菜鸟第二问:进不了X WINDOWS, help!

声卡/显卡/打印机/USB设备等硬件问题(网卡问题请发上面的网卡板块)
回复
forest_yea
帖子: 10
注册时间: 2005-10-24 18:48
送出感谢: 0
接收感谢: 0

菜鸟第二问:进不了X WINDOWS, help!

#1

帖子 forest_yea » 2005-10-25 0:51

今天一个下午到晚上都兴奋的按照网站的新手指引升级,安装,是一路小跑,兴奋啊。最后来个重新启动,结果关机了!这还没有什么,结果不让进X WINDOWS,startx也没用,闪一下就没,英文说是显示器设置之类的问题,请高手赐教,感谢啊。
头像
firehare
论坛版主
帖子: 2625
注册时间: 2005-04-10 16:54
来自: 温州大学
送出感谢: 0
接收感谢: 2 次
联系:

#2

帖子 firehare » 2005-10-25 9:21

帖出你的/etc/X11/xorg.conf文件,另将你的显卡型号告之!
我心无畏,源自于我心无知。
图片
forest_yea
帖子: 10
注册时间: 2005-10-24 18:48
送出感谢: 0
接收感谢: 0

#3

帖子 forest_yea » 2005-10-25 10:10

机器是奔三那个年代的了,
显卡是主板集成的,UBUNTU已经正确认出,S3 ProSavage PM133
还有主板芯片组是VIA, 是不是也要象WINDOWS下那样装个VIA的主板驱动啊?
具体XORG.CONF文件如下:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/CID"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# paths to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
Load "GLcore"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection

Section "Device"
Identifier "S3 Inc. ProSavage PM133"
Driver "savage"
BusID "PCI:1:0:0"
EndSection

Section "Monitor"
Identifier "S/M 753DF"
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "S3 Inc. ProSavage PM133"
Monitor "S/M 753DF"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection

Section "DRI"
Mode 0666
EndSection

请告知如何修改,如何保存修改,本人非常菜,只因憎恶 比尔盖茨 一句“我受够了中国人”而决定以行动表示其实咱们中国人才有权利说 “我受够了微软的垃圾”!请大家一定支持我和WINDOWS说BYEBYE。
雅雅
帖子: 310
注册时间: 2005-05-12 10:08
送出感谢: 0
接收感谢: 0

#4

帖子 雅雅 » 2005-10-25 11:31

是升级吗??? 升级看来问题就大了。 :oops:
forest_yea
帖子: 10
注册时间: 2005-10-24 18:48
送出感谢: 0
接收感谢: 0

#5

帖子 forest_yea » 2005-10-25 17:49

用光盘安装5.10。

系统设的分辨率是1024x768,16位色,刷新率85hz, 这些和windows下是一样的。显示器是三星17寸的753DF,是支持此设置的。
Bavon
帖子: 61
注册时间: 2005-06-11 11:29
送出感谢: 0
接收感谢: 0
联系:

#6

帖子 Bavon » 2005-11-12 18:48

回复

回到 “常用硬件支持”