当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 5 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : 能不能分开设置显示器的DPI?
帖子发表于 : 2009-11-01 14:32 
头像

注册: 2006-06-14 6:12
帖子: 266
送出感谢: 0 次
接收感谢: 0 次
先说下我的情况
笔记本+19寸外接显示器组成双屏(TwinView)
显卡 nvidia 8600mgt

(屏幕1)本本的屏幕只有15.4寸,但分辨率1680*1050
(屏幕2)外接19寸显示器分辨率1400*900

本本的屏幕(屏幕1)字体太小了点,特别是和外接19寸(屏幕2)对比起来。把一个窗口从(屏幕2)拖到(屏幕1)文字一下变小很多,这让人很不适应
如果我设置DPI的话两个屏幕都会受影响
有没有办法分开设置两个屏幕的DPI?

或者有别的解决办法也行

重新生成了一份xorg.conf,这样比较清楚
xorg.conf
代码:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildd@palmer)  Sun Feb  1 20:21:04 UTC 2009

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder63)  Fri Aug 14 17:54:58 PDT 2009

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Acer AL1916W"
    HorizSync       31.0 - 84.0
    VertRefresh     56.0 - 76.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8600M GT"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "1"
    Option         "TwinViewXineramaInfoOrder" "DFP-0"
    Option         "metamodes" "CRT: 1440x900_60 +1680+0, DFP: 1680x1050_60 +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection


附图


附件:
文件注释: 全屏幕截图,右下角少一块是因为屏幕2分辨率比屏幕1低
screenshot_2009-11-01-001.jpg
screenshot_2009-11-01-001.jpg [ 224.1 KiB | 被浏览 1026 次 ]

文件注释: 外接19寸屏幕(屏幕2)
screenshot_001.png
screenshot_001.png [ 125.92 KiB | 被浏览 1026 次 ]

文件注释: 本本屏幕(屏幕1)
screenshot_002.png
screenshot_002.png [ 124.69 KiB | 被浏览 1026 次 ]



_________________
This APT has Super Cow Powers
=======================
Asus G1s: t7500 + 2g ddr667 + 8600mgt with 256ddr3 + 500g sata
Asus G51JX-A1: i7 720 + 8G DDR3 + GTS360 + 500G
MacBook Pro 13"
=======================
页首
 用户资料  
 
2 楼 
 文章标题 : Re: 能不能分开设置显示器的DPI?
帖子发表于 : 2009-11-01 15:16 
头像

注册: 2006-06-14 6:12
帖子: 266
送出感谢: 0 次
接收感谢: 0 次
我尝试着修改xorg.conf
但不知道什么地方错了,重启x后屏幕2不工作

xorg.conf.modified
代码:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildd@palmer)  Sun Feb  1 20:21:04 UTC 2009

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder63)  Fri Aug 14 17:54:58 PDT 2009

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

#本本的显示器
Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Seiko"
    HorizSync       30.0 - 75.0
    VertRefresh     60.0
    Option         "DPMS"
EndSection

#外接的显示器
Section "Monitor"
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "Acer AL1916W"
    HorizSync       31.0 - 84.0
    VertRefresh     60.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8600M GT"
EndSection

#本本的屏幕(屏幕1)
Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "1680x1050_60 +0+0; nvidia-auto-select +0+0"
    Option         "DPI" "126 x 126"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

#外接的屏幕(屏幕2)
Section "Screen"
    Identifier     "Screen1"
    Device         "Device0"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "TwinView" "1"
    Option         "TwinViewXineramaInfoOrder" "DFP-0"
    Option         "metamodes" "CRT: 1440x900_60 +1680+0, DFP: 1680x1050_60 +0+0"
    Option         "DPI" "96 x 96"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection


_________________
This APT has Super Cow Powers
=======================
Asus G1s: t7500 + 2g ddr667 + 8600mgt with 256ddr3 + 500g sata
Asus G51JX-A1: i7 720 + 8G DDR3 + GTS360 + 500G
MacBook Pro 13"
=======================


页首
 用户资料  
 
3 楼 
 文章标题 : Re: 能不能分开设置显示器的DPI?
帖子发表于 : 2009-11-01 15:55 
头像

注册: 2006-06-14 6:12
帖子: 266
送出感谢: 0 次
接收感谢: 0 次
Xorg.0.log
代码:

X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux Titan 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 i686
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.31-14-generic root=UUID=36330258-6d73-464d-b936-692cadf87367 ro quiet splash
Build Date: 26 October 2009  05:15:02PM
xorg-server 2:1.6.4-2ubuntu4 (buildd@)
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov  1 15:10:51 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
   Entry deleted from font path.
(==) FontPath set to:
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/100dpi/:unscaled,
   /usr/share/fonts/X11/75dpi/:unscaled,
   /usr/share/fonts/X11/Type1,
   /usr/share/fonts/X11/100dpi,
   /usr/share/fonts/X11/75dpi,
   /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
   built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
   X.Org ANSI C Emulation: 0.4
   X.Org Video Driver: 5.0
   X.Org XInput driver : 4.0
   X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0:1:0:0) 10de:0407:1043:1515 nVidia Corporation G84 [GeForce 8600M GT] rev 161, Mem @ 0xfc000000/16777216, 0xc0000000/268435456, 0xfa000000/33554432, I/O @ 0x00009c00/128, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
   [0] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [5] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
   compiled for 1.6.4, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
   compiled for 1.6.4, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
   compiled for 4.0.2, module version = 1.0.0
   Module class: X.Org Server Extension
(II) NVIDIA GLX Module  185.18.36  Fri Aug 14 17:50:12 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
   compiled for 1.6.4, module version = 1.13.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
   compiled for 1.6.4, module version = 1.0.0
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
   compiled for 1.6.4, module version = 1.1.0
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
   compiled for 4.0.2, module version = 1.0.0
   Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver  185.18.36  Fri Aug 14 17:24:40 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
   compiled for 1.6.4, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
   compiled for 1.6.4, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
   [0] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [5] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "1680x1050_60 +0+0; nvidia-auto-select +0+0"
(**) NVIDIA(0): Option "DPI" "126 x 126"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 8600M GT (G84) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 60.84.41.00.12
(II) NVIDIA(0): Detected PCI Express Link width: 1X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 8600M GT at PCI:1:0:0:
(--) NVIDIA(0):     Acer AL1916W (CRT-0)
(--) NVIDIA(0):     Seiko (DFP-0)
(--) NVIDIA(0): Acer AL1916W (CRT-0): 400.0 MHz maximum pixel clock
(--) NVIDIA(0): Seiko (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): Seiko (DFP-0): Internal Dual Link LVDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "1680x1050_60+0+0"
(II) NVIDIA(0):     "nvidia-auto-select+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
(**) NVIDIA(0): DPI set to (126, 126); computed from "DPI" X config option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
   [0] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [5] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) NVIDIA(0):     enough to receive ACPI display change hotkey events.
(II) NVIDIA(0): Setting mode "1680x1050_60+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
   compiled for 1.6.4, module version = 2.2.5
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 4.0
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event6"
(II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
(II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
(II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
(II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
(**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
(**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
(**) Logitech USB-PS/2 Optical Mouse: (accel) filter chain progression: 2.00
(**) Logitech USB-PS/2 Optical Mouse: (accel) filter stage 0: 20.00 ms
(**) Logitech USB-PS/2 Optical Mouse: (accel) set acceleration profile 0
(II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
(II) config/hal: Adding input device USB2.0 1.3M UVC WebCam
(**) USB2.0 1.3M UVC WebCam: always reports core events
(**) USB2.0 1.3M UVC WebCam: Device: "/dev/input/event9"
(II) USB2.0 1.3M UVC WebCam: Found keys
(II) USB2.0 1.3M UVC WebCam: Configuring as keyboard
(II) XINPUT: Adding extended input device "USB2.0 1.3M UVC WebCam" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
   compiled for 1.6.4, module version = 1.1.2
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.2
(**) Option "Device" "/dev/input/event8"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Asus Laptop extra buttons
(**) Asus Laptop extra buttons: always reports core events
(**) Asus Laptop extra buttons: Device: "/dev/input/event7"
(II) Asus Laptop extra buttons: Found keys
(II) Asus Laptop extra buttons: Configuring as keyboard
(II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event1"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event3"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) NVIDIA(0): Setting mode
(II) NVIDIA(0):     "CRT-0:1440x900_60@1440x900+1680+0,DFP-0:1680x1050_60@1680x1050+0+0"
(II) config/hal: removing device Logitech USB-PS/2 Optical Mouse
(II) Logitech USB-PS/2 Optical Mouse: Close
(II) UnloadModule: "evdev"
(II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event6"
(II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
(II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
(II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
(II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
(**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
(**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
(**) Logitech USB-PS/2 Optical Mouse: (accel) filter chain progression: 2.00
(**) Logitech USB-PS/2 Optical Mouse: (accel) filter stage 0: 20.00 ms
(**) Logitech USB-PS/2 Optical Mouse: (accel) set acceleration profile 0
(II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
(II) config/hal: removing device Logitech USB-PS/2 Optical Mouse
(II) Logitech USB-PS/2 Optical Mouse: Close
(II) UnloadModule: "evdev"
(II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event6"
(II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
(II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
(II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
(II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
(**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
(**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
(**) Logitech USB-PS/2 Optical Mouse: (accel) filter chain progression: 2.00
(**) Logitech USB-PS/2 Optical Mouse: (accel) filter stage 0: 20.00 ms
(**) Logitech USB-PS/2 Optical Mouse: (accel) set acceleration profile 0
(II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
(II) USB2.0 1.3M UVC WebCam: Close
(II) UnloadModule: "evdev"
(II) UnloadModule: "synaptics"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Asus Laptop extra buttons: Close
(II) UnloadModule: "evdev"
(II) Sleep Button: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) Logitech USB-PS/2 Optical Mouse: Close
(II) UnloadModule: "evdev"
 ddxSigGiveUp: Closing log


_________________
This APT has Super Cow Powers
=======================
Asus G1s: t7500 + 2g ddr667 + 8600mgt with 256ddr3 + 500g sata
Asus G51JX-A1: i7 720 + 8G DDR3 + GTS360 + 500G
MacBook Pro 13"
=======================


页首
 用户资料  
 
4 楼 
 文章标题 : Re: 能不能分开设置显示器的DPI?
帖子发表于 : 2009-11-02 8:37 

注册: 2008-10-28 20:18
帖子: 3249
送出感谢: 0 次
接收感谢: 0 次
尝试一下把2个显示器的纵向分辨率设成一样的看看


页首
 用户资料  
 
5 楼 
 文章标题 : Re: 能不能分开设置显示器的DPI?
帖子发表于 : 2009-11-05 21:04 
头像

注册: 2006-06-14 6:12
帖子: 266
送出感谢: 0 次
接收感谢: 0 次
无解么?
:em20


_________________
This APT has Super Cow Powers
=======================
Asus G1s: t7500 + 2g ddr667 + 8600mgt with 256ddr3 + 500g sata
Asus G51JX-A1: i7 720 + 8G DDR3 + GTS360 + 500G
MacBook Pro 13"
=======================


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 5 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:Bing [Bot] 和 3 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译