心人点这里进去注册并且用一次,给我增加点流量http://tinyurl.com/272ncjl
电脑配置:
公司:880G/II250/1TB/2G1333/
家:785G+/II245+/1TB/2G677/
头像
neolee
帖子: 60
注册时间: 2006-05-06 10:46
来自: 伟人故里
送出感谢: 0
接收感谢: 0

#11

帖子 neolee » 2008-09-09 21:39

我装过的一台FX5200,8.04一装好更新完就正常显示了,可以达到1024X768,87的刷新率,但就是死活打不开compiz
X2 5000+黑盒(挂了换了240)
KM DDR800 2G
780G+HD3450(后来才知道WIN7不能混交)
ST160G
XP+Ubuntu(不玩了改为WIN7了)

闪龙3000+ 754针脚(超到2G)
512M DDR400
ECS SIS761
7300GS 128M
80G
slitaz

备份机:
P3 933
128M
SIS630
1.5G 2.5寸
扩展卡+1T绿盘*2 软raid 1
FreeNAS

下载机:
MSS 1代改128M
80G
debian
回复

回到 “常用硬件支持”