安装时没配置网络,安装完后发现没有eth0,请问如何配置???急呀
-
- 帖子: 16
- 注册时间: 2006-12-06 22:33
安装时没配置网络,安装完后发现没有eth0,请问如何配置???急呀
以前安装过6.10,发现安装进度在92%时非常慢,要等几个小时,后来知道原来它要在网上下载一些软件。因此,这次重装时,没有配置网络,可是后来找不到eth0。以前装时,如果开始配置了都可以的,大家帮帮忙,如何激活网卡,网卡类型:Realtek RTL8139/810x Family Fast Ethernet NIC
-
- 帖子: 21
- 注册时间: 2006-03-26 9:59
-
- 帖子: 3
- 注册时间: 2005-10-06 1:45
好吧,这些是newbie问题,没人回答,我来回答吧,不过,你还是看看文档先,我的建议
关于网卡的配置文件,位置在/etc/network/interfaces里,你可以man 8 interfaces查看详细的帮助。给出一个样例:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
allow-hotplug eth0
iface eth0 inet static
address 192.168.1.7
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 61.233.9.9
dns-nameservers 211.98.2.4
#####################################
当然,我假设你正确安装了网卡驱动,如果还有问题,站内message me
关于网卡的配置文件,位置在/etc/network/interfaces里,你可以man 8 interfaces查看详细的帮助。给出一个样例:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
allow-hotplug eth0
iface eth0 inet static
address 192.168.1.7
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 61.233.9.9
dns-nameservers 211.98.2.4
#####################################
当然,我假设你正确安装了网卡驱动,如果还有问题,站内message me