当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 4 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : [还是老问题]我的清华紫光AV-625G摄像头安装不了
帖子发表于 : 2010-03-26 8:29 

注册: 2010-03-22 12:46
帖子: 98
送出感谢: 0 次
接收感谢: 0 次
google了N多文章,还是解决不了。插入以后lsusb只是显示使用一个设备,没有任何型号,装了茄子也不能识别。我的Ubuntu9.04和9.1都不能用。 :em20


页首
 用户资料  
 
2 楼 
 文章标题 : Re: [还是老问题]我的清华紫光AV-625G摄像头安装不了
帖子发表于 : 2010-03-26 8:32 

注册: 2010-03-22 12:46
帖子: 98
送出感谢: 0 次
接收感谢: 0 次
Bus 001 Device 005: ID 1b17:6111
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 04b3:310c IBM Corp. Wheel Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
lsusb命令是这样的结果。


页首
 用户资料  
 
3 楼 
 文章标题 : Re: [还是老问题]我的清华紫光AV-625G摄像头安装不了
帖子发表于 : 2010-03-26 8:35 

注册: 2010-03-22 12:46
帖子: 98
送出感谢: 0 次
接收感谢: 0 次
dmesg结果这样:
[ 0.004222] Initializing cgroup subsys memory
[ 0.004234] Initializing cgroup subsys freezer
[ 0.004238] Initializing cgroup subsys net_cls
[ 0.004260] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.004264] CPU: L2 cache: 1024K
[ 0.004267] CPU: Hyper-Threading is disabled
[ 0.004272] mce: CPU supports 4 MCE banks
[ 0.004287] CPU0: Thermal monitoring enabled (TM1)
[ 0.004293] using mwait in idle threads.
[ 0.004301] Performance Counters: no PMU driver, software counters only.
[ 0.004309] Checking 'hlt' instruction... OK.
[ 0.021105] SMP alternatives: switching to UP code
[ 0.032021] Freeing SMP alternatives: 20k freed
[ 0.032045] ACPI: Core revision 20090521
[ 0.044616] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.048001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.048001] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.048001] ..... (found apic 0 pin 0) ...
[ 0.088781] ....... works.
[ 0.088784] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 04
[ 0.092001] APIC calibration not consistent with PM-Timer: 96ms instead of 100ms
[ 0.092001] APIC delta adjusted to PM-Timer: 831251 (798048)
[ 0.092001] Brought up 1 CPUs
[ 0.092001] Total of 1 processors activated (5585.85 BogoMIPS).
[ 0.092001] CPU0 attaching NULL sched-domain.
[ 0.092001] Booting paravirtualized kernel on bare hardware
[ 0.092001] regulator: core version 0.5
[ 0.092001] Time: 8:07:11 Date: 03/24/10
[ 0.092001] NET: Registered protocol family 16
[ 0.092001] EISA bus registered
[ 0.092001] ACPI: bus type pci registered
[ 0.092001] PCI: PCI BIOS revision 2.10 entry at 0xfd98d, last bus=3
[ 0.092001] PCI: Using configuration type 1 for base access
[ 0.092001] bio: create slab <bio-0> at 0
[ 0.092001] ACPI: EC: Look up EC in DSDT
[ 0.109934] ACPI: Interpreter enabled
[ 0.109941] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.109974] ACPI: Using IOAPIC for interrupt routing
[ 0.140658] ACPI: No dock devices found.
[ 0.142265] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.142315] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[ 0.142329] pci 0000:00:00.0: reg 10 32bit mmio: [0xec000000-0xefffffff]
[ 0.142413] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
[ 0.142421] pci 0000:00:02.0: reg 14 32bit mmio: [0xe8000000-0xe807ffff]
[ 0.142429] pci 0000:00:02.0: reg 18 io port: [0x1800-0x1807]
[ 0.142491] pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff]
[ 0.142598] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[ 0.142660] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[ 0.142722] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[ 0.142785] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
[ 0.142856] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe8080000-0xe80803ff]
[ 0.142926] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.142932] pci 0000:00:1d.7: PME# disabled
[ 0.143033] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.143041] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 0.143045] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
[ 0.143074] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.143082] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.143090] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.143098] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.143107] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[ 0.143115] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.143175] pci 0000:00:1f.3: reg 20 io port: [0x18a0-0x18bf]
[ 0.143227] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
[ 0.143235] pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
[ 0.143243] pci 0000:00:1f.5: reg 18 32bit mmio: [0xe8080c00-0xe8080dff]
[ 0.143252] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xe8080800-0xe80808ff]
[ 0.143286] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.143291] pci 0000:00:1f.5: PME# disabled
[ 0.143349] pci 0000:03:08.0: reg 10 32bit mmio: [0xe8100000-0xe8100fff]
[ 0.143357] pci 0000:03:08.0: reg 14 io port: [0x2000-0x203f]
[ 0.143400] pci 0000:03:08.0: supports D1 D2
[ 0.143403] pci 0000:03:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.143408] pci 0000:03:08.0: PME# disabled
[ 0.143445] pci 0000:00:1e.0: transparent bridge
[ 0.143450] pci 0000:00:1e.0: bridge io port: [0x2000-0x2fff]
[ 0.143456] pci 0000:00:1e.0: bridge 32bit mmio: [0xe8100000-0xe81fffff]
[ 0.143470] pci_bus 0000:00: on NUMA node 0
[ 0.143475] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.143641] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SLOT._PRT]
[ 0.236189] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.236339] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 0.236488] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.236634] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.236789] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 0.236944] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.237101] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.237257] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.237522] SCSI subsystem initialized
[ 0.237593] libata version 3.00 loaded.
[ 0.237690] usbcore: registered new interface driver usbfs
[ 0.237709] usbcore: registered new interface driver hub
[ 0.237742] usbcore: registered new device driver usb
[ 0.237903] ACPI: WMI: Mapper loaded
[ 0.237906] PCI: Using ACPI for IRQ routing
[ 0.238152] Bluetooth: Core ver 2.15
[ 0.238189] NET: Registered protocol family 31
[ 0.238192] Bluetooth: HCI device and connection manager initialized
[ 0.238196] Bluetooth: HCI socket layer initialized
[ 0.238199] NetLabel: Initializing
[ 0.238201] NetLabel: domain hash size = 128
[ 0.238203] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.238220] NetLabel: unlabeled traffic allowed by default
[ 0.238344] hpet clockevent registered
[ 0.238348] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.238355] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.238362] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.246080] pnp: PnP ACPI init
[ 0.246109] ACPI: bus type pnp registered
[ 0.277817] pnp: PnP ACPI: found 13 devices
[ 0.277821] ACPI: ACPI bus type pnp unregistered
[ 0.277826] PnPBIOS: Disabled by ACPI PNP
[ 0.277844] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.277848] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.277852] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.277856] system 00:01: ioport range 0x1100-0x111f has been reserved
[ 0.277859] system 00:01: ioport range 0x1180-0x11bf has been reserved
[ 0.277863] system 00:01: ioport range 0xe000-0xe00f has been reserved
[ 0.277867] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[ 0.277870] system 00:01: ioport range 0xfe10-0xfe11 has been reserved
[ 0.277876] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.277880] system 00:01: iomem range 0xfed90000-0xfed903ff has been reserved
[ 0.312603] AppArmor: AppArmor Filesystem Enabled
[ 0.312634] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.312639] pci 0000:00:1e.0: IO window: 0x2000-0x2fff
[ 0.312646] pci 0000:00:1e.0: MEM window: 0xe8100000-0xe81fffff
[ 0.312651] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.312666] pci 0000:00:1e.0: setting latency timer to 64
[ 0.312673] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.312677] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.312681] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff]
[ 0.312684] pci_bus 0000:03: resource 1 mem: [0xe8100000-0xe81fffff]
[ 0.312687] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.312691] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[ 0.312741] NET: Registered protocol family 2
[ 0.312871] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.313356] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.314246] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.314879] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.314884] TCP reno registered
[ 0.315072] NET: Registered protocol family 1
[ 0.315184] Trying to unpack rootfs image as initramfs...
[ 0.578458] Freeing initrd memory: 7726k freed
[ 0.588931] Simple Boot Flag at 0x35 set to 0x1
[ 0.589084] cpufreq-nforce2: No nForce2 chipset.
[ 0.589142] Scanning for low memory corruption every 60 seconds
[ 0.589299] audit: initializing netlink socket (disabled)
[ 0.589330] type=2000 audit(1269418031.588:1): initialized
[ 0.599509] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.601210] VFS: Disk quotas dquot_6.5.2
[ 0.601281] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.601972] fuse init (API version 7.12)
[ 0.602080] msgmni has been set to 1481
[ 0.602334] alg: No test for stdrng (krng)
[ 0.602353] io scheduler noop registered
[ 0.602356] io scheduler anticipatory registered
[ 0.602359] io scheduler deadline registered
[ 0.602416] io scheduler cfq registered (default)
[ 0.602435] pci 0000:00:02.0: Boot video device
[ 0.602633] pci 0000:03:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.602732] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.602771] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.602924] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.602929] ACPI: Power Button [PWRF]
[ 0.603002] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input1
[ 0.603006] ACPI: Power Button [PWRB]
[ 0.603242] processor LNXCPU:00: registered as cooling_device0
[ 0.603247] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.623164] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.623176] ACPI: Thermal Zone [THM0] (78 C)
[ 0.623235] isapnp: Scanning for PnP cards...
[ 0.740017] Switched to high resolution mode on CPU 0
[ 0.977278] isapnp: No Plug & Play device found
[ 0.978785] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.978902] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.979392] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.980632] brd: module loaded
[ 0.981189] loop: module loaded
[ 0.981287] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.981417] ata_piix 0000:00:1f.1: version 2.13
[ 0.981432] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 0.981443] alloc irq_desc for 18 on node -1
[ 0.981446] alloc kstat_irqs on node -1
[ 0.981456] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.981511] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.981616] scsi0 : ata_piix
[ 0.981731] scsi1 : ata_piix
[ 0.983042] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 0.983047] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 0.984366] Fixed MDIO Bus: probed
[ 0.984415] PPP generic driver version 2.4.2
[ 0.984541] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.984566] alloc irq_desc for 23 on node -1
[ 0.984569] alloc kstat_irqs on node -1
[ 0.984577] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.984598] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.984603] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.984640] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.988545] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.988553] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 0.988570] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe8080000
[ 1.004014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.004122] usb usb1: configuration #1 chosen from 1 choice
[ 1.004162] hub 1-0:1.0: USB hub found
[ 1.004173] hub 1-0:1.0: 8 ports detected
[ 1.004248] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.004266] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.004305] alloc irq_desc for 16 on node -1
[ 1.004308] alloc kstat_irqs on node -1
[ 1.004314] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.004322] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.004326] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.004371] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.004402] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
[ 1.004507] usb usb2: configuration #1 chosen from 1 choice
[ 1.004544] hub 2-0:1.0: USB hub found
[ 1.004554] hub 2-0:1.0: 2 ports detected
[ 1.004612] alloc irq_desc for 19 on node -1
[ 1.004615] alloc kstat_irqs on node -1
[ 1.004620] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.004627] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.004631] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.004666] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.004697] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 1.004794] usb usb3: configuration #1 chosen from 1 choice
[ 1.004829] hub 3-0:1.0: USB hub found
[ 1.004839] hub 3-0:1.0: 2 ports detected
[ 1.004889] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.004897] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.004901] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.004943] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.004973] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.005069] usb usb4: configuration #1 chosen from 1 choice
[ 1.005103] hub 4-0:1.0: USB hub found
[ 1.005113] hub 4-0:1.0: 2 ports detected
[ 1.005162] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.005170] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.005174] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.005207] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.005230] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 1.005331] usb usb5: configuration #1 chosen from 1 choice
[ 1.005369] hub 5-0:1.0: USB hub found
[ 1.005379] hub 5-0:1.0: 2 ports detected
[ 1.005489] PNP: PS/2 Controller [PNP0303:KBC] at 0x60,0x64 irq 1
[ 1.005492] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.005982] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.006063] mice: PS/2 mouse device common for all mice
[ 1.006176] rtc_cmos 00:04: RTC can wake from S4
[ 1.006221] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.006247] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.006391] device-mapper: uevent: version 1.0.3
[ 1.006509] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.006606] device-mapper: multipath: version 1.1.0 loaded
[ 1.006610] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.006761] EISA: Probing bus 0 at eisa.0
[ 1.006769] Cannot allocate resource for EISA slot 1
[ 1.006772] Cannot allocate resource for EISA slot 2
[ 1.006798] EISA: Detected 0 cards.
[ 1.006851] cpuidle: using governor ladder
[ 1.006854] cpuidle: using governor menu
[ 1.007500] TCP cubic registered
[ 1.007658] NET: Registered protocol family 10
[ 1.008262] lo: Disabled Privacy Extensions
[ 1.008693] NET: Registered protocol family 17
[ 1.008720] Bluetooth: L2CAP ver 2.13
[ 1.008723] Bluetooth: L2CAP socket layer initialized
[ 1.008727] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.008729] Bluetooth: SCO socket layer initialized
[ 1.008767] Bluetooth: RFCOMM TTY layer initialized
[ 1.008771] Bluetooth: RFCOMM socket layer initialized
[ 1.008774] Bluetooth: RFCOMM ver 1.11
[ 1.008812] Using IPI No-Shortcut mode
[ 1.008898] PM: Resume from disk failed.
[ 1.008920] registered taskstats version 1
[ 1.009024] Magic number: 2:695:119
[ 1.009105] rtc_cmos 00:04: setting system clock to 2010-03-24 08:07:12 UTC (1269418032)
[ 1.009109] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.009111] EDD information not available.
[ 1.029579] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.148590] ata2.00: ATAPI: SAMSUNG CD-ROM SC-148A, B403, max UDMA/33
[ 1.148913] ata1.00: ATA-6: WDC WD800BB-08JHC0, 06.01C06, max UDMA/100
[ 1.148917] ata1.00: 156312576 sectors, multi 16: LBA
[ 1.164378] ata2.00: configured for UDMA/33
[ 1.164630] ata1.00: configured for UDMA/100
[ 1.164785] scsi 0:0:0:0: Direct-Access ATA WDC WD800BB-08JH 06.0 PQ: 0 ANSI: 5
[ 1.164936] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.164987] sd 0:0:0:0: [sda] 156312576 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.165055] sd 0:0:0:0: [sda] Write Protect is off
[ 1.165059] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.165093] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.165270] sda:
[ 1.165789] scsi 1:0:0:0: CD-ROM SAMSUNG CD-ROM SC-148A B403 PQ: 0 ANSI: 5
[ 1.167535] sr0: scsi3-mmc drive: 8x/48x cd/rw xa/form2 cdda tray
[ 1.167540] Uniform CD-ROM driver Revision: 3.20
[ 1.167636] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.167690] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.182368] sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 1.254715] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.254736] Freeing unused kernel memory: 540k freed
[ 1.255360] Write protecting the kernel text: 4580k
[ 1.255393] Write protecting the kernel read-only data: 1840k
[ 1.497628] Linux agpgart interface v0.103
[ 1.501812] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[ 1.502102] agpgart-intel 0000:00:00.0: detected 8060K stolen memory
[ 1.509384] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.509388] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.509443] alloc irq_desc for 20 on node -1
[ 1.509446] alloc kstat_irqs on node -1
[ 1.509456] e100 0000:03:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.532856] e100 0000:03:08.0: PME# disabled
[ 1.542951] Floppy drive(s): fd0 is 1.44M
[ 1.587453] FDC 0 is a National Semiconductor PC87306
[ 1.605520] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[ 1.628823] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 1.668974] e100: eth0: e100_probe: addr 0xe8100000, irq 20, MAC addr 00:0d:60:c3:55:6f
[ 1.669711] [drm] Initialized drm 1.1.0 20060810
[ 1.687171] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.687180] i915 0000:00:02.0: setting latency timer to 64
[ 1.836763] [drm] fb0: inteldrmfb frame buffer device
[ 1.836776] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.925206] render error detected, EIR: 0x00000010
[ 1.925212] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking
[ 1.925220] render error detected, EIR: 0x00000010
[ 1.934228] [drm] DAC-5: set mode 1024x768 13
[ 1.954961] Console: switching to colour frame buffer device 128x48
[ 1.967745] usb 3-2: configuration #1 chosen from 1 choice
[ 1.978886] usbcore: registered new interface driver hiddev
[ 1.991940] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4
[ 1.992116] generic-usb 0003:04B3:310C.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-2/input0
[ 1.992142] usbcore: registered new interface driver usbhid
[ 1.992146] usbhid: v2.6:USB HID core driver
[ 2.208016] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 2.367220] usb 5-1: configuration #1 chosen from 1 choice
[ 3.080111] PM: Starting manual resume from disk
[ 3.080117] PM: Resume from partition 8:8
[ 3.080120] PM: Checking hibernation image.
[ 3.080315] PM: Resume from disk failed.
[ 3.321485] EXT4-fs (loop0): barriers enabled
[ 3.346989] kjournald2 starting: pid 368, dev loop0:8, commit interval 5 seconds
[ 3.347052] EXT4-fs (loop0): delayed allocation enabled
[ 3.347057] EXT4-fs: file extents enabled
[ 3.348301] EXT4-fs: mballoc enabled
[ 3.348332] EXT4-fs (loop0): mounted filesystem with ordered data mode
[ 4.256476] type=1505 audit(1269418035.746:2): operation="profile_load" pid=393 name=/usr/share/gdm/guest-session/Xsession
[ 4.259817] type=1505 audit(1269418035.746:3): operation="profile_load" pid=394 name=/sbin/dhclient3
[ 4.260646] type=1505 audit(1269418035.750:4): operation="profile_load" pid=394 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 4.261076] type=1505 audit(1269418035.750:5): operation="profile_load" pid=394 name=/usr/lib/connman/scripts/dhclient-script
[ 4.316502] type=1505 audit(1269418035.806:6): operation="profile_load" pid=395 name=/usr/bin/evince
[ 4.330172] type=1505 audit(1269418035.818:7): operation="profile_load" pid=395 name=/usr/bin/evince-previewer
[ 4.337943] type=1505 audit(1269418035.826:8): operation="profile_load" pid=395 name=/usr/bin/evince-thumbnailer
[ 4.357427] type=1505 audit(1269418035.846:9): operation="profile_load" pid=397 name=/usr/lib/cups/backend/cups-pdf
[ 4.358349] type=1505 audit(1269418035.846:10): operation="profile_load" pid=397 name=/usr/sbin/cupsd
[ 13.987579] udev: starting version 147
[ 14.960365] lp: driver loaded but no devices found
[ 14.984487] parport_pc 00:0c: reported by Plug and Play ACPI
[ 14.984564] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 15.030072] ppdev: user-space parallel port driver
[ 15.080266] lp0: using parport0 (interrupt-driven).
[ 15.159349] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.197707] intel_rng: Firmware space is locked read-only. If you can't or
[ 15.197710] intel_rng: don't want to disable this in firmware setup, and if
[ 15.197712] intel_rng: you are certain that your system has a functional
[ 15.197713] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 15.204272] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.260993] cdc_acm 5-1:1.0: ttyACM0: USB ACM device
[ 15.263396] usbcore: registered new interface driver cdc_acm
[ 15.263401] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 16.375844] alloc irq_desc for 17 on node -1
[ 16.375850] alloc kstat_irqs on node -1
[ 16.375860] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 16.375905] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 16.800016] intel8x0_measure_ac97_clock: measured 53285 usecs (2567 samples)
[ 16.800020] intel8x0: clocking to 48000
[ 19.973147] Adding 262136k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262136k
[ 20.042548] EXT4-fs (loop0): internal journal on loop0:8
[ 20.622224] __ratelimit: 3 callbacks suppressed
[ 20.622230] type=1505 audit(1269389252.110:12): operation="profile_replace" pid=895 name=/usr/share/gdm/guest-session/Xsession
[ 20.630951] type=1505 audit(1269389252.118:13): operation="profile_replace" pid=896 name=/sbin/dhclient3
[ 20.631746] type=1505 audit(1269389252.118:14): operation="profile_replace" pid=896 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 20.632215] type=1505 audit(1269389252.122:15): operation="profile_replace" pid=896 name=/usr/lib/connman/scripts/dhclient-script
[ 20.639860] type=1505 audit(1269389252.126:16): operation="profile_replace" pid=897 name=/usr/bin/evince
[ 20.675614] type=1505 audit(1269389252.162:17): operation="profile_replace" pid=897 name=/usr/bin/evince-previewer
[ 20.692595] type=1505 audit(1269389252.182:18): operation="profile_replace" pid=897 name=/usr/bin/evince-thumbnailer
[ 20.697802] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.739314] type=1505 audit(1269389252.226:19): operation="profile_replace" pid=904 name=/usr/lib/cups/backend/cups-pdf
[ 20.740295] type=1505 audit(1269389252.230:20): operation="profile_replace" pid=904 name=/usr/sbin/cupsd
[ 20.749746] type=1505 audit(1269389252.238:21): operation="profile_replace" pid=905 name=/usr/sbin/tcpdump
[ 22.816148] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[ 22.820401] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 30.062088] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 30.062096] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 30.062102] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 30.062112] end_request: I/O error, dev sr0, sector 1416960
[ 30.062121] Buffer I/O error on device sr0, logical block 177120
[ 33.608009] eth0: no IPv6 routers present
[ 38.059225] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 38.059233] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 38.059239] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 38.059249] end_request: I/O error, dev sr0, sector 1416960
[ 38.059258] Buffer I/O error on device sr0, logical block 177120
[ 46.056357] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 46.056365] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 46.056372] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 46.056380] end_request: I/O error, dev sr0, sector 1416960
[ 46.056388] Buffer I/O error on device sr0, logical block 177120
[ 56.092070] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 56.092079] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 56.092085] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 56.092094] end_request: I/O error, dev sr0, sector 1416960
[ 56.092102] Buffer I/O error on device sr0, logical block 177120
[ 64.084492] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 64.084500] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 64.084506] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 64.084515] end_request: I/O error, dev sr0, sector 1416960
[ 64.084524] Buffer I/O error on device sr0, logical block 177120
[ 72.081524] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 72.081532] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 72.081538] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 72.081547] end_request: I/O error, dev sr0, sector 1416960
[ 72.081556] Buffer I/O error on device sr0, logical block 177120
[ 74.968075] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 74.977921] ISOFS: changing to secondary root
[ 956.207792] compiz.real[1612]: segfault at 41200000 ip 08055c3c sp bfe57b40 error 4 in compiz.real[8048000+34000]
[ 1746.584055] usb 5-1: USB disconnect, address 2
[ 1807.424016] usb 5-1: new full speed USB device using uhci_hcd and address 3
[ 1807.588115] usb 5-1: configuration #1 chosen from 1 choice
[ 1807.591078] cdc_acm 5-1:1.0: ttyACM0: USB ACM device
[ 8159.368116] usb 5-1: USB disconnect, address 3
[ 9128.417572] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 9128.417580] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 9128.417586] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 9128.417595] end_request: I/O error, dev sr0, sector 1285332
[ 9128.417604] Buffer I/O error on device sr0, logical block 321333
[ 9128.417611] Buffer I/O error on device sr0, logical block 321334
[ 9128.417615] Buffer I/O error on device sr0, logical block 321335
[ 9128.417618] Buffer I/O error on device sr0, logical block 321336
[ 9128.417622] Buffer I/O error on device sr0, logical block 321337
[ 9128.417626] Buffer I/O error on device sr0, logical block 321338
[ 9128.417630] Buffer I/O error on device sr0, logical block 321339
[ 9128.417634] Buffer I/O error on device sr0, logical block 321340
[ 9128.417638] Buffer I/O error on device sr0, logical block 321341
[ 9433.806527] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 9433.806535] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
[ 9433.806541] sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
[ 9433.806551] end_request: I/O error, dev sr0, sector 1339096
[ 9433.806559] __ratelimit: 39 callbacks suppressed
[ 9433.806564] Buffer I/O error on device sr0, logical block 334774
[ 9433.806569] Buffer I/O error on device sr0, logical block 334775
[ 9433.806574] Buffer I/O error on device sr0, logical block 334776
[ 9433.806578] Buffer I/O error on device sr0, logical block 334777
[ 9433.806581] Buffer I/O error on device sr0, logical block 334778
[ 9433.806585] Buffer I/O error on device sr0, logical block 334779
[ 9433.806589] Buffer I/O error on device sr0, logical block 334780
[ 9433.806593] Buffer I/O error on device sr0, logical block 334781
[ 9433.806596] Buffer I/O error on device sr0, logical block 334782
[ 9433.806600] Buffer I/O error on device sr0, logical block 334783
[172400.636029] usb 1-7: new high speed USB device using ehci_hcd and address 4
[172400.768934] usb 1-7: configuration #1 chosen from 1 choice
[173525.992073] usb 1-7: USB disconnect, address 4
[173530.912031] usb 1-8: new high speed USB device using ehci_hcd and address 5
[173531.044885] usb 1-8: configuration #1 chosen from 1 choice


页首
 用户资料  
 
4 楼 
 文章标题 : Re: [还是老问题]我的清华紫光AV-625G摄像头安装不了
帖子发表于 : 2010-03-26 16:30 

注册: 2010-03-22 12:46
帖子: 98
送出感谢: 0 次
接收感谢: 0 次
:em06 大侠呢?


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 4 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 2 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译