当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 7 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : 我的Intel 915显卡怎么不能配置双显示器·[已经解决]
帖子发表于 : 2007-04-29 22:14 

注册: 2007-01-04 10:27
帖子: 17
送出感谢: 0 次
接收感谢: 0 次
修改后显示配置文件错误,无法启动X,,附上配置文件:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/usr/share/fonts/vista"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "Card0"
Driver "i810"
Screen 0
BusID "PCI:0:2:0"
EndSection

Section "Device"
Identifier "Card1"
Driver "i810"
Screen 1
BusID "PCI:0:2:0"
EndSection

Section "Monitor"
Identifier "Monitor0"
Option "DPMS"
HorizSync 28-60
VertRefresh 43-60
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1200x800"
EndSubSection
SubSection "Display"
Depth 4
Modes "1200x800"
EndSubSection
SubSection "Display"
Depth 8
Modes "1200x800"
EndSubSection
SubSection "Display"
Depth 15
Modes "1200x800"
EndSubSection
SubSection "Display"
Depth 16
Modes "1200x800"
EndSubSection
SubSection "Display"
Depth 24
Modes "1200x800"
EndSubSection
EndSection


Section "Monitor"
Identifier "Monitor1"
Option "DPMS"
EndSection

Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
Option "Xinerama" "on"
Option "Clone" "off"
EndSection





Section "DRI"
Mode 0666
EndSection


最后由 launze 编辑于 2007-04-30 23:29,总共编辑了 1 次

页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2007-04-29 22:19 

注册: 2007-03-29 12:59
帖子: 262
送出感谢: 0 次
接收感谢: 0 次
好像是要装 i810switch
i810switch - Enables/disables video output to CRT/LCD on i810 video hardware


_________________
echo 'qq%vs+&qri&mreb%bs+&qri&uqn%of+FBC%pbhag+B' | tr 'n-za-m&+A-J%' 'a-z/=0-9 ' |sudo sh #<-警告:
强烈鄙视SB版主,一群跟风的SB,一群自以为是的SB
对这个论坛彻底失望了


页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2007-04-29 22:50 

注册: 2007-01-04 10:27
帖子: 17
送出感谢: 0 次
接收感谢: 0 次
Google下,
修改成
Section "Device"
Identifier "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
Driver "i810"
BusID "PCI:0:2:0"
VideoRam 65536
Option "ForceBIOS" "1920x1440=1400x1050"
Option "MonitorLayout" "CRT,LFP"

Option "Clone" "on"
EndSection

就可以了,不过CRT刷新频率才60Hz,另外是clone,不适扩展,
楼上说的i810switch显示PCI id of i810 is not recognized.


页首
 用户资料  
 
4 楼 
 文章标题 :
帖子发表于 : 2007-04-29 23:12 

注册: 2007-01-04 10:27
帖子: 17
送出感谢: 0 次
接收感谢: 0 次
intellinuxgraphics.org找到了解决分辨率的问题:
加参数
Option "CloneRefresh" "85"
但还是没有解决问题,我要的是扩展桌面,而不是clone桌面[code][/code]


页首
 用户资料  
 
5 楼 
 文章标题 :
帖子发表于 : 2007-04-30 0:12 

注册: 2007-01-04 10:27
帖子: 17
送出感谢: 0 次
接收感谢: 0 次
最终解决了,配置文件:
代码:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
   FontPath   "/usr/share/fonts/X11/misc"
   FontPath   "/usr/share/fonts/X11/cyrillic"
   FontPath   "/usr/share/fonts/X11/100dpi/:unscaled"
   FontPath   "/usr/share/fonts/X11/75dpi/:unscaled"
   FontPath   "/usr/share/fonts/X11/Type1"
   FontPath   "/usr/share/fonts/X11/100dpi"
   FontPath   "/usr/share/fonts/X11/75dpi"
   FontPath    "/usr/share/fonts/vista"
   # path to defoma fonts
   FontPath   "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
   Load   "i2c"
   Load   "bitmap"
   Load   "ddc"
   Load   "dri"
   Load   "extmod"
   Load   "freetype"
   Load   "glx"
   Load   "int10"
   Load   "vbe"
EndSection

Section "InputDevice"
   Identifier   "Generic Keyboard"
   Driver      "kbd"
   Option      "CoreKeyboard"
   Option      "XkbRules"   "xorg"
   Option      "XkbModel"   "pc105"
   Option      "XkbLayout"   "us"
EndSection

Section "InputDevice"
   Identifier   "Configured Mouse"
   Driver      "mouse"
   Option      "CorePointer"
   Option      "Device"      "/dev/input/mice"
   Option      "Protocol"      "ImPS/2"
   Option      "ZAxisMapping"      "4 5"
   Option      "Emulate3Buttons"   "true"
EndSection

Section "InputDevice"
   Identifier   "Synaptics Touchpad"
   Driver      "synaptics"
   Option      "SendCoreEvents"   "true"
   Option      "Device"      "/dev/psaux"
   Option      "Protocol"      "auto-dev"
   Option      "HorizScrollDelta"   "0"
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "stylus"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"      "stylus"
   Option      "ForceDevice"   "ISDV4"      # Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "eraser"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"      "eraser"
   Option      "ForceDevice"   "ISDV4"      # Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "cursor"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"      "cursor"
   Option      "ForceDevice"   "ISDV4"      # Tablet PC ONLY
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
 ### Comment all HorizSync and VertSync values to use DDC:
        HorizSync    28-60
        VertRefresh  43-60
EndSection

Section "Monitor"
        Identifier   "Monitor1"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
 ### Comment all HorizSync and VertSync values to use DDC:
        HorizSync    31.5 - 57.0
        VertRefresh  50.0 - 90.0
EndSection

Section "Device"
        Option      "MonitorLayout" "CRT,LFP"
        Identifier  "Card0"
        Driver      "i810"
        VendorName  "Intel Corporation"
        BoardName   "Mobile Integrated Graphics Controller"
        BusID       "PCI:0:2:0"
        Screen      0
EndSection

Section "Device"
        Identifier  "Card1"
        Driver      "i810"
        VendorName  "Intel Corporation"
        BoardName   "Mobile Integrated Graphics Controller"
        BusID       "PCI:0:2:0"
        Screen      1
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
   SubSection "Display"
      Depth      24
      Modes      "1200x800"
   EndSubSection
EndSection

Section "Screen"
        Identifier "Screen1"
        Device     "Card1"
        Monitor    "Monitor1"
           SubSection "Display"
      Depth      24
      Modes      "1024x768"
   EndSubSection
EndSection

Section "ServerFlags"
        Option  "Xinerama" "true"
EndSection

Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        Screen      1  "Screen1" RightOf "Screen0"
   InputDevice   "Generic Keyboard"
   InputDevice   "Configured Mouse"
   InputDevice     "stylus"   "SendCoreEvents"
   InputDevice     "cursor"   "SendCoreEvents"
   InputDevice     "eraser"   "SendCoreEvents"
   InputDevice   "Synaptics Touchpad"
EndSection

Section "DRI"
   Mode   0666
EndSection


页首
 用户资料  
 
6 楼 
 文章标题 :
帖子发表于 : 2007-05-04 17:14 
头像

注册: 2006-09-17 17:31
帖子: 107
送出感谢: 0 次
接收感谢: 0 次
i810switch只是一个开关的作用,gnome下就没有象kde下那样的图形界面的设置分辨率和刷新率的工具吗


页首
 用户资料  
 
7 楼 
 文章标题 :
帖子发表于 : 2007-05-16 21:35 

注册: 2006-11-09 7:53
帖子: 84
送出感谢: 0 次
接收感谢: 0 次
单monitou和多monitor可不可以自动切换?


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 7 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 3 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译