N卡 Geforce6100安装求救

声卡/显卡/打印机/USB设备等硬件问题(网卡问题请发上面的网卡板块)
回复
头像
dangtianye
帖子: 112
注册时间: 2007-06-03 8:18
来自: WWW.SDU.SDU.SDU.SDU.....
送出感谢: 0
接收感谢: 0

N卡 Geforce6100安装求救

#1

帖子 dangtianye » 2008-10-26 0:18

在nv官网下载的驱动
安装时好像缺少什么模块 但最终没安装好
运行glxinfo | grep rendering显示如下:

代码: 全选

caterpiller@caterpiller-desktop:~$ glxinfo | grep rendering
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Error: couldn't find RGB GLX visual
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
Xlib:  extension "GLX" missing on display ":0.0".
ctrl+alt+back重启后 没看到nv的logo刷新现在为85 但是分辨率仍为800*600
/etc/X11/xorg.conf内容如下

代码: 全选

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"stylus"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"eraser"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"cursor"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"nVidia Corporation C51G [GeForce 6100]"
	Driver		"nvidia"
	BusID		"PCI:0:5:0"
EndSection

Section "Monitor"
	Identifier	"通用显示器"
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"nVidia Corporation C51G [GeForce 6100]"
	Monitor		"通用显示器"
	DefaultDepth	24
	SubSection "Display"
		Modes	 "1024x768" "832x624" "800x600" "720x400" "640x480" "1x1"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"

# Uncomment if you have a wacom tablet
#	InputDevice     "stylus"	"SendCoreEvents"
#	InputDevice     "cursor"	"SendCoreEvents"
#	InputDevice     "eraser"	"SendCoreEvents"
EndSection
不知哪出了问题 请教各位 这个问题都烦死我了
头像
dangtianye
帖子: 112
注册时间: 2007-06-03 8:18
来自: WWW.SDU.SDU.SDU.SDU.....
送出感谢: 0
接收感谢: 0

Re: N卡 Geforce6100安装求救

#2

帖子 dangtianye » 2008-10-26 8:37

弟兄们 拜托了
kinqg
帖子: 14
注册时间: 2007-10-07 15:12
送出感谢: 0
接收感谢: 0

Re: N卡 Geforce6100安装求救

#3

帖子 kinqg » 2008-10-28 14:19

我笔记本集成的是Geforce6100芯片,直接装好ubuntu8.04后分辨率就可以调到1280X800,若不用3D的话,不用再装厂家提供的驱动啊
njjn64
帖子: 12
注册时间: 2007-08-02 13:01
送出感谢: 0
接收感谢: 0

Re: N卡 Geforce6100安装求救

#4

帖子 njjn64 » 2008-10-30 9:31

GF6100安装显卡驱动方式很简单的,直接在终端输入sudo apt-get install nvidia-glx-new 按回车,就可以安装了,然后重起电脑就可以自动识别分辨率了,如果不行可以在受限驱动那里把前面的勾勾上再重起就可以了 
头像
mawith
帖子: 1289
注册时间: 2007-10-21 16:41
来自: GD
送出感谢: 0
接收感谢: 0

Re: N卡 Geforce6100安装求救

#5

帖子 mawith » 2008-10-30 13:39

俺集成的用受限的。。
吼吼
回复

回到 “常用硬件支持”