能否自己手工挂载，就类似于U盘一样访问？
lsusb的输出
代码： 全选
Bus 004 Device 007: ID 04a9:3160 Canon, Inc.
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 046d:c03d Logitech, Inc.
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
dmesg输出
代码： 全选
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-23-generic (buildd@palmer) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Thu Nov 27 18:44:42 UTC 2008 (Ubuntu 2.6.24-23.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7fa000 (usable)
[ 0.000000] BIOS-e820: 000000003f7fa000 - 000000003f7fd000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f7fd000 - 000000003f7fe000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f7fe000 - 000000003f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 119MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 260090) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 260090
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 260090
[ 0.000000] On node 0 totalpages: 260090
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 239 pages used for memmap
[ 0.000000] HighMem zone: 30475 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F5810 checksum 0
[ 0.000000] ACPI: RSDP 000F5810, 0014 (r0 ASUS )
[ 0.000000] ACPI: RSDT 3F7FA000, 0030 (r1 ASUS P4B533-V 42302E31 MSFT 31313031)
[ 0.000000] ACPI: FACP 3F7FA0C0, 0074 (r1 ASUS P4B533-V 42302E31 MSFT 31313031)
[ 0.000000] ACPI: DSDT 3F7FA134, 2872 (r1 ASUS P4B533-V 1000 MSFT 100000B)
[ 0.000000] ACPI: FACS 3F7FD000, 0040
[ 0.000000] ACPI: BOOT 3F7FA030, 0028 (r1 ASUS P4B533-V 42302E31 MSFT 31313031)
[ 0.000000] ACPI: APIC 3F7FA058, 005A (r1 ASUS P4B533-V 42302E31 MSFT 31313031)
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:2 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3f800000:bf400000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258059
[ 0.000000] Kernel command line: root=UUID=5fe2f891-5cb3-4244-bb2c-08540a0241b2 ro quiet locale=zh_CN vga=769
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1980.819 MHz processor.
[ 19.489212] Console: colour dummy device 80x25
[ 19.489217] console [tty0] enabled
[ 19.490110] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 19.491023] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 19.539672] Memory: 1019212k/1040360k available (2178k kernel code, 20388k reserved, 1005k data, 368k init, 122856k highmem)
[ 19.539687] virtual kernel memory layout:
[ 19.539689] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 19.539691] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 19.539692] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 19.539693] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 19.539695] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 19.539696] .data : 0xc0320918 - 0xc041bdc4 (1005 kB)
[ 19.539698] .text : 0xc0100000 - 0xc0320918 (2178 kB)
[ 19.539702] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 19.539779] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 19.619662] Calibrating delay using timer specific routine.. 3965.86 BogoMIPS (lpj=7931739)
[ 19.619709] Security Framework initialized
[ 19.619723] SELinux: Disabled at boot.
[ 19.619746] AppArmor: AppArmor initialized
[ 19.619752] Failure registering capabilities with primary security module.
[ 19.619766] Mount-cache hash table entries: 512
[ 19.619995] Initializing cgroup subsys ns
[ 19.620001] Initializing cgroup subsys cpuacct
[ 19.620022] CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 19.620040] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 19.620044] CPU: L2 cache: 512K
[ 19.620048] CPU: Hyper-Threading is disabled
[ 19.620052] CPU: After all inits, caps: 3febfbff 00000000 00000000 00043080 00000000 00000000 00000000 00000000
[ 19.620071] Compat vDSO mapped to ffffe000.
[ 19.620092] Checking 'hlt' instruction... OK.
[ 19.636228] SMP alternatives: switching to UP code
[ 19.638514] Freeing SMP alternatives: 11k freed
[ 19.638703] Early unpacking initramfs... done
[ 20.090626] ACPI: Core revision 20070126
[ 20.090691] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 20.092205] CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
[ 20.092255] Total of 1 processors activated (3965.86 BogoMIPS).
[ 20.092403] ENABLING IO-APIC IRQs
[ 20.092596] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 20.238582] Brought up 1 CPUs
[ 20.238612] CPU0 attaching sched-domain:
[ 20.238617] domain 0: span 01
[ 20.238620] groups: 01
[ 20.238884] net_namespace: 64 bytes
[ 20.238897] Booting paravirtualized kernel on bare hardware
[ 20.239685] Time: 3:24:02 Date: 01/04/09
[ 20.239721] NET: Registered protocol family 16
[ 20.240031] EISA bus registered
[ 20.240061] ACPI: bus type pci registered
[ 20.242091] PCI: PCI BIOS revision 2.10 entry at 0xf2240, last bus=1
[ 20.242094] PCI: Using configuration type 1
[ 20.242115] Setting up standard PCI resources
[ 20.251383] ACPI: EC: Look up EC in DSDT
[ 20.258315] ACPI: Interpreter enabled
[ 20.258320] ACPI: (supports S0 S1 S4 S5)
[ 20.258341] ACPI: Using IOAPIC for interrupt routing
[ 20.265610] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 20.266169] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ 20.266171] * this clock source is slow. If you are sure your timer does not have
[ 20.266173] * this bug, please use "acpi_pm_good" to disable the workaround
[ 20.266227] PCI: Enabled i801 SMBus device
[ 20.266235] PCI quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
[ 20.266240] PCI quirk: region ec00-ec3f claimed by ICH4 GPIO
[ 20.266654] PCI: Transparent bridge - 0000:00:1e.0
[ 20.266680] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 20.266797] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 20.268584] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 20.268685] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 20.268799] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 20.268912] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 20.269009] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 20.269122] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
[ 20.269220] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 20.269332] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 20.269487] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 20.269537] pnp: PnP ACPI init
[ 20.269549] ACPI: bus type pnp registered
[ 20.274732] pnp: PnP ACPI: found 13 devices
[ 20.274736] ACPI: ACPI bus type pnp unregistered
[ 20.274743] PnPBIOS: Disabled by ACPI PNP
[ 20.275107] PCI: Using ACPI for IRQ routing
[ 20.275111] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 20.294426] NET: Registered protocol family 8
[ 20.294429] NET: Registered protocol family 20
[ 20.294533] AppArmor: AppArmor Filesystem Enabled
[ 20.298407] Time: tsc clocksource has been installed.
[ 20.306453] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 20.306457] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 20.306461] system 00:00: iomem range 0x100000-0x3f7fffff could not be reserved
[ 20.306466] system 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved
[ 20.306470] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 20.306480] system 00:02: ioport range 0xe400-0xe47f has been reserved
[ 20.306484] system 00:02: ioport range 0xe800-0xe81f has been reserved
[ 20.306487] system 00:02: ioport range 0xec00-0xec3f has been reserved
[ 20.306490] system 00:02: ioport range 0x4d6-0x4d6 has been reserved
[ 20.306495] system 00:02: iomem range 0xfff80000-0xffffffff could not be reserved
[ 20.306499] system 00:02: iomem range 0xffb80000-0xffbfffff has been reserved
[ 20.306507] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 20.306522] system 00:0c: ioport range 0x3f0-0x3f1 has been reserved
[ 20.337101] PCI: Bridge: 0000:00:1e.0
[ 20.337107] IO window: b000-bfff
[ 20.337113] MEM window: d6000000-d67fffff
[ 20.337119] PREFETCH window: d7f00000-d7ffffff
[ 20.337136] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 20.337153] NET: Registered protocol family 2
[ 20.374383] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 20.374895] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 20.376218] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 20.377029] TCP: Hash tables configured (established 131072 bind 65536)
[ 20.377035] TCP reno registered
[ 20.386523] checking if image is initramfs... it is
[ 20.837395] Switched to high resolution mode on CPU 0
[ 21.274380] Freeing initrd memory: 7316k freed
[ 21.274628] Simple Boot Flag at 0x3a set to 0x1
[ 21.275229] audit: initializing netlink socket (disabled)
[ 21.275249] audit(1231039442.632:1): initialized
[ 21.275517] highmem bounce pool size: 64 pages
[ 21.278425] VFS: Disk quotas dquot_6.5.1
[ 21.278539] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 21.278753] io scheduler noop registered
[ 21.278757] io scheduler anticipatory registered
[ 21.278760] io scheduler deadline registered
[ 21.278778] io scheduler cfq registered (default)
[ 21.278796] Boot video device is 0000:00:02.0
[ 21.279264] isapnp: Scanning for PnP cards...
[ 21.633005] isapnp: No Plug & Play device found
[ 21.679987] Real Time Clock Driver v1.12ac
[ 21.680122] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 21.680271] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 21.680460] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 21.681421] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 21.681847] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 21.683025] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 21.683127] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 21.683289] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 21.683294] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 21.683930] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 21.687994] mice: PS/2 mouse device common for all mice
[ 21.688172] EISA: Probing bus 0 at eisa.0
[ 21.688212] EISA: Detected 0 cards.
[ 21.688217] cpuidle: using governor ladder
[ 21.688219] cpuidle: using governor menu
[ 21.688358] NET: Registered protocol family 1
[ 21.688401] Using IPI No-Shortcut mode
[ 21.688445] registered taskstats version 1
[ 21.688560] Magic number: 9:955:410
[ 21.688704] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 21.688707] EDD information not available.
[ 21.689222] Freeing unused kernel memory: 368k freed
[ 21.689257] Write protecting the kernel read-only data: 801k
[ 21.719761] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 21.841873] vesafb: framebuffer at 0xd8000000, mapped to 0xf8880000, using 600k, total 8000k
[ 21.841879] vesafb: mode is 640x480x8, linelength=640, pages=24
[ 21.841882] vesafb: scrolling: redraw
[ 21.841886] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
[ 21.842060] Console: switching to colour frame buffer device 80x30
[ 21.843121] fb0: VESA VGA frame buffer device
[ 22.006539] fuse init (API version 7.9)
[ 22.035141] ACPI: Invalid PBLK length [5]
[ 22.035217] ACPI Exception (processor_core-0822): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 22.721457] usbcore: registered new interface driver usbfs
[ 22.721493] usbcore: registered new interface driver hub
[ 22.733807] usbcore: registered new device driver usb
[ 22.747834] USB Universal Host Controller Interface driver v3.0
[ 22.747929] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 22.747944] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 22.747950] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 22.748363] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 22.748398] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d800
[ 22.748596] usb usb1: configuration #1 chosen from 1 choice
[ 22.748633] hub 1-0:1.0: USB hub found
[ 22.748642] hub 1-0:1.0: 2 ports detected
[ 22.813992] SCSI subsystem initialized
[ 22.849721] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
[ 22.849740] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 22.849745] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 22.849778] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 22.849811] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000d400
[ 22.849976] usb usb2: configuration #1 chosen from 1 choice
[ 22.850012] hub 2-0:1.0: USB hub found
[ 22.850021] hub 2-0:1.0: 2 ports detected
[ 22.882147] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 22.895265] libata version 3.00 loaded.
[ 22.953546] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 22.953563] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 22.953569] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 22.953607] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 22.953642] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
[ 22.953803] usb usb3: configuration #1 chosen from 1 choice
[ 22.953837] hub 3-0:1.0: USB hub found
[ 22.953846] hub 3-0:1.0: 2 ports detected
[ 23.057454] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
[ 23.057474] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 23.057479] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 23.057516] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 23.061429] ehci_hcd 0000:00:1d.7: debug port 1
[ 23.061438] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 23.061451] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xd6800000
[ 23.077122] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 23.077332] usb usb4: configuration #1 chosen from 1 choice
[ 23.077369] hub 4-0:1.0: USB hub found
[ 23.077379] hub 4-0:1.0: 6 ports detected
[ 23.181241] ACPI: PCI Interrupt 0000:01:09.0[A] -> GSI 21 (level, low) -> IRQ 20
[ 23.185878] eth0: VIA Rhine II at 0xd6000000, 00:05:5d:e8:f4:7d, IRQ 20.
[ 23.186597] eth0: MII PHY found at address 8, status 0x7869 advertising 05e1 Link 41e1.
[ 23.186992] ata_piix 0000:00:1f.1: version 2.12
[ 23.187013] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 23.187072] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 23.189329] scsi0 : ata_piix
[ 23.190703] scsi1 : ata_piix
[ 23.191313] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 23.191317] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 23.408822] ata1.00: HPA unlocked: 60036479 -> 60036480, native 60036480
[ 23.408830] ata1.00: ATA-5: IBM-DTLA-307030, TX4OA60A, max UDMA/100
[ 23.408834] ata1.00: 60036480 sectors, multi 16: LBA
[ 23.437571] ata1.00: configured for UDMA/100
[ 23.656525] ata2.00: ATA-6: ST3160021A, 8.01, max UDMA/100
[ 23.656531] ata2.00: 312581808 sectors, multi 16: LBA48
[ 23.672469] ata2.00: configured for UDMA/100
[ 23.672651] scsi 0:0:0:0: Direct-Access ATA IBM-DTLA-307030 TX4O PQ: 0 ANSI: 5
[ 23.672848] scsi 1:0:0:0: Direct-Access ATA ST3160021A 8.01 PQ: 0 ANSI: 5
[ 23.747835] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 23.923765] usb 2-2: configuration #1 chosen from 1 choice
[ 23.949042] Driver 'sd' needs updating - please use bus_type methods
[ 23.949171] sd 0:0:0:0: [sda] 60036480 512-byte hardware sectors (30739 MB)
[ 23.949192] sd 0:0:0:0: [sda] Write Protect is off
[ 23.949196] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.949226] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.949296] sd 0:0:0:0: [sda] 60036480 512-byte hardware sectors (30739 MB)
[ 23.949313] sd 0:0:0:0: [sda] Write Protect is off
[ 23.949317] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.949346] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.949351] sda: sda1 sda2 <<6>usbcore: registered new interface driver hiddev
[ 23.986577] sda5 >
[ 23.986726] sd 0:0:0:0: [sda] Attached SCSI disk
[ 23.986824] sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
[ 23.986845] sd 1:0:0:0: [sdb] Write Protect is off
[ 23.986849] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 23.986879] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.986944] sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
[ 23.986960] sd 1:0:0:0: [sdb] Write Protect is off
[ 23.986964] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 23.986994] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.986999] sdb:<6>input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input2
[ 24.003449] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2
[ 24.003478] usbcore: registered new interface driver usbhid
[ 24.003484] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 24.010047] sdb1 sdb2 < sdb5 sdb6 sdb7 >
[ 24.046498] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 24.060726] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 24.060756] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 24.568420] Attempting manual resume
[ 24.568425] swsusp: Resume From Partition 8:5
[ 24.568428] PM: Checking swsusp image.
[ 24.568635] PM: Resume from disk failed.
[ 24.614174] kjournald starting. Commit interval 5 seconds
[ 24.614196] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.914840] Linux agpgart interface v0.102
[ 39.078651] agpgart: Detected an Intel 830M Chipset.
[ 39.078812] agpgart: Detected 8060K stolen memory.
[ 39.113460] agpgart: AGP aperture is 128M @ 0xd8000000
[ 39.205842] i810_smbus 0000:00:02.0: i810/i815 i2c device found.
[ 39.370063] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 39.425884] iTCO_vendor_support: vendor-support=0
[ 39.469862] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 39.470055] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0xe460)
[ 39.470117] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 39.537782] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 39.649410] intel_rng: FWH not detected
[ 39.691146] input: Power Button (FF) as /devices/virtual/input/input3
[ 39.701324] ACPI: Power Button (FF) [PWRF]
[ 39.701506] input: Power Button (CM) as /devices/virtual/input/input4
[ 39.713280] ACPI: Power Button (CM) [PWRB]
[ 40.176982] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 42.296501] parport_pc 00:08: reported by Plug and Play ACPI
[ 42.296560] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 42.810273] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 20
[ 45.160865] lp0: using parport0 (interrupt-driven).
[ 45.246081] Adding 1285160k swap on /dev/sda5. Priority:-1 extents:1 across:1285160k
[ 45.588293] EXT3 FS on sda1, internal journal
[ 47.268649] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 47.649131] PPP generic driver version 2.4.2
[ 47.708292] NET: Registered protocol family 17
[ 47.785192] NET: Registered protocol family 10
[ 47.785569] lo: Disabled Privacy Extensions
[ 48.691451] No dock devices found.
[ 50.180519] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 50.180527] apm: overridden by ACPI.
[ 50.328926] ppdev: user-space parallel port driver
[ 50.628666] audit(1231039472.611:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4918 profile="/usr/sbin/cupsd" namespace="default"
[ 52.240750] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 55.019381] [drm] Initialized drm 1.1.0 20060810
[ 55.024620] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 55.024634] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 55.024749] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 55.026448] [drm:i915_getparam] *ERROR* Unknown parameter 5
[ 100.236511] NET: Registered protocol family 24
[ 2295.528687] usb 4-6: new high speed USB device using ehci_hcd and address 3
[ 2295.666786] usb 4-6: configuration #1 chosen from 1 choice