当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 2 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : 6.10 tf6100驱动问题
帖子发表于 : 2006-11-12 10:14 

注册: 2006-03-21 19:43
帖子: 12
送出感谢: 0 次
接收感谢: 0 次
我是从dapper升到6.10
卸载了nvidia-glx之后重新apt-get install 一次,发现进不了x

于是从nvidia官方网站下了9629驱动,升级内核到2.6.17-10安装了headers和src
sh安装之后仍然不行......

/etc/X11/xorg.conf
Device
generic video card
nvidia

改成nv也不行......

能看到nv图标,但是就是进不去x
ft了

出错log如下:
代码:
(**) NV(0):  Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) NV(0): Modeline "1152x864"  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync
(**) NV(0):  Default mode "1280x768": 80.1 MHz, 47.7 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x768"   80.14  1280 1344 1480 1680  768 769 772 795
(**) NV(0):  Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) NV(0): Modeline "1152x768"   65.00  1152 1178 1314 1472  768 771 777 806 +hsync +vsync
(**) NV(0):  Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) NV(0): Modeline "1024x768"   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync
(**) NV(0):  Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) NV(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync
(**) NV(0):  Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
(**) NV(0):  Default mode "1024x768": 44.9 MHz, 35.5 kHz, 86.9 Hz (I)
(II) NV(0): Modeline "1024x768"   44.90  1024 1032 1208 1264  768 768 776 817 interlace +hsync +vsync
(**) NV(0):  Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) NV(0): Modeline "832x624"   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync
(**) NV(0):  Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) NV(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync
(**) NV(0):  Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) NV(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
(**) NV(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) NV(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) NV(0):  Default mode "840x525": 73.6 MHz, 65.2 kHz, 60.1 Hz (D)
(II) NV(0): Modeline "840x525"   73.57  840 892 984 1128  525 525 527 543 doublescan
(**) NV(0):  Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "700x525"   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync
(**) NV(0):  Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "640x512"   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync
(**) NV(0):  Default mode "720x450": 54.4 MHz, 56.9 kHz, 60.2 Hz (D)
(II) NV(0): Modeline "720x450"   54.42  720 736 940 956  450 459 463 473 doublescan +hsync +vsync
(**) NV(0):  Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) NV(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(**) NV(0):  Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) NV(0): Modeline "640x480"   31.50  640 664 704 832  480 489 491 520 -hsync -vsync
(**) NV(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) NV(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(**) NV(0):  Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "640x480"   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync
(**) NV(0):  Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) NV(0): Modeline "720x400"   35.50  720 756 828 936  400 401 404 446 -hsync +vsync
(**) NV(0):  Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) NV(0): Modeline "640x400"   31.50  640 672 736 832  400 401 404 445 -hsync +vsync
(**) NV(0):  Default mode "640x400": 41.7 MHz, 49.7 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "640x400"   41.73  640 672 740 840  400 400 402 414 doublescan
(**) NV(0):  Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "576x432"   54.00  576 608 672 800  432 432 434 450 doublescan +hsync +vsync
(**) NV(0):  Default mode "640x384": 40.1 MHz, 47.7 kHz, 60.1 Hz (D)
(II) NV(0): Modeline "640x384"   40.07  640 672 740 840  384 384 386 397 doublescan
(**) NV(0):  Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) NV(0): Modeline "640x350"   31.50  640 672 736 832  350 382 385 445 +hsync -vsync
(**) NV(0):  Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) NV(0): Modeline "576x384"   32.50  576 589 657 736  384 385 388 403 doublescan +hsync +vsync
(**) NV(0):  Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(II) NV(0): Modeline "512x384"   47.25  512 536 584 688  384 384 386 404 doublescan +hsync +vsync
(**) NV(0):  Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) NV(0): Modeline "512x384"   39.40  512 520 568 656  384 384 386 400 doublescan +hsync +vsync
(**) NV(0):  Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) NV(0): Modeline "512x384"   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync
(**) NV(0):  Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "512x384"   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync
(**) NV(0):  Default mode "512x384": 22.4 MHz, 35.5 kHz, 86.6 Hz (D)
(II) NV(0): Modeline "512x384"   22.45  512 516 604 632  384 384 388 409 interlace doublescan +hsync +vsync
(**) NV(0):  Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) NV(0): Modeline "416x312"   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync
(**) NV(0):  Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) NV(0): Modeline "400x300"   28.15  400 416 448 524  300 300 302 315 doublescan +hsync +vsync
(**) NV(0):  Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) NV(0): Modeline "400x300"   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync
(**) NV(0):  Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) NV(0): Modeline "400x300"   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync
(**) NV(0):  Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) NV(0): Modeline "400x300"   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync
(**) NV(0):  Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) NV(0): Modeline "400x300"   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync
(**) NV(0):  Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) NV(0): Modeline "320x240"   18.00  320 348 376 416  240 240 242 254 doublescan -hsync -vsync
(**) NV(0):  Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) NV(0): Modeline "320x240"   15.75  320 328 360 420  240 240 242 250 doublescan -hsync -vsync
(**) NV(0):  Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) NV(0): Modeline "320x240"   15.75  320 332 352 416  240 244 245 260 doublescan -hsync -vsync
(**) NV(0):  Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) NV(0): Modeline "320x240"   12.60  320 328 376 400  240 245 246 262 doublescan -hsync -vsync
(**) NV(0):  Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) NV(0): Modeline "360x200"   17.75  360 378 414 468  200 200 202 223 doublescan -hsync +vsync
(**) NV(0):  Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NV(0): Modeline "320x200"   15.75  320 336 368 416  200 200 202 222 doublescan -hsync +vsync
(**) NV(0):  Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NV(0): Modeline "320x175"   15.75  320 336 368 416  175 191 192 222 doublescan +hsync -vsync
(==) NV(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
        compiled for 7.1.1, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
        compiled for 7.1.1, module version = 1.2.0
        ABI class: X.Org Video Driver, version 1.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
        compiled for 7.1.1, module version = 0.1.0
        ABI class: X.Org Video Driver, version 1.0
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
        [0] 0   0       0xfc000000 - 0xfcffffff (0x1000000) MX[B]
        [1] 0   0       0xd0000000 - 0xdfffffff (0x10000000) MX[B]
        [2] 0   0       0xfb000000 - 0xfbffffff (0x1000000) MX[B]
        [3] -1  0       0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [4] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [5] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [6] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [7] -1  0       0xfe02b000 - 0xfe02bfff (0x1000) MX[B]
        [8] -1  0       0xfe02c000 - 0xfe02cfff (0x1000) MX[B]
        [9] -1  0       0xfe02d000 - 0xfe02dfff (0x1000) MX[B]
        [10] -1 0       0xfe02e000 - 0xfe02e0ff (0x100) MX[B]
        [11] -1 0       0xfe02f000 - 0xfe02ffff (0x1000) MX[B]
        [12] -1 0       0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
        [13] -1 0       0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
        [14] -1 0       0xfb000000 - 0xfbffffff (0x1000000) MX[B](B)
        [15] 0  0       0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
        [16] 0  0       0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
        [17] 0  0       0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
        [18] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [19] -1 0       0x00000000 - 0x000000ff (0x100) IX[B]
        [20] -1 0       0x0000d400 - 0x0000d407 (0x8) IX[B]
        [21] -1 0       0x0000d800 - 0x0000d8ff (0x100) IX[B]
        [22] -1 0       0x0000dc00 - 0x0000dcff (0x100) IX[B]
        [23] -1 0       0x0000e000 - 0x0000e00f (0x10) IX[B]
        [24] -1 0       0x00000b70 - 0x00000b73 (0x4) IX[B]
        [25] -1 0       0x00000970 - 0x00000977 (0x8) IX[B]
        [26] -1 0       0x00000bf0 - 0x00000bf3 (0x4) IX[B]
        [27] -1 0       0x000009f0 - 0x000009f7 (0x8) IX[B]
        [28] -1 0       0x0000f400 - 0x0000f40f (0x10) IX[B]
        [29] -1 0       0x00001c40 - 0x00001c7f (0x40) IX[B]
        [30] -1 0       0x00001c00 - 0x00001c3f (0x40) IX[B]
        [31] 0  0       0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
        [32] 0  0       0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) NV(0): Write-combining range (0xd0000000,0x4000000)
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 mono pattern filled rectangles
        Indirect CPU to Screen color expansion
        Solid Lines
        Scanline Image Writes
        Offscreen Pixmaps
        Setting up tile and stipple cache:
                32 128x128 slots
                32 256x256 slots
                16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(**) Option "dpms"
(**) NV(0): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc104"
(**) Generic Keyboard: XkbModel: "pc104"
(**) Option "XkbLayout" "us"
(**) Generic Keyboard: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/wacom
(**) stylus is in absolute mode
(**) stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) stylus: serial speed 9600
(**) Option "SendCoreEvents"
(**) cursor: always reports core events
(**) cursor device is /dev/wacom
(**) cursor is in relative mode
(**) cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) cursor: serial speed 9600
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/wacom
(**) eraser is in absolute mode
(**) eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) eraser: serial speed 9600
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
    xkb_keycodes             { include "xfree86+aliases(qwerty)" };
    xkb_types                { include "complete" };
    xkb_compatibility        { include "complete" };
    xkb_symbols              { include "pc(pc104)+us" };
    xkb_geometry             { include "pc(pc104)" };
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
        No such file or directory.
Error opening /dev/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/wacom
        No such file or directory.
Error opening /dev/wacom : Success
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
        No such file or directory.
Error opening /dev/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/wacom
        No such file or directory.
Error opening /dev/wacom : Success
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
        No such file or directory.
Error opening /dev/wacom : Success
(EE) xf86OpenSerial: Cannot open device /dev/wacom
        No such file or directory.
Error opening /dev/wacom : Success
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/X11/TTF/, removing from list!
Could not init font path element /usr/share/fonts/X11/OTF, removing from list!
Could not init font path element /usr/share/fonts/X11/CID/, removing from list!



头大,网上也没搜到相应的资料
请教达人指点


页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2006-11-13 8:56 

注册: 2006-03-21 19:43
帖子: 12
送出感谢: 0 次
接收感谢: 0 次
发现是wacom的问题,把相关注掉就可以

但是新的问题出现:

代码:
can't init path element /usr/share/fonts/X11/TTF


MS 升级引起的字体问题,这个怎么解决?


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 2 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 2 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译