10.04安装NV GT220 后,不能上1280*1024 ,查阅文章无数,求解~

声卡/显卡/打印机/USB设备等硬件问题(网卡问题请发上面的网卡板块)
回复
zoozkop
帖子: 6
注册时间: 2009-08-11 9:06
送出感谢: 0
接收感谢: 0

10.04安装NV GT220 后,不能上1280*1024 ,查阅文章无数,求解~

#1

帖子 zoozkop » 2010-11-06 23:56

新手,如何修改分辨率?我研究一下,都说用gtf得到参数,然后写到 etc/X11/xorg.conf的显示器(Monitor)配置那段中,研究好久,改成如此文件后,只能上648*480,改为默认的文件后,只能上1024*768?

[root@xgw xgw]# gtf 1280 1024 60 -x

# 1280x1024 @ 60.00 Hz (GTF) hsync: 63.60 kHz; pclk: 108.88 MHz
Modeline "1280x1024_60.00" 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -HSync +Vsync



# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Thu Apr 15 05:52:31 PDT 2010

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "True"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "Module"
Load "glx"
EndSection
907169993
帖子: 93
注册时间: 2009-06-12 10:02
送出感谢: 0
接收感谢: 0

Re: 10.04安装NV GT220 后,不能上1280*1024 ,查阅文章无数,求解~

#2

帖子 907169993 » 2010-11-07 0:13

配置好像有一点问题, 上GOOGLE再找找看!

建议,楼主换个驱动看看,N卡,系统正常会检测到两到三个驱动,

激活别的再试!

我也曾经碰到过烂显示器,刷新率为设为85才不会闪的,曾经也加过配置参数,成功后!

后来升级显卡后,换了一个驱动就有了85的刷新,不凡一试
zoozkop
帖子: 6
注册时间: 2009-08-11 9:06
送出感谢: 0
接收感谢: 0

Re: 10.04安装NV GT220 后,不能上1280*1024 ,查阅文章无数,求解~

#3

帖子 zoozkop » 2010-11-07 10:14

就是说调整xorg.conf的思路是正确的?前些天有人说现在的驱动不用xorg.conf了,不知道是否正确,如果不用xorg.conf文件的话,那用的是又是哪个文件呢?
回复

回到 “常用硬件支持”