[问题]求nVidia Geforce Go6100显卡驱动

声卡/显卡/打印机/USB设备等硬件问题(网卡问题请发上面的网卡板块)
回复
pazll
帖子: 2
注册时间: 2007-01-28 17:06
送出感谢: 0
接收感谢: 0

[问题]求nVidia Geforce Go6100显卡驱动

#1

帖子 pazll » 2007-01-28 22:51

用apt-get install nvidia-glx nvidia-kernel-common
或apt-get install nvidia-glx-legacy nvidia-kernel-common
nvidia-xconfig
都试了,现在反倒进不了x系统了。

提示:
fatal IO error 104(Connection reset by peer) on X server ":0.0"

由于之前搞了2次sudo nvidia-xconfig,所以把之前可以进x系统的xorg.conf文件都给覆盖了。

现在只能停留在字符界面了。

哪位朋友,有原先默认的xorg.conf文件的备份,贴一个上来啊!先谢了。

go6100的驱动是不是没有啊?找遍了都不行!!!
头像
wsk170
帖子: 123
注册时间: 2006-10-14 11:34
送出感谢: 0
接收感谢: 1 次

#2

帖子 wsk170 » 2007-01-28 23:30

我的显卡也是GF6100
去官方网站下载就行了(要9631的,反正9746的我用的有问题) 就十几M
自己论坛里找找 安装显卡驱动的方法 很详细的
pazll
帖子: 2
注册时间: 2007-01-28 17:06
送出感谢: 0
接收感谢: 0

#3

帖子 pazll » 2007-01-29 18:59

我现在进不了x系统,该如何先修复进入到x系统啊。
LifeRuin
帖子: 8
注册时间: 2007-01-26 13:01
送出感谢: 0
接收感谢: 0

#4

帖子 LifeRuin » 2007-01-29 19:16

我也遇到显卡的问题,我的事GeForce2的。
论坛上的方法,两种都用了,不知道是人品还是什么,就是不对,到现在刷新率还是60hz,要死人了。
LifeRuin
帖子: 8
注册时间: 2007-01-26 13:01
送出感谢: 0
接收感谢: 0

#5

帖子 LifeRuin » 2007-01-29 19:19

补充楼主,你用了
sudo nvidia-xconfig的话

可以对xorg手工修改下
把 Driver "nvidia" 改称 "nv"

找到 Load glx注释掉

同时后面加上Load GLcore
Load dri
应该可以吧。。。
gamexg
帖子: 72
注册时间: 2007-01-27 14:06
送出感谢: 0
接收感谢: 0

#6

帖子 gamexg » 2007-01-29 19:20

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "NVIDIA Corporation NV34 [GeForce FX 5200]"
Driver "nv"
BusID "PCI:1:0:0"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-40
VertRefresh 43-60
EndSection

Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV34 [GeForce FX 5200]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "800x600" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection
回复

回到 “常用硬件支持”