打印机为何不能打印图片了？

[c_charles]

canon ip1180打印机，使用的是网上流行的ip1800的驱动。系统升级到10.4后，发现不能打印图片：若打印含有图片的内容（doc/odt/pdf），文字部分可打印，一旦打印到图片位置即终止打印。

ldd /usr/local/bin/cifip1800 命令结果如下：

linux-gate.so.1 => (0x00904000)
libcnbpcmcm312.so => /usr/lib/libcnbpcmcm312.so (0x00fac000)
libcnbpess312.so => /usr/lib/libcnbpess312.so (0x00c4a000)
libm.so.6 => /lib/tls/i686/cmov/libm.so.6 (0x00e43000)
libdl.so.2 => /lib/tls/i686/cmov/libdl.so.2 (0x00ba5000)
libtiff.so.3 => /usr/lib/libtiff.so.3 (0x00110000)
libpng.so.3 => /usr/lib/libpng.so.3 (0x00202000)
libcnbpcnclapi312.so => /usr/lib/libcnbpcnclapi312.so (0x002fc000)
libcnbpcnclbjcmd312.so => /usr/lib/libcnbpcnclbjcmd312.so (0x00d4b000)
libcnbpcnclui312.so => /usr/lib/libcnbpcnclui312.so (0x001f2000)
libpopt.so.0 => /lib/libpopt.so.0 (0x00336000)
libc.so.6 => /lib/tls/i686/cmov/libc.so.6 (0x00341000)
libpthread.so.0 => /lib/tls/i686/cmov/libpthread.so.0 (0x009e8000)
/lib/ld-linux.so.2 (0x00982000)
libjpeg.so.62 => /usr/lib/libjpeg.so.62 (0x0016b000)
libz.so.1 => /lib/libz.so.1 (0x0018c000)

其中，libtiff.so.3文件，原驱动要求是libtiff.so.4.2.1软链接的，因10.4版本没有，系统中找到libtiff.so.4.3.2软链接而成；
libpng.so.3文件，原驱动要求是libpng12.so.0.27.0，也因为10.4版本没有，系统中找到/lib/libpng12.so.0.42.0版本而软链接而成。

不知是否和图片打印故障有关？

附安装脚本：
ARCH1=i686
ARCH2=x86_64
if [ "$ARCH1" = `uname -m` ];
then
cd ./files
dpkg -i cnijfilter-common_2.70-2_i386.deb
dpkg -i cnijfilter-ip1800series_2.70-2_i386.deb
ln -s libpng12.so.0.27.0 /usr/lib/libpng.so.3
ln -s libtiff.so.4.2.1 /usr/lib/libtiff.so.3
cp -p /usr/share/cups/model/canonip1800.ppd /usr/share/cups/model/canonip1800.ppd_backup
cp canonip1800.ppd /usr/share/cups/model
/etc/init.d/cups force-reload
elif [ "$ARCH2" = `uname -m` ];
then
apt-get -y install ia32-libs
cd ./files
dpkg -i --force-architecture cnijfilter-common_2.70-2_i386.deb
dpkg -i --force-architecture cnijfilter-ip1800series_2.70-2_i386.deb
ln -s libpng12.so.0.27.0 /usr/lib32/libpng.so.3
ln -s libtiff.so.4.2.1 /usr/lib32/libtiff.so.3
cp -p /usr/share/cups/model/canonip1800.ppd /usr/share/cups/model/canonip1800.ppd_backup
cp canonip1800.ppd /usr/share/cups/model
/etc/init.d/cups force-reload
fi

[c_charles]

目前问题依旧