安装请参照 Ubuntu installation with AIGLX 部分
You won't be able to use the "radeon" driver for the following cards and derivatives:
X1300 / R515 based cards.
X1600 / R530 based cards.
X1800 / R520 based cards.
X1900 / R580 based cards.
2D acceleration only
Xpress 200M Northbridge integrated GPUs
Accelerated 3D support (r300 series)
All these cards and derivatives have good 3D acceleration support
9500 / R300 based cards.
9600 / rv350 or rv360 based cards.
9700 / R300 based cards.
9800 / R350 or R360 based cards.
X300 / rv370 based cards.
X600 / rv380 based cards.
X700 / rv410 based cards.
X800 / R420 or R423 or R430 or R480 based cards.
X850 / R480 or R481 based cards.
X1050 / rv370 based cards.
Full 3D support (r100 and r200 series)
All these cards and derivatives have full 3D acceleration support
7000 / rv100 based cards.
7200 / R100 based cards.
7500 / rv200 based cards.
8X00 / R200 based cards.
9000 / rv250 based cards.
9100 / R200 based cards.
9200 / rv280 based cards.
VGA compatible controller: Display controller:
05:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)] 05:00.1 Display controller: ATI Technologies Inc RV370 [Radeon X300SE]
安装源里的驱动请参照 Install from Ubuntu repositories (easier) 部分
安装最新驱动请参照 Install from ati.com (latest version of drivers) 部分
注意第二条，此驱动不支持9500以下的显卡#It is a 'Radeon' card
#The model of the card is in the 9xxx series, 9500 or higher, or it is in the X series (e.g. X300), or it has TV-Out capability. The 'fglrx' driver does not support cards earlier than the 9500.
#The command lspci reveals a card with "ATI" in its name
#You need hardware-accelerated 3D support, or display refresh rates higher than 60 Hz. The open source drivers are fine for all other areas.
#Some basic knowledge of a Linux command line
我的是nvidia nforce4的主板+ati x550的显卡