[求助]显卡的问题,花屏死机,我快被折腾疯了!

声卡/显卡/打印机/USB设备等硬件问题(网卡问题请发上面的网卡板块)
回复
头像
嗜血的兔子
帖子: 208
注册时间: 2005-11-11 5:10
送出感谢: 0
接收感谢: 0
联系:

[求助]显卡的问题,花屏死机,我快被折腾疯了!

#1

帖子 嗜血的兔子 » 2006-05-20 3:28

我现在用的ubuntu是5.10 ,内核是2.6.12-10-386
显卡是丽台Nvidia FX5700U
显示器是三星959NF 标准分辨率是1600*1200 ,85Hz
按照新手指南里面的显卡设置方法安装显卡驱动,安装以后一切正常,但是没有加速,于是我就把xorg.conf里面的nv改成nvidia,结果就是不管注销,还是重启,还是关机,都会花屏死机,但是改回nv就没有问题了。重装过n遍系统了,依然如此(现在就是刚新装的系统),装过dapper也是一样。
我是做三维的,想在linux下用用三维软件,就这个显卡的问题折腾了我好长时间了,麻烦大家帮我解决一下问题,谢谢。

下面是我的xorg.conf的内容

代码: 全选

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/X11/fonts/misc"
	FontPath	"/usr/share/X11/fonts/cyrillic"
	FontPath	"/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/X11/fonts/Type1"
	FontPath	"/usr/share/X11/fonts/CID"
	FontPath	"/usr/share/X11/fonts/100dpi"
	FontPath	"/usr/share/X11/fonts/75dpi"
        # paths to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
	Load	"GLcore"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc104"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"Emulate3Buttons"	"true"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "Device"
	Identifier	"NVIDIA Corporation NV36 [GeForce FX 5700 Ultra]"
	Driver		"nvidia"
	BusID		"PCI:1:0:0"
EndSection

Section "Monitor"
	Identifier	"SyncMaster"
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"NVIDIA Corporation NV36 [GeForce FX 5700 Ultra]"
	Monitor		"SyncMaster"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"2048x1536" "1920x1440" "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"2048x1536" "1920x1440" "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"2048x1536" "1920x1440" "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"2048x1536" "1920x1440" "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"2048x1536" "1920x1440" "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"2048x1536" "1920x1440" "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
EndSection

Section "DRI"
	Mode	0666
EndSection
大家看看是不是有什么设置上面的问题
头像
eexpress
帖子: 58428
注册时间: 2005-08-14 21:55
来自: 长沙
送出感谢: 4 次
接收感谢: 256 次

#2

帖子 eexpress » 2006-05-20 14:05

配置多半看不出。像nvidia的驱动识别你的显卡内存不对。dpkg-reconfigure的似乎,应该会问显存,试试
● 鸣学
sammyy
帖子: 1
注册时间: 2006-05-24 20:38
送出感谢: 0
接收感谢: 0

#3

帖子 sammyy » 2006-05-24 20:43

You need to add HorizSync, VerRefresh in the monitor section of your xorg.conf like the following....

Section "Monitor"
Identifier "CM752ET"
HorizSync 31-101
VertRefresh 60-160
EndSection


Please refer to this thread.
http://ubuntuforums.org/showthread.php?t=83973
头像
嗜血的兔子
帖子: 208
注册时间: 2005-11-11 5:10
送出感谢: 0
接收感谢: 0
联系:

#4

帖子 嗜血的兔子 » 2006-05-26 3:42

不行阿,我换成了你给的数值还是花屏+死机,然后换成我显示器标准的30-110,50-160还是一样的效果,谁有办法解决我的问题阿?
回复

回到 “常用硬件支持”