[问题]Linux不认我的Combo!

声卡/显卡/打印机/USB设备等硬件问题(网卡问题请发上面的网卡板块)
回复
darksheen
帖子: 85
注册时间: 2007-03-24 15:21
送出感谢: 0
接收感谢: 0

[问题]Linux不认我的Combo!

#1

帖子 darksheen » 2007-10-13 21:18

我的Combo是三星的TS-L462D,内核是2.6.22.9-91.fc7 #1 SMP Thu Sep 27 23:10:59 EDT 2007 i686 i686 i386 GNU/Linux

症状:系统完全不认我的Combo,就像没有这个设备一样,光盘放到光驱里,系统完全没有反应。dmesg里也没有任何光驱的信息,只认出了硬盘。我的硬盘是SATA的,Combo应该是PATA的。

我试着重新编译了内核,把ATA、SCSI方面的驱动都装上了,但还是不行!
有谁知道怎么解决这个问题么?没光驱的日子比较难过啊!

附:
1.开机dmesg中相关信息:
scsi0 : ata_piix
scsi1 : ata_piix
usb 5-6: configuration #1 chosen from 1 choice
ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8 irq 15
ata1.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC70P, max UDMA/100
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SBDO PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
usb 4-1: new low speed USB device using uhci_hcd and address 2
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk

2.cdrecord -scanbus的输出信息:
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.

3./dev目录的内容:
adsp MAKEDEV ram10 stderr tty31 tty59 vcs
audio mapper ram11 stdin tty32 tty6 vcs1
bus mem ram12 stdout tty33 tty60 vcs2
console mixer ram13 systty tty34 tty61 vcs3
core net ram14 tty tty35 tty62 vcs4
disk null ram15 tty0 tty36 tty63 vcs5
dsp nvidia0 ram2 tty1 tty37 tty7 vcs6
fb nvidia1 ram3 tty10 tty38 tty8 vcs7
fb0 nvidia2 ram4 tty11 tty39 tty9 vcs8
fd nvidia3 ram5 tty12 tty4 ttyS0 vcsa
full nvidia4 ram6 tty13 tty40 ttyS1 vcsa1
fuse nvidia5 ram7 tty14 tty41 ttyS2 vcsa2
fw0 nvidia6 ram8 tty15 tty42 ttyS3 vcsa3
hpet nvidia7 ram9 tty16 tty43 urandom vcsa4
initctl nvidia8 ramdisk tty17 tty44 usbdev1.1_ep00 vcsa5
input nvidia9 random tty18 tty45 usbdev1.1_ep81 vcsa6
kmsg nvidiactl root tty19 tty46 usbdev2.1_ep00 vcsa7
log nvram rtc tty2 tty47 usbdev2.1_ep81 vcsa8
loop0 oldmem sda tty20 tty48 usbdev3.1_ep00 vmmon
loop1 parport0 sda1 tty21 tty49 usbdev3.1_ep81 vmnet0
loop2 parport1 sda2 tty22 tty5 usbdev4.1_ep00 vmnet1
loop3 parport2 sda3 tty23 tty50 usbdev4.1_ep81 vmnet8
loop4 parport3 sda4 tty24 tty51 usbdev4.2_ep00 watchdog
loop5 port sda5 tty25 tty52 usbdev4.2_ep81 X0R
loop6 ppp sequencer tty26 tty53 usbdev5.1_ep00 XOR
loop7 ptmx sequencer2 tty27 tty54 usbdev5.1_ep81 zero
lp0 pts sg0 tty28 tty55 usbdev5.2_ep00
lp1 ram shm tty29 tty56 usbdev5.2_ep02
lp2 ram0 snapshot tty3 tty57 usbdev5.2_ep03
lp3 ram1 snd tty30 tty58 usbdev5.2_ep81
头像
ken085
帖子: 2447
注册时间: 2007-08-09 15:11
送出感谢: 0
接收感谢: 0

#2

帖子 ken085 » 2007-10-14 21:15

换个发行版试试?比如说ubuntu~~~~~
XRRC VG FVZCYR & FGHCVQ!
回复

回到 “常用硬件支持”