各位的sis显卡是怎么配置的?

声卡/显卡/打印机/USB设备等硬件问题(网卡问题请发上面的网卡板块)
回复
LinuxRen
帖子: 112
注册时间: 2005-10-10 8:30
送出感谢: 0
接收感谢: 0

各位的sis显卡是怎么配置的?

#1

帖子 LinuxRen » 2006-07-19 17:50

集成的显卡

lspci -v 后得到下面的东东

看不懂显卡到底是哪个型号的

怎么配置相应的驱动呢?

好像6.06以前的版本都支持的好好的,6.06怎么一下不支持了?

0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 661FX/M661FX/M661MX H ost (rev 11)
Subsystem: CLEVO/KAPOK Computer: Unknown device 0360
Flags: bus master, medium devsel, latency 64
Memory at e0000000 (32-bit, non-prefetchable)
Capabilities: [c0] AGP version 3.5

0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 00009000-00009fff
Memory behind bridge: e4100000-e41fffff
Prefetchable memory behind bridge: e8000000-efffffff

0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media I O] (rev 25)
Flags: bus master, medium devsel, latency 0

0000:00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
Flags: medium devsel
I/O ports at 8100

0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 [Master])
Subsystem: CLEVO/KAPOK Computer: Unknown device 0360
Flags: bus master, medium devsel, latency 128, IRQ 185
I/O ports at 1000

0000:00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) (prog-if 00 [Generic])
Subsystem: CLEVO/KAPOK Computer: Unknown device 0360
Flags: medium devsel, IRQ 177
I/O ports at 1400
I/O ports at 1080
Capabilities: [48] Power Management version 2

0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
Subsystem: CLEVO/KAPOK Computer: Unknown device 0360
Flags: bus master, medium devsel, latency 173, IRQ 177
I/O ports at 1c00
I/O ports at 1800
Capabilities: [48] Power Management version 2

0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: CLEVO/KAPOK Computer: Unknown device 0360
Flags: bus master, medium devsel, latency 64, IRQ 193
Memory at e4000000 (32-bit, non-prefetchable)

0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: CLEVO/KAPOK Computer: Unknown device 0360
Flags: bus master, medium devsel, latency 64, IRQ 201
Memory at e4001000 (32-bit, non-prefetchable)

0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI])
Subsystem: Silicon Integrated Systems [SiS] USB 2.0 Controller
Flags: bus master, medium devsel, latency 64, IRQ 209
Memory at e4002000 (32-bit, non-prefetchable)
Capabilities: [50] Power Management version 2

0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fa st Ethernet (rev 91)
Subsystem: CLEVO/KAPOK Computer: Unknown device 0360
Flags: bus master, medium devsel, latency 173, IRQ 217
I/O ports at 2000 [size=256]
Memory at e4003000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 44000000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2

0000:00:0e.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 0 1)
Subsystem: CLEVO/KAPOK Computer: Unknown device 0360
Flags: bus master, medium devsel, latency 168, IRQ 177
Memory at 44020000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 40000000-41fff000 (prefetchable)
Memory window 1: 42000000-43fff000
I/O window 0: 00002400-000024ff
I/O window 1: 00002800-000028ff
16-bit legacy interface ports at 0001

0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741 /760/761 PCI/AGP VGA Display Adapter (prog-if 00 [VGA])
Subsystem: CLEVO/KAPOK Computer: Unknown device 0360
Flags: 66MHz, medium devsel, IRQ 10
BIST result: 00
Memory at e8000000 (32-bit, prefetchable) [size=128M]
Memory at e4100000 (32-bit, non-prefetchable) [size=128K]
I/O ports at 9000 [size=128]
Capabilities: [40] Power Management version 2
Capabilities: [50] AGP version 3.0
[/code]
头像
yg4158
帖子: 44
注册时间: 2005-08-01 9:45
送出感谢: 0
接收感谢: 0

我也是sis主板

#2

帖子 yg4158 » 2006-07-20 10:15

怎么配置显卡760的
tiger81
帖子: 80
注册时间: 2006-07-15 12:09
送出感谢: 0
接收感谢: 0

#3

帖子 tiger81 » 2006-07-20 15:34

是呀,我的sis760怎么装驱动啊?
tiger81
帖子: 80
注册时间: 2006-07-15 12:09
送出感谢: 0
接收感谢: 0

#4

帖子 tiger81 » 2006-07-20 16:16

刚才在sis官方网站看了,760好像linux内核都直接支持的,也就是说大家的驱动默认装完系统就都有了 。
不过有没有人在sis上装成功过xgl啊?试了一下午没搞定!
头像
yg4158
帖子: 44
注册时间: 2005-08-01 9:45
送出感谢: 0
接收感谢: 0

3D加速没有

#5

帖子 yg4158 » 2006-07-21 9:12

用glxinfo | grep rendering查看說3D没有加速呀
tiger81
帖子: 80
注册时间: 2006-07-15 12:09
送出感谢: 0
接收感谢: 0

#6

帖子 tiger81 » 2006-07-21 18:49

我的显卡是sis760,怎么装驱动啊?能用xgl吗?
tiger81
帖子: 80
注册时间: 2006-07-15 12:09
送出感谢: 0
接收感谢: 0

有希望了!

#7

帖子 tiger81 » 2006-07-21 21:56

先查看你系统的信息:
X -version
gcc -v
从http://www.winischhofer.eu/linuxsispart4.shtml#download下载最新的驱动
我下载的是 X.org 6.9.0 (gcc 4.x; should work for 7.0 as well)

Installation:


* Extract the downloaded archive file. The archive contains only one file named "sis_drv.o" (starting with X.org 6.9.0, this file is called "sis_drv.so").
* Starting from X.org 6.9, you MUST stop X.org before proceeding.
* Copy "sis_drv.o" (sis_drv.so for X.org 6.9 and later) over the existing one which usually is located at /usr/lib/xorg/modules/drivers.
* (Re-)start X.org/XFree86. If you get "unresolved symbol" errors when starting X.org/XFree86, you chose the wrong version.

我把sis_drv.o拷过去了,reboot后没效果啊!
怎么stop X.org啊?怎么(Re-)start X.org/XFree86啊?
torfy
帖子: 3
注册时间: 2006-07-23 14:02
送出感谢: 0
接收感谢: 0

#8

帖子 torfy » 2006-07-23 14:05

sudo dpkg-reconfigure xserver-xorg

选sis的驱动试试,系统默认的是vesa
maikafei
帖子: 370
注册时间: 2006-03-22 3:42
送出感谢: 0
接收感谢: 0

#9

帖子 maikafei » 2007-12-02 23:16

sis661 怎么解决? help me :oops:
回复

回到 “常用硬件支持”