装了nvidia的驱动后分辨率上不去了

[qchem]

用自带的nv驱动没有问题，装了nvidia的驱动就不行了

Xorg.log里有这样的提示
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): NVIDIA GPU GeForce2 MX/MX 400 at PCI:1:0:0
(--) NVIDIA(0): VideoRAM: 32768 kBytes
(--) NVIDIA(0): VideoBIOS: 03.11.00.18.00
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): Interlaced video modes are not supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce2 MX/MX 400 at
(--) NVIDIA(0): PCI:1:0:0:
(--) NVIDIA(0): @@@ (CRT-0)
(--) NVIDIA(0): @@@ (CRT-0): 350.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(WW) NVIDIA(0): No valid modes for "1024x768"; removing.
(WW) NVIDIA(0): No valid modes for "800x600"; removing.
(WW) NVIDIA(0): No valid modes for "640x480"; removing.
(WW) NVIDIA(0):
(WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
(WW) NVIDIA(0): "nvidia-auto-select".
(WW) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 800 x 600
(++) NVIDIA(0): DPI set to (100, 100); computed from -dpi X commandline option
(--) Depth 24 pixmap format is 32 bpp

模式不支持，请问应该怎样处理？

谢谢

[ghqxx]

具体不是很清楚，请自己去查看
nvidia官方有两种类型的驱动，不要弄错，装错了就没辙了

[xiehuoli]

去找找论坛以前的帖子。好像有解决的