当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 13 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : 请教-NV显卡7300,系统重启后自动恢复默认的800X600!!
帖子发表于 : 2009-04-27 19:08 

注册: 2009-04-20 17:12
帖子: 1
送出感谢: 0 次
接收感谢: 0 次
我NV7300的显卡驱动安装好了,已经可以通过NVIDIA X Server Settings,设置1024X768模式,可以正常使用3D效果,但是一重启,又回到了默认800X600,请教!


页首
 用户资料  
 
2 楼 
 文章标题 : Re: 请教-NV显卡7300,系统重启后自动恢复默认的800X600!!
帖子发表于 : 2009-04-27 23:07 

注册: 2009-04-27 22:57
帖子: 1
送出感谢: 0 次
接收感谢: 0 次
我和你一样,咋办呢 :em20


页首
 用户资料  
 
3 楼 
 文章标题 : Re: 请教-NV显卡7300,系统重启后自动恢复默认的800X600!!
帖子发表于 : 2009-04-27 23:12 
头像

注册: 2008-12-13 19:39
帖子: 13284
地址: 物华天宝人杰地灵
送出感谢: 1
接收感谢: 6
先在纯终端运行配置命令,nvidia-xconfig 会生成完全的Xorg.conf文件,然后修改之。更详细请到硬件支持板块找置顶贴。 :em09


_________________
行到水穷处,坐看云起时。
海内生明月,天涯共此夕。
--------------------吾本独!


页首
 用户资料  
 
4 楼 
 文章标题 : Re: 请教-NV显卡7300,系统重启后自动恢复默认的800X600!!
帖子发表于 : 2009-04-28 1:38 
头像

注册: 2008-09-21 23:06
帖子: 324
送出感谢: 0 次
接收感谢: 1
wangdu2002 写道:
先在纯终端运行配置命令,nvidia-xconfig 会生成完全的Xorg.conf文件,然后修改之。更详细请到硬件支持板块找置顶贴。 :em09


代码:
sudo dpkg-reconfigure -phigh xserver-xorg


_________________
某年某月的某一天,我正在Ubuntu下面以70码的低速度飙车,感觉不爽,于是向其索要服务,把它强行推坐在Windows里面,于是Ubuntu患了抑郁症,我决定人性化拆除之,结果硬盘坍塌,酿成了人间惨剧.....


页首
 用户资料  
 
5 楼 
 文章标题 : Re: 请教-NV显卡7300,系统重启后自动恢复默认的800X600!!
帖子发表于 : 2009-04-29 9:29 

注册: 2009-04-28 10:18
帖子: 8
送出感谢: 0 次
接收感谢: 0 次
我也是这个问题,很郁闷,我是N卡的7600GS,试过了nvidia-xconfig,它生成了xorg.conf,如下:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Mon Mar 23 15:33:27 PST 2009

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection

Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection

但是问题依旧。每次重启都要用nvidia x server settings改一下分辨率,从默认的800*600改到1440*900。3D效果都能用,但是就是每次重启都要改,很麻烦。
我昨天刚装ubuntu,是个菜菜鸟,其他问题差不多都搞定了,就是这个问题一直没办法,心情备受打击阿,请各位帮忙看一下,万分感激!


页首
 用户资料  
 
6 楼 
 文章标题 : Re: 请教-NV显卡7300,系统重启后自动恢复默认的800X600!!
帖子发表于 : 2009-04-30 10:26 

注册: 2009-04-30 10:20
帖子: 3
送出感谢: 0 次
接收感谢: 0 次
我也遇到了大致同样的问题,使用显卡NV GeForce7025,使用root用户可以正常加载,但在普通用户下就会出现问题,在网上找了各种可能的问题,都没有解决。
以下是启动后的log文件:
(II) NVIDIA(0): Setting mode "1024x768+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "cn"
(**) AT Translated Set 2 keyboard: xkb_layout: "cn"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device ImPS/2 Generic Wheel Mouse
(**) ImPS/2 Generic Wheel Mouse: always reports core events
(**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event5"
(II) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
(**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE)
(**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
(**) ImPS/2 Generic Wheel Mouse: (accel) filter chain progression: 2.00
(**) ImPS/2 Generic Wheel Mouse: (accel) filter stage 0: 20.00 ms
(**) ImPS/2 Generic Wheel Mouse: (accel) set acceleration profile 0
(II) NVIDIA(0): Setting mode "800x600_85_0"
qzy@ubuntu:~$
分析可以发现已经加载了显卡的设置,但最后被修改了,不知道为什么?
对于ubuntu也是刚开始用。
以下是我的xorg.conf
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "LG F710B"
HorizSync 30.0 - 95.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7025 / NVIDIA nForce 630a"
EndSection

Section "Screen"

# Removed Option "metamodes" "1024x768 +0+0; nvidia-auto-select +0+0"
# Removed Option "metamodes" "1024x768_75 +0+0; 1024x768 +0+0; nvidia-auto-select +0+0"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "1024x768 +0+0; 1024x768_75 +0+0; nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
好像没有什么问题阿


页首
 用户资料  
 
7 楼 
 文章标题 : Re: 请教-NV显卡7300,系统重启后自动恢复默认的800X600!!
帖子发表于 : 2009-04-30 11:21 

注册: 2009-04-28 10:18
帖子: 8
送出感谢: 0 次
接收感谢: 0 次
帮顶,希望强人解答阿!


页首
 用户资料  
 
8 楼 
 文章标题 : Re: 请教-NV显卡7300,系统重启后自动恢复默认的800X600!!
帖子发表于 : 2009-04-30 14:56 
头像

注册: 2006-11-28 17:27
帖子: 71
地址: ShunDe,Foshan,GuangDong,China
送出感谢: 0 次
接收感谢: 0 次
如果是NV的卡安装好驱动以后,命令行运行 sudo nvidia-setting ,然后选择好自己需要的分辨率,然后选择Save to X configuration File,重新启动X,应该就没问题了。 :em11


页首
 用户资料  
 
9 楼 
 文章标题 : Re: 请教-NV显卡7300,系统重启后自动恢复默认的800X600!!
帖子发表于 : 2009-04-30 15:30 

注册: 2009-04-30 10:20
帖子: 3
送出感谢: 0 次
接收感谢: 0 次
已经按照你说的那样试过了,在我的机子上是不起作用的。


页首
 用户资料  
 
10 楼 
 文章标题 : Re: 请教-NV显卡7300,系统重启后自动恢复默认的800X600!!
帖子发表于 : 2009-04-30 15:32 

注册: 2009-04-30 10:20
帖子: 3
送出感谢: 0 次
接收感谢: 0 次
wolfmei 写道:
如果是NV的卡安装好驱动以后,命令行运行 sudo nvidia-setting ,然后选择好自己需要的分辨率,然后选择Save to X configuration File,重新启动X,应该就没问题了。 :em11

在我的机子上这个方法不奏效。 :em20


页首
 用户资料  
 
11 楼 
 文章标题 : Re: 请教-NV显卡7300,系统重启后自动恢复默认的800X600!!
帖子发表于 : 2009-04-30 17:45 
头像

注册: 2006-11-28 17:27
帖子: 71
地址: ShunDe,Foshan,GuangDong,China
送出感谢: 0 次
接收感谢: 0 次
baiyundian 写道:
我也遇到了大致同样的问题,使用显卡NV GeForce7025,使用root用户可以正常加载,但在普通用户下就会出现问题,在网上找了各种可能的问题,都没有解决。
以下是启动后的log文件:
(II) NVIDIA(0): Setting mode "1024x768+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "cn"
(**) AT Translated Set 2 keyboard: xkb_layout: "cn"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device ImPS/2 Generic Wheel Mouse
(**) ImPS/2 Generic Wheel Mouse: always reports core events
(**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event5"
(II) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
(**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE)
(**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
(**) ImPS/2 Generic Wheel Mouse: (accel) filter chain progression: 2.00
(**) ImPS/2 Generic Wheel Mouse: (accel) filter stage 0: 20.00 ms
(**) ImPS/2 Generic Wheel Mouse: (accel) set acceleration profile 0
(II) NVIDIA(0): Setting mode "800x600_85_0"
qzy@ubuntu:~$
分析可以发现已经加载了显卡的设置,但最后被修改了,不知道为什么?
对于ubuntu也是刚开始用。
以下是我的xorg.conf
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "LG F710B"
HorizSync 30.0 - 95.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7025 / NVIDIA nForce 630a"
EndSection

Section "Screen"

# Removed Option "metamodes" "1024x768 +0+0; nvidia-auto-select +0+0"
# Removed Option "metamodes" "1024x768_75 +0+0; 1024x768 +0+0; nvidia-auto-select +0+0"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "1024x768 +0+0; 1024x768_75 +0+0; nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
好像没有什么问题阿

Screen这个里面的东西太复杂了吧?
改成
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "1024x768_75 +0+0 “
SubSection "Display"
Depth 24
EndSubSection
EndSection
尝试下


页首
 用户资料  
 
12 楼 
 文章标题 : Re: 请教-NV显卡7300,系统重启后自动恢复默认的800X600!!
帖子发表于 : 2009-05-01 9:15 
头像

注册: 2007-11-06 5:59
帖子: 89
地址: Hu Nan
系统: Ubuntu 13.04
送出感谢: 1
接收感谢: 2
chirac561 写道:
我也是这个问题,很郁闷,我是N卡的7600GS,试过了nvidia-xconfig,它生成了xorg.conf,如下:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Mon Mar 23 15:33:27 PST 2009

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection

Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection

但是问题依旧。每次重启都要用nvidia x server settings改一下分辨率,从默认的800*600改到1440*900。3D效果都能用,但是就是每次重启都要改,很麻烦。
我昨天刚装ubuntu,是个菜菜鸟,其他问题差不多都搞定了,就是这个问题一直没办法,心情备受打击阿,请各位帮忙看一下,万分感激!


我的情况和这位兄弟一样
我的是ASUS EN7600GS + AOC 917VW+
以前用ubuntu 8.10时候每次开机是1024*768
现在ubuntu 9.04装驱动之前是800*600
装了180.51之后,直接开机变成了640*480了,没得调
希望高手解答啊......


_________________
兵法的精要在于韬晦自己


页首
 用户资料  
 
13 楼 
 文章标题 : Re: 请教-NV显卡7300,系统重启后自动恢复默认的800X600!!
帖子发表于 : 2009-05-02 13:05 
头像

注册: 2007-11-06 5:59
帖子: 89
地址: Hu Nan
系统: Ubuntu 13.04
送出感谢: 1
接收感谢: 2
我的通过改xorg.conf文件已经基本搞定了
改了以下几个地方:

HorizSync 28.0 - 33.0 (数字不一样,具体的不记得了)
VertRefresh 43.0 - 72.0(数字不一样,具体的不记得了)


SubSection "Display"
Depth 24
Modes "1440*900_60.00"
EndSubSection

现在开机是1440*900,但是在nvidia X config里面可以选择很大的1960*1200都可以,所以只好在菜单里面删除了Nvidia X config server 项目


_________________
兵法的精要在于韬晦自己


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 13 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 4 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译