当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 13 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : 求助!GForce7300安装后黑屏
帖子发表于 : 2007-09-10 10:00 

注册: 2006-06-26 15:37
帖子: 22
送出感谢: 0 次
接收感谢: 0 次
UBUNUT7.04,安装完成后所有组件升级到最新。安装nvidia-glx 9631驱动重启后黑屏无响应。请高手指教!

日志中看不出有什么问题。(请看附件)


附件:
文件注释: 请用记事本打开
Xorg.0.log.tar [17.23 KiB]
被下载 30 次
文件注释: 论坛不允许.conf扩展名,我改成了.tar。请用记事本打开
xorg.conf.tar [3.51 KiB]
被下载 21 次
页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2007-09-10 11:04 

注册: 2007-09-08 19:01
帖子: 48
送出感谢: 0 次
接收感谢: 0 次
我都是用nvidia的官方驱动的。

你的Xorg.0.log不全啊。

我的贴出来,你参考吧:
Section "Files"
EndSection

Section "Module"
#use "glx" to replace "dri" & "GLCore", depending on the instruction of Nvidia Driver
# Load "dri"
# Load "GLCore"
Load "glx"

Load "extmod"
SubSection "extmod"
# Don't initialise the DGA extension
Option "omit XFree86-DGA"
EndSubSection

Load "dbe"

Load "freetype"
Load "bitmap"

Load "vbe"
Load "i2c"
Load "ddc"
Load "int10"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"

Option "SHMConfig" "on"
EndSection

Section "Device"
Identifier "Nvidia Video Card"
# Package "nvidia-glx" is required to enable it.
Driver "nvidia"
BusID "PCI:1:0:0"
Option "NvAGP" "1"
# Option "NoLogo"
# Screen 0

# Enable AIGLX/Compiz nvidia dirver (> 1.0-9629)
Option "AllowGLXWithComposite" "true"
Option "AddARGBGLXVisuals" "true"
# For ATI driver card
## Option "XAANoOffscreenPixmaps" "true"

# Following options should be added when use TwinView to implement double monitor,
# otherwise close option "TwinView"
Option "TwinView" "true"
Option "DynamicTwinView" "true"
Option "UseEdidFreqs" "true"
Option "RenderAccel" "true"
Option "MetaModes" "1280x800,1024x768"
# the value of Option "UseDisplayDevice": DFP(DVI port), CRT(VGA port), TV
Option "UseDisplayDevice" "DFP, DFP"
# Option "ConnectedMonitor" "CRT-0, CRT-1"


# If option "TwinView" is "false", following options will not have effect.
# "LeftOf" means the poisition of second display relative to the first.
# Others :"RightOf"(the default) "Above" "Below" "Clone"
Option "TwinViewOrientation" "RightOf"
# Option "TwinViewOrientation" "CRT-0 LeftOf CRT-1"
Option "RandRRotation" "true"
EndSection

Section "Monitor"
Identifier "z99jn Monitor"
Option "DPMS"
# 14 inch
# HorizSync 28-33
# VertRefresh 43-72
# auto
# HorizSync 28-64
# VertRefresh 43-60
# 1280x960
HorizSync 30-60
VertRefresh 50-75
# 1024x768
# HorizSync 30-70
# VertRefresh 50-160
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Nvidia Video Card"
Monitor "z99jn Monitor"
DefaultDepth 24
SubSection "Display"
Depth 16
Modes "1280x800" "1280x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800" "1280x768"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"

# Use Xinerma
# Option "Xinerama" "true"
# Screen 0 "First Screen"
# Screen 1 "Second Screen" RightOf "First Screen"

# Enable AIGLX
Option "AIGLX" "true"
EndSection

Section "Extensions"
# Enable AIGLX/Compiz
Option "Composite" "Enable"
Option "RENDER" "true"
Option "DAMAGE" "true"
EndSection


页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2007-09-10 12:59 

注册: 2006-06-26 15:37
帖子: 22
送出感谢: 0 次
接收感谢: 0 次
Xorg.0.log文件里只记录了这些日志,可能是启动到一半黑屏死机了吧!

xorg.conf文件应该是没有问题的。这里有一个"Option "UseDisplayDevice" "DFP" "是我手动加上去的。(ubuntu forum提到nvidia显卡驱动有个bug是显卡信号会输出到CRT显示器,而非液晶)

我用源里新的nvidia驱动 nvidia-glx-new 97**也不行,提示API不匹配。 :(


页首
 用户资料  
 
4 楼 
 文章标题 :
帖子发表于 : 2007-09-10 17:00 

注册: 2006-06-26 15:37
帖子: 22
送出感谢: 0 次
接收感谢: 0 次
高人来帮忙看看啊!


页首
 用户资料  
 
5 楼 
 文章标题 :
帖子发表于 : 2007-09-10 20:10 

注册: 2007-09-08 19:01
帖子: 48
送出感谢: 0 次
接收感谢: 0 次
langzi133 写道:
Xorg.0.log文件里只记录了这些日志,可能是启动到一半黑屏死机了吧!

xorg.conf文件应该是没有问题的。这里有一个"Option "UseDisplayDevice" "DFP" "是我手动加上去的。(ubuntu forum提到nvidia显卡驱动有个bug是显卡信号会输出到CRT显示器,而非液晶)

我用源里新的nvidia驱动 nvidia-glx-new 97**也不行,提示API不匹配。 :(


如果是nvidia驱动的问题,xorg启动不了,它会中断的,会有完整的xorg.0.log输出,怎么会只有一半呢?我倒是从没有遇到过启动X当机的呢。

nvidia的驱动,用源里的,不是.run的话,一定要和kernel的版本匹配,不能随便装的。去nvidia的官网,安装最新的驱动,不很好吗?

你的机器总不会连控制台都进不去吧。系统启动,最后会启动gdm。先进控制台让gdm不要启动。

贴出你的内核版本,硬件的信息。

大家都用得好好的,应该不是源里软件的问题。nvidia的驱动也不单单只支持go 7300的呀。


页首
 用户资料  
 
6 楼 
 文章标题 :
帖子发表于 : 2007-09-11 10:48 

注册: 2006-06-26 15:37
帖子: 22
送出感谢: 0 次
接收感谢: 0 次
leoc 写道:
langzi133 写道:
Xorg.0.log文件里只记录了这些日志,可能是启动到一半黑屏死机了吧!

xorg.conf文件应该是没有问题的。这里有一个"Option "UseDisplayDevice" "DFP" "是我手动加上去的。(ubuntu forum提到nvidia显卡驱动有个bug是显卡信号会输出到CRT显示器,而非液晶)

我用源里新的nvidia驱动 nvidia-glx-new 97**也不行,提示API不匹配。 :(


如果是nvidia驱动的问题,xorg启动不了,它会中断的,会有完整的xorg.0.log输出,怎么会只有一半呢?我倒是从没有遇到过启动X当机的呢。

nvidia的驱动,用源里的,不是.run的话,一定要和kernel的版本匹配,不能随便装的。去nvidia的官网,安装最新的驱动,不很好吗?
确实是很奇怪啊!系统是刚刚重新安装的,用的是官方源里的nvidia-glx-9631的驱动。nvidia官网的驱动也试过,同样的问题,启动到一半就黑在那里了,也无法切换到其它终端。但CTR+ALT+DEL键有效。至于日志只有一半的问题我也没法解释。

你的机器总不会连控制台都进不去吧。系统启动,最后会启动gdm。先进控制台让gdm不要启动。

贴出你的内核版本,硬件的信息。
晚上回去贴出来,请指教!

大家都用得好好的,应该不是源里软件的问题。nvidia的驱动也不单单只支持go 7300的呀。


谢谢你的回复:


页首
 用户资料  
 
7 楼 
 文章标题 :
帖子发表于 : 2007-09-11 11:02 
头像

注册: 2006-12-23 13:46
帖子: 9203
地址: Azores Islands
送出感谢: 0 次
接收感谢: 1
langzi133 写道:

我用源里新的nvidia驱动 nvidia-glx-new 97**也不行,提示API不匹配。 :(


用源中的驱动,提示API不匹配

至少有一种可能的原因: 人为改了linux-restricted-modules-common

加了不该加的 "nv"

另外: 从源中安装驱动,首先要保证系统干净。手动安装的驱动没干净卸载前,从源里安装不大可能成功。从源中安装n卡,没必要先upgrade。可直接安装。

如果源中的驱动支持你的显卡

从源安装驱动不成功,手动从nvidia下载驱动手动安装成功的机会也没有什么明显提高,至少我可以肯定不是100%提升这种成功的机会。

有些非公版n卡有点奇怪。

奇怪的n卡采用AGP接口 的多,可能的原因是厂商采用了非原生的AGP显示芯片,芯片是pcie 接口的,通过桥接实现AGP的。处于AGP PCIE大量过渡的时代,AGP 接口的7系N卡问题多,也不排除是主板的原因。主板的agp 接口如果没驱动,显卡同样会不正常,只能猜测,但真正的原因不详。

我推荐购买公版设计的N卡原因就在这里。

论坛有老会员一直都没把手中的AGP N卡安装成功的个例。


_________________
no security measure is worth anything if an attacker has physical access to the machine


页首
 用户资料  
 
8 楼 
 文章标题 :
帖子发表于 : 2007-09-11 18:17 

注册: 2006-06-26 15:37
帖子: 22
送出感谢: 0 次
接收感谢: 0 次
我用的是海尔w66的机器,一直以来都是好用的,前几天更新了一下,从此就不行了。系统重装用源里的或官方的.run驱动都不行。用以前的ghost 备份恢复竟然的还是不行。 :?:

难道偶的显卡出问题了?可XP下用的好好的啊?


页首
 用户资料  
 
9 楼 
 文章标题 :
帖子发表于 : 2007-09-11 20:26 
头像

注册: 2007-02-25 22:55
帖子: 185
送出感谢: 0 次
接收感谢: 0 次
以前是好的,更新后不行了,不行选老内核启动就可以的,其它原因不详。

图片


页首
 用户资料  
 
10 楼 
 文章标题 :
帖子发表于 : 2007-09-13 23:00 

注册: 2006-06-26 15:37
帖子: 22
送出感谢: 0 次
接收感谢: 0 次
这问题折磨我一个星期了,还是没搞定。不管官方源里安源还是nvidia官网的.run文件安装都不行。最终都是起到一半黑在那里,而且日志文件也只有一半。请高手帮忙瞧瞧!
以下是相关的日志,比较长,请耐心看一看。

Xorg.0.log内容:

X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: Linux Ubuntu
Current Operating System: Linux taoj-laptop 2.6.20-16-generic #2 SMP Fri Aug 31 00:55:27 UTC 2007 i686
Build Date: 04 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 13 22:46:30 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "通用显示器"
(**) | |-->Device "nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300]"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "stylus"
(**) |-->Input Device "cursor"
(**) |-->Input Device "eraser"
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
/usr/share/fonts/X11/misc,
/usr/X11R6/lib/X11/fonts/misc,
/usr/share/fonts/X11/cyrillic,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/X11R6/lib/X11/fonts/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81c92e0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.1
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,27a0 card 1991,7001 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,27a1 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1b:0: chip 8086,27d8 card 1991,5625 rev 02 class 04,03,00 hdr 00
(II) PCI: 00:1d:0: chip 8086,27c8 card 1991,7011 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,27c9 card 1991,7011 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,27ca card 1991,7011 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,27cb card 1991,7011 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,27cc card 1991,7012 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev e2 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,27b9 card 8086,1999 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,27c4 card 1991,7011 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:1f:3: chip 8086,27da card 1991,7011 rev 02 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 10de,01d7 card 1991,5532 rev a1 class 03,00,00 hdr 00
(II) PCI: 02:02:0: chip 10ec,8167 card 1991,6033 rev 10 class 02,00,00 hdr 00
(II) PCI: 02:0a:0: chip 104c,8039 card 2400,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 02:0a:1: chip 104c,803a card 1991,6022 rev 00 class 0c,00,10 hdr 80
(II) PCI: 02:0a:2: chip 104c,803b card 5678,1234 rev 00 class 01,80,00 hdr 80
(II) PCI: 03:00:0: chip 11ab,1faa card 11ab,1faa rev 03 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x001c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd0000000 - 0xd1ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,6), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX[B]
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xd2000000 - 0xd20fffff (0x100000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x30000000 - 0x35ffffff (0x6000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:10:0), (2,3,6), BCTRL: 0x0500 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[1] -1 0 0x00002800 - 0x000028ff (0x100) IX[B]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0x30000000 - 0x33ffffff (0x4000000) MX[B]
(--) PCI:*(1:0:0) nVidia Corporation Quadro NVS 110M / GeForce Go 7300 rev 161, Mem @ 0xd1000000/24, 0xc0000000/28, 0xd0000000/24
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0x38010000 - 0x3801ffff (0x10000) MX[B]
[1] -1 0 0x38000000 - 0x3800ffff (0x10000) MX[B]
[2] -1 0 0xd2004000 - 0xd2004fff (0x1000) MX[B]
[3] -1 0 0xd2000000 - 0xd2003fff (0x4000) MX[B]
[4] -1 0 0xd2005000 - 0xd20057ff (0x800) MX[B]
[5] -1 0 0xd2005800 - 0xd20058ff (0x100) MX[B]
[6] -1 0 0xd2304000 - 0xd23043ff (0x400) MX[B]
[7] -1 0 0xd2300000 - 0xd2303fff (0x4000) MX[B]
[8] -1 0 0xd0000000 - 0xd0ffffff (0x1000000) MX[B](B)
[9] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[10] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B](B)
[11] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[12] -1 0 0x000018c0 - 0x000018df (0x20) IX[B]
[13] -1 0 0x000018b0 - 0x000018bf (0x10) IX[B]
[14] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[15] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[16] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[17] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[18] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[19] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[20] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[21] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0x38010000 - 0x3801ffff (0x10000) MX[B]
[1] -1 0 0x38000000 - 0x3800ffff (0x10000) MX[B]
[2] -1 0 0xd2004000 - 0xd2004fff (0x1000) MX[B]
[3] -1 0 0xd2000000 - 0xd2003fff (0x4000) MX[B]
[4] -1 0 0xd2005000 - 0xd20057ff (0x800) MX[B]
[5] -1 0 0xd2005800 - 0xd20058ff (0x100) MX[B]
[6] -1 0 0xd2304000 - 0xd23043ff (0x400) MX[B]
[7] -1 0 0xd2300000 - 0xd2303fff (0x4000) MX[B]
[8] -1 0 0xd0000000 - 0xd0ffffff (0x1000000) MX[B](B)
[9] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[10] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B](B)
[11] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[12] -1 0 0x000018c0 - 0x000018df (0x20) IX[B]
[13] -1 0 0x000018b0 - 0x000018bf (0x10) IX[B]
[14] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[15] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[16] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[17] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[18] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[19] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[20] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[21] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x37ffffff (0x37f00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x37ffffff (0x37f00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x38010000 - 0x3801ffff (0x10000) MX[B]
[5] -1 0 0x38000000 - 0x3800ffff (0x10000) MX[B]
[6] -1 0 0xd2004000 - 0xd2004fff (0x1000) MX[B]
[7] -1 0 0xd2000000 - 0xd2003fff (0x4000) MX[B]
[8] -1 0 0xd2005000 - 0xd20057ff (0x800) MX[B]
[9] -1 0 0xd2005800 - 0xd20058ff (0x100) MX[B]
[10] -1 0 0xd2304000 - 0xd23043ff (0x400) MX[B]
[11] -1 0 0xd2300000 - 0xd2303fff (0x4000) MX[B]
[12] -1 0 0xd0000000 - 0xd0ffffff (0x1000000) MX[B](B)
[13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[14] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[18] -1 0 0x000018c0 - 0x000018df (0x20) IX[B]
[19] -1 0 0x000018b0 - 0x000018bf (0x10) IX[B]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[24] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[25] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[26] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[27] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
(II) LoadModule: "i2c"
(II) Loading /usr/lib/xorg/modules//libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules//libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.2.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.9631
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.9631
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) Wacom driver level: 47-0.7.7-7 $
(II) NVIDIA dlloader X Driver 1.0-9631 Thu Nov 9 17:39:58 PST 2006
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules//libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.1
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x37ffffff (0x37f00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x38010000 - 0x3801ffff (0x10000) MX[B]
[5] -1 0 0x38000000 - 0x3800ffff (0x10000) MX[B]
[6] -1 0 0xd2004000 - 0xd2004fff (0x1000) MX[B]
[7] -1 0 0xd2000000 - 0xd2003fff (0x4000) MX[B]
[8] -1 0 0xd2005000 - 0xd20057ff (0x800) MX[B]
[9] -1 0 0xd2005800 - 0xd20058ff (0x100) MX[B]
[10] -1 0 0xd2304000 - 0xd23043ff (0x400) MX[B]
[11] -1 0 0xd2300000 - 0xd2303fff (0x4000) MX[B]
[12] -1 0 0xd0000000 - 0xd0ffffff (0x1000000) MX[B](B)
[13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[14] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[18] -1 0 0x000018c0 - 0x000018df (0x20) IX[B]
[19] -1 0 0x000018b0 - 0x000018bf (0x10) IX[B]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[24] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[25] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[26] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[27] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x37ffffff (0x37f00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x38010000 - 0x3801ffff (0x10000) MX[B]
[5] -1 0 0x38000000 - 0x3800ffff (0x10000) MX[B]
[6] -1 0 0xd2004000 - 0xd2004fff (0x1000) MX[B]
[7] -1 0 0xd2000000 - 0xd2003fff (0x4000) MX[B]
[8] -1 0 0xd2005000 - 0xd20057ff (0x800) MX[B]
[9] -1 0 0xd2005800 - 0xd20058ff (0x100) MX[B]
[10] -1 0 0xd2304000 - 0xd23043ff (0x400) MX[B]
[11] -1 0 0xd2300000 - 0xd2303fff (0x4000) MX[B]
[12] -1 0 0xd0000000 - 0xd0ffffff (0x1000000) MX[B](B)
[13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[14] -1 0 0xd1000000 - 0xd1ffffff (0x1000000) MX[B](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[21] -1 0 0x000018c0 - 0x000018df (0x20) IX[B]
[22] -1 0 0x000018b0 - 0x000018bf (0x10) IX[B]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[25] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[27] -1 0 0x00001860 - 0x0000187f (0x20) IX[B]
[28] -1 0 0x00001840 - 0x0000185f (0x20) IX[B]
[29] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[30] -1 0 0x00001800 - 0x0000181f (0x20) IX[B]
[31] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[32] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "UseDisplayDevice" "DFP"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.

/etc/X11/xorg.conf内容:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
Fontpath "/usr/share/fonts/X11/misc"
Fontpath "/usr/share/fonts/X11/cyrillic"
Fontpath "/usr/share/fonts/X11/100dpi/:unscaled"
Fontpath "/usr/share/fonts/X11/75dpi/:unscaled"
Fontpath "/usr/share/fonts/X11/Type1"
Fontpath "/usr/share/fonts/X11/100dpi"
Fontpath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
Fontpath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
Identifier "nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300]"
Driver "nv"
Busid "PCI:1:0:0"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
EndSection

Section "Monitor"
Identifier "通用显示器"
Option "DPMS"
Horizsync 28-51
Vertrefresh 43-60
EndSection

Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300]"
Monitor "通用显示器"
Defaultdepth 24
Option "UseDisplayDevice" "DFP"
SubSection "Display"
Depth 1
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
screen "Default Screen"
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
Inputdevice "stylus" "SendCoreEvents"
Inputdevice "cursor" "SendCoreEvents"
Inputdevice "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection

#uname -a ##内核版本
Linux taoj-laptop 2.6.20-16-generic #2 SMP Fri Aug 31 00:55:27 UTC 2007 i686 GNU/Linux

###内核起动信息
[ 0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Fri Aug 31 00:55:27 UTC 2007 (Ubuntu 2.6.20-16.31-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000008000 end: 00000000000e4000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e8000 size: 0000000000018000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fd90000 end: 000000001fe90000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001fe90000 size: 0000000000009000 end: 000000001fe99000 type: 3
[ 0.000000] copy_e820_map() start: 000000001fe99000 size: 0000000000067000 end: 000000001ff00000 type: 4
[ 0.000000] copy_e820_map() start: 000000001ff00000 size: 0000000000100000 end: 0000000020000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed00000 size: 0000000000000400 end: 00000000fed00400 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 end: 00000000fed90000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fe90000 (usable)
[ 0.000000] BIOS-e820: 000000001fe90000 - 000000001fe99000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001fe99000 - 000000001ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 510MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f7650
[ 0.000000] Entering add_active_range(0, 0, 130704) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 130704
[ 0.000000] HighMem 130704 -> 130704
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 130704
[ 0.000000] On node 0 totalpages: 130704
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 989 pages used for memmap
[ 0.000000] Normal zone: 125619 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v000 PTLTD ) @ 0x000f75a0
[ 0.000000] ACPI: RSDT (v001 PTLTD Capell00 0x06040000 LTP 0x00000000) @ 0x1fe906cc
[ 0.000000] ACPI: FADT (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x1fe98e20
[ 0.000000] ACPI: MADT (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x1fe98e94
[ 0.000000] ACPI: HPET (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x1fe98efc
[ 0.000000] ACPI: MCFG (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x1fe98f34
[ 0.000000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x1fe98f70
[ 0.000000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1fe98fd8
[ 0.000000] ACPI: SSDT (v001 SataRe SataPri 0x00001000 INTL 0x20050624) @ 0x1fe917b2
[ 0.000000] ACPI: SSDT (v001 SataRe SataSec 0x00001000 INTL 0x20050624) @ 0x1fe91120
[ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x1fe90714
[ 0.000000] ACPI: DSDT (v001 INTEL CALISTGA 0x06040000 INTL 0x20050624) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: 2 duplicate APIC table ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[ 0.000000] Detected 1862.166 MHz processor.
[ 22.758379] Built 1 zonelists. Total pages: 129683
[ 22.758383] Kernel command line: root=UUID=e7925c72-79fd-4ec4-b8e6-65e31fde9e1f ro vga=792 locale=zh_CN single
[ 22.758547] mapped APIC to ffffd000 (fee00000)
[ 22.758549] mapped IOAPIC to ffffc000 (fec00000)
[ 22.758552] Enabling fast FPU save and restore... done.
[ 22.758554] Enabling unmasked SIMD FPU exception support... done.
[ 22.758561] Initializing CPU#0
[ 22.758637] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 22.758675] Console: colour dummy device 80x25
[ 22.758958] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 22.759136] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 22.770340] Memory: 507320k/522816k available (1993k kernel code, 15008k reserved, 900k data, 328k init, 0k highmem)
[ 22.770353] virtual kernel memory layout:
[ 22.770355] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 22.770356] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 22.770357] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 22.770358] lowmem : 0xc0000000 - 0xdfe90000 ( 510 MB)
[ 22.770359] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
[ 22.770361] .data : 0xc02f2434 - 0xc03d36d4 ( 900 kB)
[ 22.770362] .text : 0xc0100000 - 0xc02f2434 (1993 kB)
[ 22.770377] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 22.770540] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 22.770548] hpet0: 3 64-bit timers, 14318180 Hz
[ 22.771553] Using HPET for base-timer
[ 22.850408] Calibrating delay using timer specific routine.. 3728.49 BogoMIPS (lpj=7456983)
[ 22.850447] Security Framework v1.0.0 initialized
[ 22.850455] SELinux: Disabled at boot.
[ 22.850472] Mount-cache hash table entries: 512
[ 22.850588] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[ 22.850596] monitor/mwait feature present.
[ 22.850600] using mwait in idle threads.
[ 22.850605] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 22.850608] CPU: L2 cache: 2048K
[ 22.850612] CPU: Physical Processor ID: 0
[ 22.850615] CPU: Processor Core ID: 0
[ 22.850618] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000
[ 22.850626] Compat vDSO mapped to ffffe000.
[ 22.850631] Remapping vsyscall page to ffffe000
[ 22.850643] Checking 'hlt' instruction... OK.
[ 22.866475] SMP alternatives: switching to UP code
[ 22.866792] Early unpacking initramfs... done
[ 23.165245] ACPI: Core revision 20060707
[ 23.191967] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 23.198955] CPU0: Intel(R) Core(TM) Duo CPU T2350 @ 1.86GHz stepping 0c
[ 23.198978] SMP alternatives: switching to SMP code
[ 23.199105] Booting processor 1/1 eip 3000
[ 23.209519] Initializing CPU#1
[ 23.289663] Calibrating delay using timer specific routine.. 3724.23 BogoMIPS (lpj=7448471)
[ 23.289669] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[ 23.289674] monitor/mwait feature present.
[ 23.289677] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 23.289679] CPU: L2 cache: 2048K
[ 23.289681] CPU: Physical Processor ID: 0
[ 23.289683] CPU: Processor Core ID: 1
[ 23.289684] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000
[ 23.290140] CPU1: Intel(R) Core(TM) Duo CPU T2350 @ 1.86GHz stepping 0c
[ 23.290178] Total of 2 processors activated (7452.72 BogoMIPS).
[ 23.290384] ENABLING IO-APIC IRQs
[ 23.290593] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 23.437415] checking TSC synchronization across 2 CPUs: passed.
[ 0.003991] Brought up 2 CPUs
[ 0.319664] migration_cost=54
[ 0.319940] Booting paravirtualized kernel on bare hardware
[ 0.320048] Time: 22:48:15 Date: 08/13/107
[ 0.320077] NET: Registered protocol family 16
[ 0.320158] EISA bus registered
[ 0.320164] ACPI: bus type pci registered
[ 0.347349] PCI: PCI BIOS revision 2.10 entry at 0xfd813, last bus=2
[ 0.347353] PCI: Using configuration type 1
[ 0.347356] Setting up standard PCI resources
[ 0.353273] ACPI: Interpreter enabled
[ 0.353278] ACPI: Using IOAPIC for interrupt routing
[ 0.354652] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.354666] PCI: Probing PCI hardware (bus 00)
[ 0.356122] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.356129] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.356356] Boot video device is 0000:01:00.0
[ 0.356752] PCI: Transparent bridge - 0000:00:1e.0
[ 0.356829] PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
[ 0.356835] Please report the result to linux-kernel to fix this permanently
[ 0.356870] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.359931] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.361824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.362612] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.362859] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.363109] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.363355] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.363608] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.363855] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.364100] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.364345] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.372957] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.372970] pnp: PnP ACPI init
[ 0.375673] pnp: PnP ACPI: found 11 devices
[ 0.375681] PnPBIOS: Disabled by ACPI PNP
[ 0.375729] PCI: Using ACPI for IRQ routing
[ 0.375733] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.383696] NET: Registered protocol family 8
[ 0.383700] NET: Registered protocol family 20
[ 0.383986] pnp: 00:07: ioport range 0x6a0-0x6af has been reserved
[ 0.383991] pnp: 00:07: ioport range 0x6b0-0x6ff has been reserved
[ 0.384250] PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
[ 0.384256] PCI: Bridge: 0000:00:01.0
[ 0.384258] IO window: disabled.
[ 0.384264] MEM window: d0000000-d1ffffff
[ 0.384268] PREFETCH window: c0000000-cfffffff
[ 0.384282] PCI: Bus 3, cardbus bridge: 0000:02:0a.0
[ 0.384285] IO window: 00002400-000024ff
[ 0.384292] IO window: 00002800-000028ff
[ 0.384298] PREFETCH window: 30000000-33ffffff
[ 0.384305] MEM window: 38000000-3bffffff
[ 0.384310] PCI: Bridge: 0000:00:1e.0
[ 0.384315] IO window: 2000-2fff
[ 0.384322] MEM window: d2000000-d20fffff
[ 0.384328] PREFETCH window: 30000000-35ffffff
[ 0.384347] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.384355] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.384366] PCI: Enabling device 0000:00:1e.0 (0104 -> 0107)
[ 0.384374] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.384391] PCI: Enabling device 0000:02:0a.0 (0000 -> 0003)
[ 0.384398] ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 20 (level, low) -> IRQ 17
[ 0.384408] PCI: Setting latency timer of device 0000:02:0a.0 to 64
[ 0.384438] NET: Registered protocol family 2
[ 0.439284] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.439360] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.439448] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.439493] TCP: Hash tables configured (established 16384 bind 8192)
[ 0.439497] TCP reno registered
[ 0.455309] checking if image is initramfs... it is
[ 1.048897] Freeing initrd memory: 6780k freed
[ 1.049105] Simple Boot Flag at 0x36 set to 0x1
[ 1.049560] audit: initializing netlink socket (disabled)
[ 1.049576] audit(1189723695.800:1): initialized
[ 1.049748] VFS: Disk quotas dquot_6.5.1
[ 1.049768] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.049819] io scheduler noop registered
[ 1.049824] io scheduler anticipatory registered
[ 1.049827] io scheduler deadline registered
[ 1.049840] io scheduler cfq registered (default)
[ 1.050061] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 1.050097] assign_interrupt_mode Found MSI capability
[ 1.050102] Allocate Port Service[0000:00:01.0:pcie00]
[ 1.050250] isapnp: Scanning for PnP cards...
[ 1.403450] isapnp: No Plug & Play device found
[ 1.424833] Real Time Clock Driver v1.12ac
[ 1.424909] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.425507] mice: PS/2 mouse device common for all mice
[ 1.426055] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1.426269] input: Macintosh mouse button emulation as /class/input/input0
[ 1.426302] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1.426308] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.426600] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.438791] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.447523] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.447528] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.447532] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.447536] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.447540] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.448306] EISA: Probing bus 0 at eisa.0
[ 1.448316] Cannot allocate resource for EISA slot 1
[ 1.448321] Cannot allocate resource for EISA slot 2
[ 1.448347] EISA: Detected 0 cards.
[ 1.475348] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.478752] TCP cubic registered
[ 1.478764] NET: Registered protocol family 1
[ 1.478789] Starting balanced_irq
[ 1.478798] Using IPI No-Shortcut mode
[ 1.478901] ACPI: (supports S0 S3 S4 S5)
[ 1.478950] Magic number: 7:118:856
[ 1.479036] hash matches device ptyv8
[ 1.479049] hash matches device ptysb
[ 1.479266] Freeing unused kernel memory: 328k freed
[ 1.481487] Time: tsc clocksource has been installed.
[ 1.551247] vesafb: framebuffer at 0xc0000000, mapped to 0xe0880000, using 6144k, total 131072k
[ 1.551259] vesafb: mode is 1024x768x32, linelength=4096, pages=1
[ 1.551263] vesafb: protected mode interface info at c000:d5d0
[ 1.551267] vesafb: pmi: set display start = c00cd606, set palette = c00cd670
[ 1.551271] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[ 1.551286] vesafb: scrolling: redraw
[ 1.551289] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.605222] Console: switching to colour frame buffer device 128x48
[ 1.659648] fb0: VESA VGA frame buffer device
[ 1.795669] Capability LSM initialized
[ 1.825355] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
[ 1.826539] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
[ 1.827788] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 1.828348] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.829502] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
[ 1.830664] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
[ 1.831939] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 1.832499] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 2.404000] ACPI: Thermal Zone [THZN] (59 C)
[ 2.412000] Time: hpet clocksource has been installed.
[ 2.708000] usbcore: registered new interface driver usbfs
[ 2.712000] usbcore: registered new interface driver hub
[ 2.712000] usbcore: registered new device driver usb
[ 2.716000] USB Universal Host Controller Interface driver v3.0
[ 2.720000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
[ 2.724000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 2.724000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.728000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.732000] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00001800
[ 2.736000] usb usb1: configuration #1 chosen from 1 choice
[ 2.740000] hub 1-0:1.0: USB hub found
[ 2.744000] hub 1-0:1.0: 2 ports detected
[ 2.748000] ieee1394: Initialized config rom entry `ip1394'
[ 2.852000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 2.856000] SCSI subsystem initialized
[ 2.856000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 2.856000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.856000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 2.856000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[ 2.856000] usb usb2: configuration #1 chosen from 1 choice
[ 2.856000] hub 2-0:1.0: USB hub found
[ 2.856000] hub 2-0:1.0: 2 ports detected
[ 2.960000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 2.960000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 2.960000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.960000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 2.960000] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00001840
[ 2.960000] usb usb3: configuration #1 chosen from 1 choice
[ 2.960000] hub 3-0:1.0: USB hub found
[ 2.960000] hub 3-0:1.0: 2 ports detected
[ 3.064000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 3.064000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.064000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.064000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 3.064000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[ 3.064000] usb usb4: configuration #1 chosen from 1 choice
[ 3.064000] hub 4-0:1.0: USB hub found
[ 3.064000] hub 4-0:1.0: 2 ports detected
[ 3.288000] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 3.292000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> <7>libata version 2.20 loaded.
[ 3.296000] GSI 23 (level, low) -> IRQ 18
[ 3.300000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.300000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.304000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 3.308000] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.312000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.324000] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xd2304000
[ 3.348000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.368000] usb usb5: configuration #1 chosen from 1 choice
[ 3.388000] hub 5-0:1.0: USB hub found
[ 3.408000] hub 5-0:1.0: 8 ports detected
[ 3.528000] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 3.548000] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 22 (level, low) -> IRQ 21
[ 3.568000] eth0: RTL8169sc/8110sc at 0xe0836800, 00:e0:4c:59:09:f5, IRQ 21
[ 3.592000] ACPI: PCI Interrupt 0000:02:0a.1[A] -> GSI 20 (level, low) -> IRQ 17
[ 3.648000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[d2005000-d20057ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 3.656000] ata_piix 0000:00:1f.2: version 2.10ac1
[ 3.656000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 3.832000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 3.856000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 3.856000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14
[ 3.876000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8 irq 15
[ 3.900000] scsi0 : ata_piix
[ 3.972000] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 4.088000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
[ 4.108000] ata1.00: ATA-8: FUJITSU MHW2080BH, 00000012, max UDMA/100
[ 4.132000] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.164000] ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
[ 4.168000] ata1.00: configured for UDMA/100
[ 4.172000] scsi1 : ata_piix
[ 4.176000] usb 2-2: configuration #1 chosen from 1 choice
[ 4.228000] usbcore: registered new interface driver hiddev
[ 4.248000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
[ 4.252000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2
[ 4.260000] usbcore: registered new interface driver usbhid
[ 4.264000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 4.384000] ATA: abnormal status 0x7F on port 0x00010177
[ 4.404000] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2080B 0000 PQ: 0 ANSI: 5
[ 4.436000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 4.440000] sda: Write Protect is off
[ 4.444000] sda: Mode Sense: 00 3a 00 00
[ 4.444000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.448000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 4.452000] sda: Write Protect is off
[ 4.456000] sda: Mode Sense: 00 3a 00 00
[ 4.456000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.460000] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 4.572000] sd 0:0:0:0: Attached scsi disk sda
[ 4.580000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.928000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[590038564141f509]
[ 5.056000] Attempting manual resume
[ 5.080000] swsusp: Resume From Partition 8:7
[ 5.080000] PM: Checking swsusp image.
[ 5.080000] PM: Resume from disk failed.
[ 5.164000] kjournald starting. Commit interval 5 seconds
[ 5.164000] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.904000] r8169: eth0: link down
[ 15.064000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 15.072000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.076000] Linux agpgart interface v0.102 (c) Dave Jones
[ 15.080000] agpgart: Detected an Intel 945GM Chipset.
[ 15.124000] iTCO_vendor_support: vendor-support=0
[ 15.124000] agpgart: AGP aperture is 256M @ 0x0
[ 15.128000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 15.152000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 15.176000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 15.264000] Yenta: CardBus bridge found at 0000:02:0a.0 [1991:6022]
[ 15.284000] Yenta: Enabling burst memory read transactions
[ 15.308000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 15.332000] Yenta: Routing CardBus interrupts to PCI
[ 15.352000] Yenta TI: socket 0000:02:0a.0, mfunc 0x016a1b22, devctl 0x66
[ 15.452000] NET: Registered protocol family 17
[ 15.464000] intel_rng: FWH not detected
[ 15.608000] nvidia: module license 'NVIDIA' taints kernel.
[ 15.636000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 17
[ 15.656000] Socket status: 30000820
[ 15.676000] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
[ 15.700000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 15.720000] cs: IO port probe 0x2000-0x2fff: clean.
[ 15.740000] pcmcia: parent PCI bridge Memory window: 0xd2000000 - 0xd20fffff
[ 15.764000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x35ffffff
[ 15.784000] ACPI: PCI Interrupt 0000:02:0a.2[A] -> GSI 20 (level, low) -> IRQ 17
[ 15.948000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 15.952000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 15.952000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov 9 17:38:10 PST 2006
[ 16.120000] input: ImPS/2 Logitech Wheel Mouse as /class/input/input3
[ 16.288000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[ 16.296000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 16.560000] pccard: CardBus card inserted into slot 0
[ 16.632000] cs: IO port probe 0x100-0x3af: clean.
[ 16.640000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 16.644000] cs: IO port probe 0x820-0x8ff: clean.
[ 16.648000] cs: IO port probe 0xc00-0xcf7: clean.
[ 16.652000] cs: IO port probe 0xa00-0xaff: clean.
[ 17.264000] ALSA /usr/alsa-driver-1.0.14-4.06a/pci/hda/../../alsa-kernel/pci/hda/patch_si3054.c:244: si3054: cannot initialize. EXT MID = 0000
[ 17.428000] fuse init (API version 7.8)
[ 17.488000] lp: driver loaded but no devices found
[ 17.560000] Adding 979924k swap on /dev/disk/by-uuid/923766ba-5afc-4213-9ee5-4135320bf858. Priority:-1 extents:1 across:979924k
[ 17.776000] EXT3 FS on sda5, internal journal
[ 26.236000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 26.300000] NTFS volume version 3.1.
[ 30.076000] ndiswrapper version 1.45 loaded (smp=yes)
[ 30.144000] ndiswrapper: driver mrv8335 (TP-LINK,07/01/2005,3.2.0.7) loaded
[ 30.144000] PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
[ 30.144000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 20 (level, low) -> IRQ 17
[ 30.144000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 30.144000] ndiswrapper: using IRQ 17
[ 30.412000] wlan0: ethernet device 00:19:e0:85:4e:ff using NDIS driver: mrv8335, version: 0x3010004, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 11AB:1FAA.5.conf
[ 30.412000] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 30.412000] usbcore: registered new interface driver ndiswrapper
[ 38.484000] NET: Registered protocol family 10
[ 38.484000] lo: Disabled Privacy Extensions
[ 38.484000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 48.648000] wlan0: no IPv6 routers present
[ 162.656000] ACPI: AC Adapter [AC0] (on-line)
[ 162.672000] input: Power Button (FF) as /class/input/input4
[ 162.672000] ACPI: Power Button (FF) [PWRF]
[ 162.672000] input: Lid Switch as /class/input/input5
[ 162.672000] ACPI: Lid Switch [LID0]
[ 162.672000] input: Power Button (CM) as /class/input/input6
[ 162.672000] ACPI: Power Button (CM) [PWRB]
[ 162.672000] input: Sleep Button (CM) as /class/input/input7
[ 162.672000] ACPI: Sleep Button (CM) [SLPB]
[ 162.872000] ACPI: Battery Slot [BAT0] (battery present)
[ 162.912000] ACPI: Video Device [PEGD] (multi-head: yes rom: no post: no)
[ 162.912000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 162.948000] ibm_acpi: ec object not found
[ 163.004000] Using specific hotkey driver
[ 163.084000] No dock devices found.
[ 163.136000] wmi_add device=de4fdc00
[ 163.136000] calling WQBA
[ 163.148000] pcc_acpi: loading...
[ 171.608000] ppdev: user-space parallel port driver
[ 172.808000] apm: BIOS not found.
[ 172.980000] Bluetooth: Core ver 2.11
[ 172.980000] NET: Registered protocol family 31
[ 172.980000] Bluetooth: HCI device and connection manager initialized
[ 172.980000] Bluetooth: HCI socket layer initialized
[ 172.984000] Bluetooth: L2CAP ver 2.8
[ 172.984000] Bluetooth: L2CAP socket layer initialized
[ 173.112000] Bluetooth: RFCOMM socket layer initialized
[ 173.112000] Bluetooth: RFCOMM TTY layer initialized
[ 173.112000] Bluetooth: RFCOMM ver 1.8


页首
 用户资料  
 
11 楼 
 文章标题 :
帖子发表于 : 2007-09-15 4:44 

注册: 2006-06-26 15:37
帖子: 22
送出感谢: 0 次
接收感谢: 0 次
高手过来帮忙看看吧!


页首
 用户资料  
 
12 楼 
 文章标题 :
帖子发表于 : 2007-09-16 13:16 

注册: 2006-06-26 15:37
帖子: 22
送出感谢: 0 次
接收感谢: 0 次
终于找到原因了,过来分享一下,说不定下次有人会遇到同样的情况。
原因是显卡散热的不好导致无法进入X。看来ubuntu7.04对笔记本的支持还有待提高啊!温度很高的情况下,风扇竟然都不转的!


页首
 用户资料  
 
13 楼 
 文章标题 :
帖子发表于 : 2007-09-16 13:30 

注册: 2007-09-08 19:01
帖子: 48
送出感谢: 0 次
接收感谢: 0 次
笔记本的显卡是被动散热的。
如果风扇停转,是很恐怖的事情,cpu都会报销。看到笔记本的做工不同了。

我用的asus的z99jn,它的风扇是主板智能控制的,30度以下才会停转,只有在开机的到桌面的很短一段时间才停转,之后就一直运转的。

楼主的这个问题提醒我们要注意风扇啊。

另外,也许laptop/linux下的nvidia的显卡,估计不要超频,反而我还想降速呢。

还有,
引用:
[ 23.191967] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.


看来ubuntu已经给内核打了补丁,可以支持自己修改acpi的dsdt,这个倒是不错。


最后由 leoc 编辑于 2007-09-16 13:35,总共编辑了 1 次

页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 13 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 5 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译