[问题]装好nv驱动的kubuntu不能保存好刷新率

声卡/显卡/打印机/USB设备等硬件问题(网卡问题请发上面的网卡板块)
回复
头像
darwinux
帖子: 14
注册时间: 2007-03-02 20:39
送出感谢: 0
接收感谢: 0

[问题]装好nv驱动的kubuntu不能保存好刷新率

#1

帖子 darwinux » 2007-08-19 18:08

装好了nvidia-glx,运行nvidia-xconfig,重启X,用nvidia-settings设置,1024x768@75保存到了xorg.conf,贴出本人的xorg.conf,可是重启系统后,刷新率还是43。。。汗。。。,只能又用nvidia-settings在调,每次启动都要调..请大家帮忙看看该怎么解决阿!

代码: 全选

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder3)  Thu Nov  9 17:56:12 PST 2006

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
    RgbPath         "/usr/X11R6/lib/X11/rgb"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Philips LEGEND 105B"
    HorizSync       30.0 - 70.0
    VertRefresh     50.0 - 120.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce4 MX 440 with AGP8X"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "metamodes" "1024x768_75 +0+0; 1280x1024 +0+0; 1024x768 +0+0; 800x600 +0+0; 640x480 +0+0"
    SubSection     "Display"
        Depth       24
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
EndSection
GNU:GNU's Not Unix
janker2lonely
帖子: 557
注册时间: 2007-01-09 11:09
来自: 廣州
送出感谢: 0
接收感谢: 2 次

#2

帖子 janker2lonely » 2007-08-22 5:57

是液晶显示器吧?是的话刷新率不重要。
头像
skyx
论坛版主
帖子: 9203
注册时间: 2006-12-23 13:46
来自: Azores Islands
送出感谢: 0
接收感谢: 1 次
联系:

#3

帖子 skyx » 2007-08-22 8:57

janker2lonely 写了:是液晶显示器吧?是的话刷新率不重要。
ModelName "Philips LEGEND 105B"
飞利浦,联想 ???

n卡刷新率以nvidia-settings中看到的为准,原因可以在论坛搜索。
no security measure is worth anything if an attacker has physical access to the machine
头像
516079251
帖子: 23
注册时间: 2007-08-17 15:45
送出感谢: 0
接收感谢: 0
联系:

#4

帖子 516079251 » 2007-08-24 9:41

楼主运气比我好,我是纯平的,但是刷新绿始终在60。没有办法改成75啊
回复

回到 “常用硬件支持”