硬盘全新安装ubuntu 9.04版没有声音？？？

[jy3344511]

硬盘全新安装ubuntu 9.04版没有声音？？？我用的集成声卡Realtek ALc883，请教高手怎么解决啊？？？？ 如果要安装声卡驱动的话，请提供详细的安装方式和声卡驱动，谢谢！！！！！

[clear119]

看这：http://zcha.com/index.php?hl=f5&q=uggc% ... nygrx.ugzy

下载地址驱动：http://www.realtek.com/downloads/downlo ... Down=false

[jy3344511]

已下载声卡驱动LinuxPkg_5.11.tar.bz2，求详细的安装方式 ，压缩包里的说明文件看不懂阿？？？

[jy3344511]

这是压缩包里的 说明文件

The source code copy from www.alsa-project.org. ver:3.3-4
Linux Source Code for ALC audio codec
Support Codec list:
====AC97 Codec=====
ALC100,100P
ALC200,200P
ALC650D
ALC650E
ALC650F
ALC650
ALC655
ALC653
ALC658
ALC658D
ALC850
ALC101
ALC202
ALC250
ALC203

====HD Audio codec ====
ALC260
ALC262
ALC267
ALC268
ALC269
ALC272
ALC660
ALC660VD
ALC662
ALC663
ALC861
ALC861VD
ALC880
ALC882
ALC883
ALC885
ALC888
ALC889A

Installation:
This Source Code is from www.alsa-project.org.
For OS installation, please remember add the Development tool kit.
For driver installation, please follow below steps.

Automatic install: (Recommend RedHat distribution)
execute

./install

Note: Ubuntu OS, please use manual install.
Run commands need to add sudo at first words.

Manual install:
Step 1. unzip source code
tar xfvj alsa-driver-1.0.xx.tar.bz2

Step 2. Turn on sound support from kernel config
(soundcore module, default turn on)

Step 3. Complied source code
a. cd alsa-driver-1.0.xx
b. ./configure
c. make
d. make install
e. alsaconf
f. ./snddevices (Only kernel 2.4 does it)

Step 4. Edit your /etc/modules.conf or conf.modules depending on the distribution
(Please refer to the attached modules.conf)

snd-xxxx is the card ID.

-- Azalia controller --ALC880 ALC882 ALC260 ALC262 ALC883 ALC885 ALC888
--- Intel ICH6 ICH7 ---------
snd-hda-intel

-- AC97 controller --ALC655 ALC650 ALC250 ALC255
--- Intel ICH6 ICH7 , SiS 7012 and NVidia----------
snd-intel8x0
--- Via8233 Via686a -------------------------------
snd-via82xx
--- ATI Chipset -------------------------------
snd-atiixp

Copy and paste this to the bottom of your /etc/modules.conf or /etc/modprobe.conf file.
# ALSA portion
alias char-major-116 snd
alias snd-card-0 snd-xxxx
# OSS/Free portion
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
# card #1
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss

Step 5. reboot your machine

Step 6. Use the alsamixer the disable mute (All audio line default is mute)
*Must to compile and to install the ALSA library and utility. (Use automatic install is already install)
excute alsamixer

Note: 1. The most detail information, can refer the alsa-kernel/Documenttation/ALSA-Configuration.txt in the azx-021705.tar.bz2.
2. Kernel Version must be 2.2.14 or later.
3. All mixer channels are muted by default. You must use a native
or OSS mixer program to unmute appropriate channels.
4. If can not compile the source code, try to rename the /usr/src/linux-2.x -> /usr/src/linux.
5. The driver added to support the SPDIF functoin.
6. a. You can download the alsa-lib-1.0.9 and alsa-utils-1.0.9a form the www.alsa-project.org, then unzip and install them.
b. Suggest use "alsamixer" to control mixer function.
c. Used "alsaconf" can autodetect which drive you need to install (step 4).
7. SUSE Distribution must install the ncurses package.

[clear119]

不是写的很清楚了嘛，幸运的话到Step 3就有声音了，如果还没声，那就Step 4再开始配置/etc/modules.conf （$sudo gedit /etc/modules.conf ），（snd-xxxx is the card ID）下面有说明，如果你是ｉｎｔｅｌ芯片组的，那就是snd-hda-intel，ＡＭＤ的，就是snd-atiixp，然后加入
# ALSA portion
alias char-major-116 snd
alias snd-card-0 snd-xxxx
# OSS/Free portion
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
# card #1
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss

别忘了ｓｎｄ－ＸＸＸＸ替换

[想入非非]

很少听说还要手动编译声卡驱动的？

[opp]

我的已经有声音了，默认的驱动，其实我心理怪痒痒的，我也想装原驱动。
我的是技嘉的主板，声卡是ALC889A的，在考虑要不要装，我怕装了反而不出声就麻烦了。不装默认的声音又比较小。
矛盾啊，呵呵。