当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 12 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : 16:10液晶不以能正确地设置分辨率,现请各位帮忙。
帖子发表于 : 2007-08-13 22:30 
头像

注册: 2007-04-14 20:08
帖子: 104
送出感谢: 6
接收感谢: 0 次
最近换了台MAYA 的16:10液晶,本来心里就应该有说不出的欢喜,但当我重新装好新的UBUNTU的时候,发觉一切都变扁了,我又不能在分辨率设置里设我的分辨率,我按论坛的方法来处理,还是不行,好几次还入不了“X”,后来还是能处理好,但就是不能正确地设置分辨率,现请各位高手帮忙。
我的基本情况是:NVIDIA的GeForce4 MX 4000,MAYA 16:10液晶,我装了nvidia-glx
请问应该怎样安装?
XORG.CONF的内容是:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "nVidia Corporation NV18 [GeForce4 MX 4000]"
Driver "nv"
BusID "PCI:1:0:0"
EndSection

Section "Monitor"
Identifier "LCD-MONITOR"
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation NV18 [GeForce4 MX 4000]"
Monitor "LCD-MONITOR"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1440x1440" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1440x1440" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1440x1440" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1440x1440" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1440x1440" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1440x1440" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection


附件:
Screenshot-2.png
Screenshot-2.png [ 115.87 KiB | 被浏览 966 次 ]

Screenshot.png
Screenshot.png [ 873.28 KiB | 被浏览 955 次 ]

页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2007-08-13 22:34 
头像

注册: 2006-12-23 13:46
帖子: 9203
地址: Azores Islands
送出感谢: 0 次
接收感谢: 1
http://forum.ubuntu.org.cn/viewtopic.php?t=67363

回帖中的内容


_________________
no security measure is worth anything if an attacker has physical access to the machine


页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2007-08-13 23:26 
头像

注册: 2007-04-14 20:08
帖子: 104
送出感谢: 6
接收感谢: 0 次
都看过了,试过还是不行的,我发觉我XORG。CONF里少了这个东西:
HorizSync 31-60
VertRefresh 56-75
EndSection
我的里面没有,另外我输入:“sudo nvidia-xconfig”之后,会显示:
Using X configuration file: "/etc/X11/xorg.conf".
Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup'
New X configuration file written to '/etc/X11/xorg.conf'

vcan@vcan:~$ sudo nvidia-settings

ERROR: NV-CONTROL extension not found on this Display.


ERROR: Unable to determine number of NVIDIA GPUs on ':0.0'.


ERROR: Unable to determine number of NVIDIA Frame Lock Devices on ':0.0'.


ERROR: Unable to determine number of NVIDIA VCSCs on ':0.0'.
我到底错在哪里?


页首
 用户资料  
 
4 楼 
 文章标题 :
帖子发表于 : 2007-08-13 23:38 
头像

注册: 2005-08-14 21:55
帖子: 58428
地址: 长沙
送出感谢: 4
接收感谢: 272
HorizSync是抄显示器后面的铭牌的。
宽屏,奇怪的屏,只能手动强制修改xorg.conf。加分辨率。ddcprobe这些没用的。


_________________
● 鸣学


页首
 用户资料  
 
5 楼 
 文章标题 :
帖子发表于 : 2007-08-13 23:41 
头像

注册: 2006-12-23 13:46
帖子: 9203
地址: Azores Islands
送出感谢: 0 次
接收感谢: 1
ddc如果能认出你的显示器的话,就不用改了。

不正常都是显卡ddc认不出显示器来。

直接手工填写,lcd 不用填什么行场频的

这样就行:

Section "Monitor"
Identifier "LCD-MONITOR"
Option "DPMS"
EndSection

接下来直接改下面的内容。


_________________
no security measure is worth anything if an attacker has physical access to the machine


页首
 用户资料  
 
6 楼 
 文章标题 : Re: 16:10液晶不以能正确地设置分辨率,现请各位帮忙。
帖子发表于 : 2007-08-13 23:51 
头像

注册: 2006-12-23 13:46
帖子: 9203
地址: Azores Islands
送出感谢: 0 次
接收感谢: 1
vcan 写道:
最近换了台MAYA 的16:10液晶,本来心里就应该有说不出的欢喜,但当我重新装好新的UBUNTU的时候,发觉一切都变扁了,我又不能在分辨率设置里设我的分辨率,我按论坛的方法来处理,还是不行,好几次还入不了“X”,后来还是能处理好,但就是不能正确地设置分辨率,现请各位高手帮忙。
我的基本情况是:NVIDIA的GeForce4 MX 4000,MAYA 16:10液晶,我装了nvidia-glx
请问应该怎样安装?
XORG.CONF的内容是:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "nVidia Corporation NV18 [GeForce4 MX 4000]"
Driver "nv"
BusID "PCI:1:0:0"
EndSection

Section "Monitor"
Identifier "LCD-MONITOR"
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation NV18 [GeForce4 MX 4000]"
Monitor "LCD-MONITOR"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1440x1440" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1440x1440" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1440x1440" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1440x1440" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1440x1440" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1440x1440" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection



我晕死,有这样的16:10显示器吗?   


"1440x1440"



_________________
no security measure is worth anything if an attacker has physical access to the machine


页首
 用户资料  
 
7 楼 
 文章标题 :
帖子发表于 : 2007-08-13 23:57 
头像

注册: 2005-08-14 21:55
帖子: 58428
地址: 长沙
送出感谢: 4
接收感谢: 272
呵呵


_________________
● 鸣学


页首
 用户资料  
 
8 楼 
 文章标题 :
帖子发表于 : 2007-08-14 9:20 
头像

注册: 2007-04-14 20:08
帖子: 104
送出感谢: 6
接收感谢: 0 次
"1440x1440" 这个数值不是我改的,我一装好就是出这个数值的了,我也觉得十分奇怪,但把这个数值改为"1440*900_60"(这是我的显示器建议的参数)后,还是用不了这个值,而且我NVIDIA-SETTINGS这个命令时,出来的画面也不对,这个画面是驱动没装好时才会出现的,但我把自带的三个驱动还有从网上下的.RUN都装过,还是不行.
而且我的终端会显示:Using X configuration file: "/etc/X11/xorg.conf".
Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup'
New X configuration file written to '/etc/X11/xorg.conf'

vcan@vcan:~$ sudo nvidia-settings

ERROR: NV-CONTROL extension not found on this Display.


ERROR: Unable to determine number of NVIDIA GPUs on ':0.0'.


ERROR: Unable to determine number of NVIDIA Frame Lock Devices on ':0.0'.


ERROR: Unable to determine number of NVIDIA VCSCs on ':0.0'.


页首
 用户资料  
 
9 楼 
 文章标题 :
帖子发表于 : 2007-08-14 9:51 
头像

注册: 2007-04-28 21:38
帖子: 1026
送出感谢: 0 次
接收感谢: 0 次
引用:
Section "Device"
Identifier "nVidia Corporation NV18 [GeForce4 MX 4000]"
Driver "nv"
BusID "PCI:1:0:0"
EndSection

怎么能是nv呢?
装好驱动后应该是nvidia。。。。


_________________
thinkpad x61 2G DDR no cdrom
--------------------------------------------
ABS学习中
sed学习中
awk学习中
perl学习中
新手描述不清,老手猜测不到,胡乱指挥一通,后果难以预料


页首
 用户资料  
 
10 楼 
 文章标题 :
帖子发表于 : 2007-08-14 10:13 
头像

注册: 2006-12-23 13:46
帖子: 9203
地址: Azores Islands
送出感谢: 0 次
接收感谢: 1
vcan 写道:
"1440x1440" 这个数值不是我改的,我一装好就是出这个数值的了,我也觉得十分奇怪,但把这个数值改为"1440*900_60"(这是我的显示器建议的参数)后,还是用不了这个值,而且我NVIDIA-SETTINGS这个命令时,出来的画面也不对,这个画面是驱动没装好时才会出现的,但我把自带的三个驱动还有从网上下的.RUN都装过,还是不行.
而且我的终端会显示:Using X configuration file: "/etc/X11/xorg.conf".
Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup'
New X configuration file written to '/etc/X11/xorg.conf'

vcan@vcan:~$ sudo nvidia-settings

ERROR: NV-CONTROL extension not found on this Display.


ERROR: Unable to determine number of NVIDIA GPUs on ':0.0'.


ERROR: Unable to determine number of NVIDIA Frame Lock Devices on ':0.0'.


ERROR: Unable to determine number of NVIDIA VCSCs on ':0.0'.



这几天碰到的都是mx400 mx440之类改不了分辨率的情况,我现在用M$ 上网,手上没ubuntu ,........................这么古董的显卡还用它干嘛 :lol: :lol:


帖子
http://forum.ubuntu.org.cn/viewtopic.php?t=69241


中全是mx4xx的问题。


我记得有人说过mx4000有点异类的。


加上这么古董的显卡,配一台如此时尚的显示器,真是面子工程害死人,严厉打击不注重内涵,搞面子工程ubuntu fans   :lol: :lol:




1440*1440 ,应该是显卡ddc没正确认出你的显示器参数,应该是显示器的ddc版本高,显卡的ddc版本太老的原因。



试下用live cd 开机,看下live cd 自动生成的xorg.conf是否正常,如果正常,干脆直接覆盖硬盘中的。然后把驱动卸载后重装下驱动

如果不正常,也尽可能相信live cd ,用live cd 原始的xorg.conf改下,加上1440*900试下。那后面的60我认为不必加,因为显示器是lcd ,这一点你的显卡ddc还是认出来了。



也可试下,系统---首选项中-----改刷新率


_________________
no security measure is worth anything if an attacker has physical access to the machine


页首
 用户资料  
 
11 楼 
 文章标题 :
帖子发表于 : 2007-08-14 10:29 
头像

注册: 2007-04-14 20:08
帖子: 104
送出感谢: 6
接收感谢: 0 次
我试过几次装错了驱动和设错了XORG.CONF入不了X,我就是用LIVECD里的XORG.CONF覆盖错误的设置,从而才可以进入X,所以,用LIVECD的方法是不可行的了.至于我的显卡,我以前也是装过7.04的,那时是用CRT显示器,当时是没有问题的,只是我忘记了应该装什么驱动,又或者NV的驱动改了,我换了显示器才不行的,你可以看看我以前发的帖子.我以前是成功的.
http://forum.ubuntu.org.cn/viewtopic.ph ... highlight=


页首
 用户资料  
 
12 楼 
 文章标题 :
帖子发表于 : 2007-08-14 10:42 
头像

注册: 2006-12-23 13:46
帖子: 9203
地址: Azores Islands
送出感谢: 0 次
接收感谢: 1
在网上找下或irc上问下,我用的N卡安装相当简单: 受限驱动打钩,或sudo apt-get install nvidia-glx-new/ sudo apt-get install nvidia-glx

或sh xxxxxx.run 都没问题


虽然我没有接宽屏显示器,xorg.conf中也没有宽屏内容,但nvdia-settings中都有宽屏选项


如果楼主解决了,请在这里跟帖,我会把你的成功分享给大家的,分享是ubuntu精神所要求的。

http://forum.ubuntu.org.cn/viewtopic.php?t=67363
http://forum.ubuntu.org.cn/viewtopic.php?t=69241
http://forum.ubuntu.org.cn/viewtopic.php?t=41630


_________________
no security measure is worth anything if an attacker has physical access to the machine


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 12 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 3 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译