我的UBUNTU老是死机。。。郁闷。。。

[fearmind]

今天我运行UBUNTU，但是运行不了几分钟就死了。。。不知道为什么。。。
---
现在我在UBUNTU的环境下发这篇帖子，不知道什么时候机子又要死了。。。
---
调用系统监视器查看进程，除了gnome-system-monitor占用了约25％左右的CPU资源外其他的一切正常。。。系统日志我还不会看。。。
---
路过的高手提点意见吧。。。

[/code]

[skyx]

我听说过sis的显卡只支持win d3d


661就算支持opengl ,和没有差不多

比661要高一个级别的sis662在win上也只支持dx7！！比662 早上市近两年的nvidia c51整合主板都支持dx9了，以今天的眼光，整合主板c51的 opengl性能也还不错，至少vista 和ubuntu cf 的3d桌面跑过来不会显得吃力。

AMD平台的sis 760 和Intel 平台的sis 662 是同一个级别的主板芯版组，显卡都一样的。

sis 整合显卡硬件不支持opengl的,所以3d桌面没法用，一用就会死机，另外sis好像也没有提供linux平台下的3D驱动

[fearmind]

我听说过sis的显卡只支持win d3d


661就算支持opengl ,和没有差不多

比661要高一个级别的sis662在win上也只支持dx7！！比662 早上市近两年的nvidia c51整合主板都支持dx9了，以今天的眼光，整合主板c51的 opengl性能也还不错，至少vista 和ubuntu cf 的3d桌面跑过来不会显得吃力。

AMD平台的sis 760 和Intel 平台的sis 662 是同一个级别的主板芯版组，显卡都一样的。

sis 整合显卡硬件不支持opengl的,所以3d桌面没法用，一用就会死机，另外sis好像也没有提供linux平台下的3D驱动

---
跑3D桌面效果我试过，但是因为是SiS显卡，没有成功。。。放弃了。。。
---
不过，我在没有跑桌面效果的时候也是经常死机，不知道为什么。。。感觉这个系统时而正常时而混乱。。。郁闷得很。。。
---

[skyx]

不排除是硬件兼容性的原因，sis 662 和sis 760 是差不多相对应的两个不同平台的产品。662是去年年中时发布的，760应该还要早一点。

[fearmind]

不排除是硬件兼容性的原因，sis 662 和sis 760 是差不多相对应的两个不同平台的产品。662是去年年中时发布的，760应该还要早一点。

我怎么知道我的硬件有没有和系统冲突呢？

[skyx]

一般来说看下日志

/var/log/Xorg.0.log
~/.xsession-error

也可看其它相关的log

[aitilang]

MM好早啊。。

[aitilang]

dmesg
结果发上来》》》

[fearmind]

以下是正文，不知道是不是这个

[ 0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e8000 size: 0000000000018000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001bed0000 end: 000000001bfd0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001bfd0000 size: 000000000000f000 end: 000000001bfdf000 type: 3
[ 0.000000] copy_e820_map() start: 000000001bfdf000 size: 0000000000021000 end: 000000001c000000 type: 4
[ 0.000000] copy_e820_map() start: 00000000ff780000 size: 0000000000880000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001bfd0000 (usable)
[ 0.000000] BIOS-e820: 000000001bfd0000 - 000000001bfdf000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001bfdf000 - 000000001c000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 447MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 114640) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 114640
[ 0.000000] HighMem 114640 -> 114640
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 114640
[ 0.000000] On node 0 totalpages: 114640
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 863 pages used for memmap
[ 0.000000] Normal zone: 109681 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x000f8770
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x10000517 MSFT 0x00000097) @ 0x1bfd0000
[ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x10000517 MSFT 0x00000097) @ 0x1bfd0200
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x10000517 MSFT 0x00000097) @ 0x1bfd0390
[ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x10000517 MSFT 0x00000097) @ 0x1bfdf040
[ 0.000000] ACPI: DSDT (v001 760GX 760GX-M2 0x00000000 INTL 0x02002026) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:12 APIC version 16
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1c000000:e3780000)
[ 0.000000] Detected 1796.129 MHz processor.
[ 36.062424] Built 1 zonelists. Total pages: 113745
[ 36.062428] Kernel command line: root=UUID=6b40d11f-9faa-4492-9ada-8b4e002bbef3 ro quiet splash locale=zh_CN
[ 36.062573] mapped APIC to ffffd000 (fee00000)
[ 36.062576] mapped IOAPIC to ffffc000 (fec00000)
[ 36.062579] Enabling fast FPU save and restore... done.
[ 36.062581] Enabling unmasked SIMD FPU exception support... done.
[ 36.062589] Initializing CPU#0
[ 36.062635] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 36.063395] Console: colour VGA+ 80x25
[ 36.063605] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 36.064002] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 36.071995] Memory: 443576k/458560k available (1992k kernel code, 14464k reserved, 900k data, 328k init, 0k highmem)
[ 36.072006] virtual kernel memory layout:
[ 36.072007] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 36.072008] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 36.072009] vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB)
[ 36.072011] lowmem : 0xc0000000 - 0xdbfd0000 ( 447 MB)
[ 36.072012] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
[ 36.072013] .data : 0xc02f2374 - 0xc03d36d4 ( 900 kB)
[ 36.072014] .text : 0xc0100000 - 0xc02f2374 (1992 kB)
[ 36.072018] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 36.150622] Calibrating delay using timer specific routine.. 3594.08 BogoMIPS (lpj=7188177)
[ 36.150659] Security Framework v1.0.0 initialized
[ 36.150665] SELinux: Disabled at boot.
[ 36.150679] Mount-cache hash table entries: 512
[ 36.150796] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[ 36.150804] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 36.150807] CPU: L2 Cache: 128K (64 bytes/line)
[ 36.150809] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
[ 36.150819] Compat vDSO mapped to ffffe000.
[ 36.150822] Remapping vsyscall page to ffffe000
[ 36.150831] Checking 'hlt' instruction... OK.
[ 36.166734] SMP alternatives: switching to UP code
[ 36.166956] Freeing SMP alternatives: 11k freed
[ 36.167174] Early unpacking initramfs... done
[ 36.473497] ACPI: Core revision 20060707
[ 36.473961] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 36.475368] CPU0: AMD Sempron(tm) Processor 3000+ stepping 02
[ 36.475385] Total of 1 processors activated (3594.08 BogoMIPS).
[ 36.475478] ENABLING IO-APIC IRQs
[ 36.475640] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 36.622568] Brought up 1 CPUs
[ 36.622776] Booting paravirtualized kernel on bare hardware
[ 36.622845] Time: 10:32:14 Date: 07/26/107
[ 36.622878] NET: Registered protocol family 16
[ 36.622969] EISA bus registered
[ 36.622973] ACPI: bus type pci registered
[ 36.623644] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[ 36.623646] PCI: Using configuration type 1
[ 36.623648] Setting up standard PCI resources
[ 36.631729] ACPI: Interpreter enabled
[ 36.631734] ACPI: Using IOAPIC for interrupt routing
[ 36.632096] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 36.632101] PCI: Probing PCI hardware (bus 00)
[ 36.632710] Boot video device is 0000:01:00.0
[ 36.632736] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 36.640939] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 36.641167] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 36.641386] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 36.641603] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 36.641878] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 36.642100] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 36.642321] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 36.642575] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 10 11 12 14 15)
[ 36.642684] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 36.642695] pnp: PnP ACPI init
[ 36.648744] pnp: PnP ACPI: found 12 devices
[ 36.648749] PnPBIOS: Disabled by ACPI PNP
[ 36.648798] PCI: Using ACPI for IRQ routing
[ 36.648801] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 36.650783] NET: Registered protocol family 8
[ 36.650785] NET: Registered protocol family 20
[ 36.651529] PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
[ 36.651533] PCI: Bridge: 0000:00:01.0
[ 36.651536] IO window: c000-cfff
[ 36.651540] MEM window: dfe00000-dfefffff
[ 36.651544] PREFETCH window: cfd00000-dfcfffff
[ 36.651585] NET: Registered protocol family 2
[ 36.690601] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 36.690686] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 36.690797] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 36.690862] TCP: Hash tables configured (established 16384 bind 8192)
[ 36.690865] TCP reno registered
[ 36.702645] checking if image is initramfs... it is
[ 37.310646] Freeing initrd memory: 6782k freed
[ 37.311024] audit: initializing netlink socket (disabled)
[ 37.311036] audit(1188124334.328:1): initialized
[ 37.311158] VFS: Disk quotas dquot_6.5.1
[ 37.311178] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 37.311226] io scheduler noop registered
[ 37.311228] io scheduler anticipatory registered
[ 37.311231] io scheduler deadline registered
[ 37.311243] io scheduler cfq registered (default)
[ 37.311471] isapnp: Scanning for PnP cards...
[ 37.664807] isapnp: No Plug & Play device found
[ 37.700805] Real Time Clock Driver v1.12ac
[ 37.700842] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 37.700946] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 37.701845] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 37.702135] mice: PS/2 mouse device common for all mice
[ 37.702600] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 37.702804] input: Macintosh mouse button emulation as /class/input/input0
[ 37.702831] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 37.702835] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 37.703039] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 37.703315] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 37.703320] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 37.703419] EISA: Probing bus 0 at eisa.0
[ 37.703452] EISA: Detected 0 cards.
[ 37.733606] TCP cubic registered
[ 37.733618] NET: Registered protocol family 1
[ 37.733643] Using IPI No-Shortcut mode
[ 37.733729] ACPI: (supports S0 S1 S3 S4 S5)
[ 37.733766] Magic number: 3:503:528
[ 37.734146] Freeing unused kernel memory: 328k freed
[ 37.734314] Time: tsc clocksource has been installed.
[ 37.745306] input: AT Translated Set 2 keyboard as /class/input/input1
[ 38.968497] Capability LSM initialized
[ 39.008381] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 39.530940] usbcore: registered new interface driver usbfs
[ 39.530962] usbcore: registered new interface driver hub
[ 39.530980] usbcore: registered new device driver usb
[ 39.531701] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 39.531733] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 16
[ 39.531744] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 39.531895] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[ 39.531913] ohci_hcd 0000:00:03.0: irq 16, io mem 0xdffdc000
[ 39.567653] sis900.c: v1.08.10 Apr. 2 2006
[ 39.608072] usb usb1: configuration #1 chosen from 1 choice
[ 39.608096] hub 1-0:1.0: USB hub found
[ 39.608105] hub 1-0:1.0: 3 ports detected
[ 39.621945] SCSI subsystem initialized
[ 39.626578] libata version 2.20 loaded.
[ 39.714025] ACPI: PCI Interrupt 0000:00:03.1 -> GSI 21 (level, low) -> IRQ 17
[ 39.714039] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 39.714059] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[ 39.714074] ohci_hcd 0000:00:03.1: irq 17, io mem 0xdffdd000
[ 39.775990] usb usb2: configuration #1 chosen from 1 choice
[ 39.776019] hub 2-0:1.0: USB hub found
[ 39.776029] hub 2-0:1.0: 3 ports detected
[ 39.881983] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 18
[ 39.881998] ohci_hcd 0000:00:03.2: OHCI Host Controller
[ 39.882017] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[ 39.882033] ohci_hcd 0000:00:03.2: irq 18, io mem 0xdffde000
[ 39.943934] usb usb3: configuration #1 chosen from 1 choice
[ 39.943963] hub 3-0:1.0: USB hub found
[ 39.943973] hub 3-0:1.0: 2 ports detected
[ 40.050625] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 19
[ 40.050641] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 40.050685] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
[ 40.050716] PCI: cache line size of 64 is not supported by device 0000:00:03.3
[ 40.050728] ehci_hcd 0000:00:03.3: irq 19, io mem 0xdffdf000
[ 40.050735] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 40.050808] usb usb4: configuration #1 chosen from 1 choice
[ 40.050837] hub 4-0:1.0: USB hub found
[ 40.050844] hub 4-0:1.0: 8 ports detected
[ 40.158159] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 20
[ 40.159294] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[ 40.168490] 0000:00:04.0: Using transceiver found at address 1 as default
[ 40.169143] eth0: SiS 900 PCI Fast Ethernet at 0xd000, IRQ 20, 00:14:2a:bd:da:1a.
[ 40.169357] pata_sis 0000:00:02.5: version 0.5.1
[ 40.169457] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
[ 40.169483] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
[ 40.169499] scsi0 : pata_sis
[ 40.498071] ata1.00: ATAPI, max UDMA/100
[ 40.670024] ata1.00: configured for UDMA/100
[ 40.670037] scsi1 : pata_sis
[ 40.891477] ata2.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
[ 40.891482] ata2.00: ATA-7: ST3802110A, 3.AAJ, max UDMA/100
[ 40.891485] ata2.00: 156301488 sectors, multi 16: LBA48
[ 40.958048] ata2.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
[ 40.958054] ata2.00: configured for UDMA/100
[ 40.958546] scsi 0:0:0:0: CD-ROM PIONEER DVD-ROM DVD-126P 1.02 PQ: 0 ANSI: 5
[ 40.958946] scsi 1:0:0:0: Direct-Access ATA ST3802110A 3.AA PQ: 0 ANSI: 5
[ 40.968256] sata_sis 0000:00:05.0: version 0.7
[ 40.968283] ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 21
[ 40.968293] sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode
[ 40.968348] ata3: SATA max UDMA/133 cmd 0x0001ec00 ctl 0x0001e802 bmdma 0x0001dc00 irq 21
[ 40.968375] ata4: SATA max UDMA/133 cmd 0x0001e400 ctl 0x0001e002 bmdma 0x0001dc08 irq 21
[ 40.968388] scsi2 : sata_sis
[ 40.991135] sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
[ 40.991140] Uniform CD-ROM driver Revision: 3.20
[ 40.991330] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 40.995146] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 40.995166] scsi 1:0:0:0: Attached scsi generic sg1 type 0
[ 41.001941] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 41.002050] sda: Write Protect is off
[ 41.002052] sda: Mode Sense: 00 3a 00 00
[ 41.002065] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 41.002117] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 41.002125] sda: Write Protect is off
[ 41.002127] sda: Mode Sense: 00 3a 00 00
[ 41.002138] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 41.002141] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 > sda3
[ 41.093782] sd 1:0:0:0: Attached scsi disk sda
[ 41.281587] ata3: SATA link down (SStatus 0 SControl 300)
[ 41.292125] ATA: abnormal status 0x7F on port 0x0001ec07
[ 41.292226] scsi3 : sata_sis
[ 41.550978] Attempting manual resume
[ 41.550982] swsusp: Resume From Partition 8:8
[ 41.550984] PM: Checking swsusp image.
[ 41.558508] PM: Resume from disk failed.
[ 41.592005] kjournald starting. Commit interval 5 seconds
[ 41.592017] EXT3-fs: mounted filesystem with ordered data mode.
[ 41.609537] ata4: SATA link down (SStatus 0 SControl 300)
[ 41.620077] ATA: abnormal status 0x7F on port 0x0001e407
[ 50.911988] NET: Registered protocol family 17
[ 51.117484] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 51.224388] eth0: Media Link On 100mbps full-duplex
[ 51.284904] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 51.305745] Linux agpgart interface v0.102 (c) Dave Jones
[ 51.328585] agpgart: Detected AGP bridge 0
[ 51.330635] agpgart: AGP aperture is 64M @ 0xe0000000
[ 51.706079] input: PC Speaker as /class/input/input2
[ 51.890433] parport: PnPBIOS parport detected.
[ 51.890503] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 52.083840] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 22
[ 52.394105] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[ 52.403278] intel8x0_measure_ac97_clock: measured 55993 usecs
[ 52.403283] intel8x0: clocking to 48000
[ 52.568149] fuse init (API version 7.8)
[ 52.593440] lp0: using parport0 (interrupt-driven).
[ 52.624548] Adding 104348k swap on /dev/disk/by-uuid/91d38873-5b9a-40f4-87a0-77b4e738835f. Priority:-1 extents:1 across:104348k
[ 52.925009] EXT3 FS on sda9, internal journal
[ 53.042574] NET: Registered protocol family 10
[ 53.042679] lo: Disabled Privacy Extensions
[ 63.336999] eth0: no IPv6 routers present
[ 65.470019] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 65.537926] NTFS volume version 3.1.
[ 65.786797] kjournald starting. Commit interval 5 seconds
[ 65.786945] EXT3 FS on sda10, internal journal
[ 65.786950] EXT3-fs: mounted filesystem with ordered data mode.
[ 71.701207] PPP generic driver version 2.4.2
[ 71.765903] NET: Registered protocol family 24