分辨率不能调到800*600,星际不能最大话。

声卡/显卡/打印机/USB设备等硬件问题(网卡问题请发上面的网卡板块)
回复
stonecracker
帖子: 14
注册时间: 2005-04-04 20:02
送出感谢: 0
接收感谢: 0

分辨率不能调到800*600,星际不能最大话。

#1

帖子 stonecracker » 2005-10-15 21:26

我知道如果使用800*600的分辨率运行cedega starcraft 的话可以解决不能最大话屏幕的问题。

但是我的Breezy总是不能把分辨率调到800*600。我用的是本本,i810芯片。

那位可以提供解决办法?

------------------------------------------------------------
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/CID"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# paths to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
Load "GLcore"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "v4l"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection

Section "Device"
Identifier "Intel Corporation 82852/855GM Integrated Graphics Device"
Driver "i810"
BusID "PCI:0:2:0"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-40
VertRefresh 43-60
# 800x600 @ 60.00 Hz (GTF) hsync: 37.32 kHz; pclk: 38.22 MHz
Modeline "800x600_60.00" 38.22 800 832 912 1024 600 601 604 622 -HSync +Vsync

EndSection

Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation 82852/855GM Integrated Graphics Device"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 4
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 8
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 15
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 16
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "800x600"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
EndSection

Section "DRI"
Mode 0666
EndSection
头像
eexpress
帖子: 58428
注册时间: 2005-08-14 21:55
来自: 长沙
送出感谢: 4 次
接收感谢: 256 次

#2

帖子 eexpress » 2005-10-15 21:30

用ctrl加小键盘的+-试试。
● 鸣学
stonecracker
帖子: 14
注册时间: 2005-04-04 20:02
送出感谢: 0
接收感谢: 0

本本没有小键盘,试过ctrl+shift+-,没用。

#3

帖子 stonecracker » 2005-10-17 22:53

有人碰到类似的问题了么?真的很烦人呢!

上次好像是改modeline成功过,这次不行了。
头像
eexpress
帖子: 58428
注册时间: 2005-08-14 21:55
来自: 长沙
送出感谢: 4 次
接收感谢: 256 次

#4

帖子 eexpress » 2005-10-17 22:58

Modes "800x600"
这里还是要加几种。没有那个键盘可以自己到快捷键那里设置。
● 鸣学
stonecracker
帖子: 14
注册时间: 2005-04-04 20:02
送出感谢: 0
接收感谢: 0

后来直接装KDE调的,看样子KDE发展得不错了,用段时间看看。

#5

帖子 stonecracker » 2005-10-18 21:28

RT
回复

回到 “常用硬件支持”