[问题]求救~~关于NVIDIA的8系列显卡支持
-
- 帖子: 19
- 注册时间: 2007-07-22 12:35
[问题]求救~~关于NVIDIA的8系列显卡支持
新买了台机子~是8600显卡的……~~装UBUNTU~只能用文本模式安装~而且装完也进不了图形界面~只能用文字界面……痛苦之极~求救~
-
- 帖子: 309
- 注册时间: 2006-01-04 19:26
-
- 帖子: 19
- 注册时间: 2007-07-22 12:35
有位高人指点我看了张关于装8系列显卡的贴~全是E文~~看懂一半……供大家参考~(看懂一半……所以……不会翻译……会翻译的翻译下……):
The restricted drivers manager has made things a mess for a lot of people with newer and older nVidia cards.The restricted modules are getting load priority over the nvidia-installed module.
If you want to fix this follow this procedure
sudo apt-get install build-essential
sudo apt-get install xserver-xorg-dev
sudo vi /etc/default/linux-restricted-modules*
Change the DISABLED_MODULES=”" to DISABLED_MODULES=”nv”
Save the file and exit.Now you need to reboot your machine.
After reboot, download the proper driver package from the nVidia website and save it somewhere where you can easily access it.
Now you need to press Ctrl-Alt-F2 to open up a console and login
Use the following command to shutdown Xorg
sudo /etc/init.d/gdm stop
Now run the following command from the location where you saved the nV file.
sudo sh NV*
Run through the installer and tell it to update your xorg.conf for you.
Reboot once again (just type reboot at the console) and you should have full nVidia acceleration.
The restricted drivers manager has made things a mess for a lot of people with newer and older nVidia cards.The restricted modules are getting load priority over the nvidia-installed module.
If you want to fix this follow this procedure
sudo apt-get install build-essential
sudo apt-get install xserver-xorg-dev
sudo vi /etc/default/linux-restricted-modules*
Change the DISABLED_MODULES=”" to DISABLED_MODULES=”nv”
Save the file and exit.Now you need to reboot your machine.
After reboot, download the proper driver package from the nVidia website and save it somewhere where you can easily access it.
Now you need to press Ctrl-Alt-F2 to open up a console and login
Use the following command to shutdown Xorg
sudo /etc/init.d/gdm stop
Now run the following command from the location where you saved the nV file.
sudo sh NV*
Run through the installer and tell it to update your xorg.conf for you.
Reboot once again (just type reboot at the console) and you should have full nVidia acceleration.
-
- 帖子: 309
- 注册时间: 2006-01-04 19:26
总结下来就是这样:
安装好以后,设置好网络 源
然后按提示确认就是了,中间有可能问你是否要NV网站下载内核模块,选否
再
安装好以后,设置好网络 源
代码: 全选
crtl+alt+f1
sudo apt-get install build-essential
sudo apt-get install xserver-xorg-dev
sudo vi /etc/default/linux-restricted-modules*
将DISABLED_MODULES=" " 改为DISABLED_MODULES="nv nvidia_new"
sudo /etc/init.d/gdm stop
sudo sh NVIDIA *.run
再
代码: 全选
sudo /etc/init.d/gdm start
Athlon 64 X2 Dual Core Processor 4200+ Socket 939 OC 2.8 GHZ
G.Skill DDR400 2 3 2 5 1GB *2 Dual Channel OC DDR500
Szgalaxy 8600 GTE 650MHZ/2000MHZ
Seagate 80GB *2 RAID 0+Maxtor 80G
DFI LanParty UT NF4-D
kernel 2.6.22-ck1 再见,Con Kolivas!
G.Skill DDR400 2 3 2 5 1GB *2 Dual Channel OC DDR500
Szgalaxy 8600 GTE 650MHZ/2000MHZ
Seagate 80GB *2 RAID 0+Maxtor 80G
DFI LanParty UT NF4-D
kernel 2.6.22-ck1 再见,Con Kolivas!
- qianwx
- 帖子: 730
- 注册时间: 2006-07-08 14:41
挑主要的说吧。首先依次执行以下2行命令
然后执行下列命令,并修改其中DISABLED_MODULES=""为 DISABLED_MODULES="nv"
修改完毕,保存退出,并重新启动系统。
重新启动完毕后,从Nvidia官方下载8系列驱动。之后按 Ctrl-Alt-F2 进入控制台。以root身份登录(这可以避免使用sudo前缀),如从未修改过root密码,则以安装系统时创建的那个帐号登录。但以下命令都需在命令前加上sudo。用下列命令关闭当前X窗口
注:如你使用的是kde的ubuntu,则上述gdm部分改为kdm
之后运行下列命令
这会帮你安装驱动并配置xorg.conf,安装配置完毕,再次重新启动你的系统。
代码: 全选
sudo apt-get install build-essential
sudo apt-get install xserver-xorg-dev
代码: 全选
sudo vi /etc/default/linux-restricted-modules*
重新启动完毕后,从Nvidia官方下载8系列驱动。之后按 Ctrl-Alt-F2 进入控制台。以root身份登录(这可以避免使用sudo前缀),如从未修改过root密码,则以安装系统时创建的那个帐号登录。但以下命令都需在命令前加上sudo。用下列命令关闭当前X窗口
代码: 全选
sudo /etc/init.d/gdm stop
之后运行下列命令
代码: 全选
sudo sh NV*
-
- 帖子: 309
- 注册时间: 2006-01-04 19:26
有的8系列显卡必须把将DISABLED_MODULES=" " 改为DISABLED_MODULES="nv nvidia_new" .
Athlon 64 X2 Dual Core Processor 4200+ Socket 939 OC 2.8 GHZ
G.Skill DDR400 2 3 2 5 1GB *2 Dual Channel OC DDR500
Szgalaxy 8600 GTE 650MHZ/2000MHZ
Seagate 80GB *2 RAID 0+Maxtor 80G
DFI LanParty UT NF4-D
kernel 2.6.22-ck1 再见,Con Kolivas!
G.Skill DDR400 2 3 2 5 1GB *2 Dual Channel OC DDR500
Szgalaxy 8600 GTE 650MHZ/2000MHZ
Seagate 80GB *2 RAID 0+Maxtor 80G
DFI LanParty UT NF4-D
kernel 2.6.22-ck1 再见,Con Kolivas!
-
- 帖子: 34
- 注册时间: 2007-07-24 18:21
there is no way to chang itqianwx 写了:
然后执行下列命令,并修改其中DISABLED_MODULES=""为 DISABLED_MODULES="nv"代码: 全选
sudo vi /etc/default/linux-restricted-modules*
- qianwx
- 帖子: 730
- 注册时间: 2006-07-08 14:41
-
- 帖子: 309
- 注册时间: 2006-01-04 19:26
-
- 帖子: 34
- 注册时间: 2007-07-24 18:21
i made a mistake. i habe been here less than 2 weeks.qianwx 写了:不会用vi编辑器,可以用gedit(ubuntu下)或kate(Kubuntu下)。。。。。命令改为如下实际上原来命令中最后的那个*是指按tab键补足其余部分。。。。你该不会不知道tab键可以补足命令或文件的不足部分吧?代码: 全选
sudo gedit /etc/default/linux-restricted-modules-common
Because i use the new kernel gusty 7.10. Bei this there are many problems today. so that i can not write this in chinese. i can not use the terminal also.
and the software sauces just dispeard. now i can not do anything just read the new in this website.
- avrildidi
- 帖子: 179
- 注册时间: 2007-04-25 15:56