Gforce go 6600,装驱动求助(已解决)

声卡/显卡/打印机/USB设备等硬件问题(网卡问题请发上面的网卡板块)
回复
kcsn
帖子: 30
注册时间: 2006-09-01 21:41
送出感谢: 0
接收感谢: 0

Gforce go 6600,装驱动求助(已解决)

#1

帖子 kcsn » 2006-09-03 22:48

我的显卡型号是gforce go 6600 64mb,我安装过nvidia-glx,以及官方的两个驱动7xxx,8xxx.但是只要我把xorg。conf里driver改成nvidia,重启x就出错进不去,而且glxgears命令返回“Xlib: extension "GLX" missing on display ":0.0".
Error: couldn't get an RGB, Double-buffered visual”

Xorg.0.log:
(**) NVIDIA(0): Depth 16, (--) framebuffer bpp 16
(==) NVIDIA(0): RGB weight 565
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module! Please ensure
(EE) NVIDIA(0): that there is a supported NVIDIA GPU in this system, and
(EE) NVIDIA(0): that the NVIDIA device files have been created properly.
(EE) NVIDIA(0): Please consult the NVIDIA README for details.
(EE) NVIDIA(0): *** Aborting ***
(II) UnloadModule: "nvidia"
(II) UnloadModule: "ramdac"
(II) UnloadModule: "fb"
(EE) Screen(s) found, but none have a usable configuration.

但是我用adept安装了nvidia-kernel-common,nvidia-kernel-source

问题原因:一安装的nvidia-kernel与新驱动版本号不符。
解决方法:
1。sudo apt-get remove nvidia-kernel-common nvidia-kernel-source
2. sudo sh NVIDIA-Linux-x86-1.0-8774-pkg1.run ----extract-only
3. cd NVIDIA-Linux-x86-1.0-8774-pkg1/usr/src/nv
4 sudo make module
5 sudo make install

reboot
slwy
帖子: 12
注册时间: 2006-03-29 18:11
送出感谢: 0
接收感谢: 0

[问题]我试了下,不行呀

#2

帖子 slwy » 2006-09-05 1:24

到sudo make module这一步就不行了,
提示:见附件
附件
Screenshot-1.png
kcsn
帖子: 30
注册时间: 2006-09-01 21:41
送出感谢: 0
接收感谢: 0

#3

帖子 kcsn » 2006-09-05 12:21

你看该目录下readme,他确实是这么说明的
回复

回到 “常用硬件支持”