当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 4 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : 设置外接显示器的问题
帖子发表于 : 2007-06-21 16:56 

注册: 2006-11-09 7:53
帖子: 84
送出感谢: 0 次
接收感谢: 0 次
笔记本是宽屏的,因为要外接投影仪,所以想设置一下,可是两台显示器总是不能像windows那样两边都是正常显示,贴一下Xorg的内容,请哪位大虾帮着指正一下,谢谢。
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/usr/share/fonts/wenquanyi/wqy-bitmapfont/"
EndSection

Section "Module"
Load "GLcore"
Load "i2c"
Load "bitmap"
Load "ddc"
#Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection

#Section "InputDevice"
# Driver "wacom"
# Identifier "stylus"
# Option "Device" "/dev/input/wacom"
# Option "Type" "stylus"
# Option "ForceDevice" "ISDV4" # Tablet PC ONLY
#EndSection

#Section "InputDevice"
# Driver "wacom"
# Identifier "eraser"
# Option "Device" "/dev/input/wacom"
# Option "Type" "eraser"
# Option "ForceDevice" "ISDV4" # Tablet PC ONLY
#EndSection

#Section "InputDevice"
# Driver "wacom"
# Identifier "cursor"
# Option "Device" "/dev/input/wacom"
# Option "Type" "cursor"
# Option "ForceDevice" "ISDV4" # Tablet PC ONLY
#EndSection

Section "Device"
Identifier "Intel0"
Driver "i810"
BusID "PCI:0:2:0"
Screen 0
Option "MonitorLayout" "CRT,LFP"
Option "DRI" "true"
EndSection

Section "Device"
Identifier "intel1"
Driver "i810"
BusID "PCI:0:2:0"
Screen 1
Option "MonitorLayout" "CRT,LFP"
EndSection

Section "Monitor"
Identifier "internal"
Option "DPMS"
# HorizSync 28-75
# VertRefresh 43-100
EndSection

Section "Monitor"
Identifier "external"
Option "DPMS"
EndSection

Section "Screen"
Identifier "builtinlcd"
Device "Intel0"
Monitor "internal"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800"
EndSubSection
EndSection

Section "Screen"
Identifier "externallcd"
Device "intel1"
Monitor "external"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Xinerama"
#Screen 0 "builtinlcd" 0 0
#Screen 1 "externallcd" LeftOf "builtinlcd"
Screen 0 "builtinlcd" 0 0
Screen 1 "externallcd"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
#InputDevice "stylus" "SendCoreEvents"
#InputDevice "cursor" "SendCoreEvents"
#InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
Option "Xinerama" "true"
#Option "Clone" "on"
EndSection

Section "DRI"
Mode 0666
EndSection

#Section "Extensions"
# Option "Composite" "Enable"
#EndSection


页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2007-06-21 21:58 
头像

注册: 2005-08-14 21:55
帖子: 58428
地址: 长沙
送出感谢: 4
接收感谢: 272
Section "Device"
Identifier "nVIDIA GeForce FX Go7300"
Driver "nvidia"
BusID "PCI:1:0:0"
Option "TripleBuffer" "true" # beryl

Option "TwinView" "on"
#Option "MetaModes" "1280x800,1024x768"
Option "MetaModes" "1024x768,1280x800" # 外接屏幕分辨率在前面(主界面)。
#Option "SecondMonitorHorizSync" "28-51"
#Option "SecondMonitorVertRefresh" "43-60"
Option "TwinViewOrientation" "Leftof" # 内置屏幕位置
# "LeftOf" "RightOf" "Above" "Below" "Clone"

EndSection


参考。建议使用驱动厂家带的设置界面。
比如nvidia-settings


_________________
● 鸣学


页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2007-06-22 21:50 

注册: 2006-11-09 7:53
帖子: 84
送出感谢: 0 次
接收感谢: 0 次
eexpress 写道:
Section "Device"
Identifier "nVIDIA GeForce FX Go7300"
Driver "nvidia"
BusID "PCI:1:0:0"
Option "TripleBuffer" "true" # beryl

Option "TwinView" "on"
#Option "MetaModes" "1280x800,1024x768"
Option "MetaModes" "1024x768,1280x800" # 外接屏幕分辨率在前面(主界面)。
#Option "SecondMonitorHorizSync" "28-51"
#Option "SecondMonitorVertRefresh" "43-60"
Option "TwinViewOrientation" "Leftof" # 内置屏幕位置
# "LeftOf" "RightOf" "Above" "Below" "Clone"

EndSection


参考。建议使用驱动厂家带的设置界面。
比如nvidia-settings


你那是nvdia的,我这是intel的,intel的就只有一个810,一个intel驱动。


页首
 用户资料  
 
4 楼 
 文章标题 :
帖子发表于 : 2007-06-23 18:18 
头像

注册: 2005-08-14 21:55
帖子: 58428
地址: 长沙
送出感谢: 4
接收感谢: 272
你就测试下这些参数。需要加一个显示器的段定义,可以用系统的帮助,搜索xorg.conf的参数配置。在X的层面上,这些参数应该是通用的。

Option "TwinViewOrientation" "Leftof" # 内置屏幕位置


_________________
● 鸣学


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 4 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 4 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译