当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 16 篇帖子 ]  前往页数 1, 2  下一页
作者 内容
1 楼 
 文章标题 : 升级到7.10了USB闪盘就不好使了!
帖子发表于 : 2007-11-14 20:49 
头像

注册: 2007-08-20 21:39
帖子: 1109
地址: 沈阳
送出感谢: 0 次
接收感谢: 0 次
把U盘插上在 计算机里 出现一个 USB的图标 q名字叫ChipsBnk Flash Disk 右健点时有挂载项 但是挂载不上啊!!


上GOOGLe也没有查出个所以然来 !!

在论坛上找了一下 发现有这个问题的人也很多!


_________________
失恋的痛苦不在于失恋本身 在于青黄不接!
青黄不接的年代里 我把爱情暂放一边!

★★○●◎◇★☆☆★


页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2007-11-16 18:52 
头像

注册: 2007-08-20 21:39
帖子: 1109
地址: 沈阳
送出感谢: 0 次
接收感谢: 0 次
难道没有人知道?大家都用USB好使么???我郁闷了 我用USB其它的是好使的 我用的是笔记本!


_________________
失恋的痛苦不在于失恋本身 在于青黄不接!
青黄不接的年代里 我把爱情暂放一边!

★★○●◎◇★☆☆★


页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2007-11-16 19:21 
头像

注册: 2007-08-20 21:39
帖子: 1109
地址: 沈阳
送出感谢: 0 次
接收感谢: 0 次
加上一些图!


附件:
Screenshot-gnome-mount.png
Screenshot-gnome-mount.png [ 9.68 KiB | 被浏览 3852 次 ]
Screenshot-ChipsBnk Flash Disk Properties.png
Screenshot-ChipsBnk Flash Disk Properties.png [ 32.64 KiB | 被浏览 3243 次 ]



_________________
失恋的痛苦不在于失恋本身 在于青黄不接!
青黄不接的年代里 我把爱情暂放一边!

★★○●◎◇★☆☆★
页首
 用户资料  
 
4 楼 
 文章标题 :
帖子发表于 : 2007-11-16 19:22 
头像

注册: 2007-08-20 21:39
帖子: 1109
地址: 沈阳
送出感谢: 0 次
接收感谢: 0 次
还有这几个!

主等明白人帮看看了!


附件:
Screenshot-Computer - File Browser.png
Screenshot-Computer - File Browser.png [ 57.9 KiB | 被浏览 3227 次 ]



_________________
失恋的痛苦不在于失恋本身 在于青黄不接!
青黄不接的年代里 我把爱情暂放一边!

★★○●◎◇★☆☆★
页首
 用户资料  
 
5 楼 
 文章标题 :
帖子发表于 : 2007-11-16 19:37 

注册: 2006-04-29 14:54
帖子: 1187
地址: 山东
送出感谢: 0 次
接收感谢: 0 次
你看看你的用户属性里,“自动访问外部存储”勾选了没有。


_________________
学会看置顶帖、精华帖。
学会使用搜索。
常见问题解答和发帖需知


页首
 用户资料  
 
6 楼 
 文章标题 :
帖子发表于 : 2007-11-16 19:58 

注册: 2006-04-29 14:54
帖子: 1187
地址: 山东
送出感谢: 0 次
接收感谢: 0 次
代码:
 grep lisir /etc/group
……
plugdev:x:46:haldaemon,lisir


将上面的lisir换成你的用户名,看看有没有上面这一行显示。如果没有就用命令:
代码:
gpasswd -a 用户名 plugdev


这和在用户与组中勾选“自动访问外部存储设备是”是一样的。

在“系统”──“首选项”──“可移动驱动器和介质”中,勾选“热插拔时挂载可移动驱动器”、“插入时挂载可移动介质”、“插入时浏览可移动介质”。

也可能是gnome-volume-manager 没有自动启动,在系统──“首选项”──“会话”中添加gnome-volume-manager,在里面也许是名叫卷管理器,如果前面没有勾选就直接勾选,没有都没有,就自己添加。

再用sysv-rc-conf看看里面有没有dbus和hal这两项,这两项的runlevel应该默认是2345。


_________________
学会看置顶帖、精华帖。
学会使用搜索。
常见问题解答和发帖需知


最后由 lisir 编辑于 2007-11-17 14:55,总共编辑了 3 次

页首
 用户资料  
 
7 楼 
 文章标题 :
帖子发表于 : 2007-11-16 20:30 
头像

注册: 2005-08-14 21:55
帖子: 58428
地址: 长沙
送出感谢: 4
接收感谢: 272
有硬件问题,都是先提供dmesg的信息。而不是图片。图片看不出东西的。
usb的,同时看下lsusb信息。


_________________
● 鸣学


页首
 用户资料  
 
8 楼 
 文章标题 :
帖子发表于 : 2007-11-17 8:51 

注册: 2007-06-29 23:06
帖子: 16
送出感谢: 0 次
接收感谢: 0 次
我的 也是这种情况,dmesg信息如下:
代码:
 2007 (Ubuntu 2.6.22-14.46-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[    0.000000]  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 511MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f50e0
[    0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   131056
[    0.000000]   HighMem    131056 ->   131056
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   131056
[    0.000000] On node 0 totalpages: 131056
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 991 pages used for memmap
[    0.000000]   Normal zone: 125969 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP signature @ 0xC00F6A60 checksum 0
[    0.000000] ACPI: RSDP 000F6A60, 0014 (r0 GBT   )
[    0.000000] ACPI: RSDT 1FFF3040, 0030 (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
[    0.000000] ACPI: FACP 1FFF30C0, 0074 (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
[    0.000000] ACPI: DSDT 1FFF3180, 3992 (r1 GBT    AWRDACPI     1000 MSFT  100000C)
[    0.000000] ACPI: FACS 1FFF0000, 0040
[    0.000000] ACPI: MCFG 1FFF6C80, 003C (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
[    0.000000] ACPI: APIC 1FFF6B80, 0084 (r1 GBT    AWRDACPI 42302E31 AWRD  1010101)
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:4 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:b0000000)
[    0.000000] Built 1 zonelists.  Total pages: 130033
[    0.000000] Kernel command line: root=UUID=a3813dc8-895f-420e-9e9d-4972d5176769 ro quiet splash
[    0.000000] mapped APIC to ffffd000 (fee00000)
[    0.000000] mapped IOAPIC to ffffc000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] Detected 2679.762 MHz processor.
[   16.915525] Console: colour VGA+ 80x25
[   16.915732] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[   16.915933] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[   16.924395] Memory: 508044k/524224k available (2015k kernel code, 15612k reserved, 916k data, 364k init, 0k highmem)
[   16.924406] virtual kernel memory layout:
[   16.924407]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[   16.924409]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   16.924410]     vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
[   16.924411]     lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
[   16.924412]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
[   16.924413]       .data : 0xc02f7d26 - 0xc03dce84   ( 916 kB)
[   16.924415]       .text : 0xc0100000 - 0xc02f7d26   (2015 kB)
[   16.924418] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   16.924458] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[   17.004453] Calibrating delay using timer specific routine.. 5364.48 BogoMIPS (lpj=10728966)
[   17.004478] Security Framework v1.0.0 initialized
[   17.004482] SELinux:  Disabled at boot.
[   17.004495] Mount-cache hash table entries: 512
[   17.004621] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000000
[   17.004630] monitor/mwait feature present.
[   17.004633] using mwait in idle threads.
[   17.004640] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   17.004643] CPU: L2 cache: 1024K
[   17.004645] CPU: Hyper-Threading is disabled
[   17.004648] CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000651d 00000000 00000000
[   17.004658] Compat vDSO mapped to ffffe000.
[   17.004674] Checking 'hlt' instruction... OK.
[   17.020545] SMP alternatives: switching to UP code
[   17.020701] Freeing SMP alternatives: 11k freed
[   17.020991] Early unpacking initramfs... done
[   17.340937] ACPI: Core revision 20070126
[   17.340993] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   17.428788] CPU0: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 01
[   17.428829] Total of 1 processors activated (5364.48 BogoMIPS).
[   17.428982] ENABLING IO-APIC IRQs
[   17.429162] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   17.576305] Brought up 1 CPUs
[   17.576420] Booting paravirtualized kernel on bare hardware
[   17.576487] Time:  8:03:16  Date: 10/17/107
[   17.576509] NET: Registered protocol family 16
[   17.576599] EISA bus registered
[   17.576613] ACPI: bus type pci registered
[   17.583508] PCI: PCI BIOS revision 3.00 entry at 0xfb0d0, last bus=2
[   17.583511] PCI: Using configuration type 1
[   17.583513] Setting up standard PCI resources
[   17.584900] ACPI: EC: Look up EC in DSDT
[   17.588782] ACPI: Interpreter enabled
[   17.588786] ACPI: (supports S0 S1 S4 S5)
[   17.588809] ACPI: Using IOAPIC for interrupt routing
[   17.594579] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   17.594587] PCI: Probing PCI hardware (bus 00)
[   17.595140] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[   17.595145] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[   17.595661] PCI: Transparent bridge - 0000:00:1e.0
[   17.595703] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   17.595861] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[   17.603200] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[   17.603309] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
[   17.603414] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[   17.603519] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[   17.603624] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[   17.603730] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[   17.603834] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[   17.603939] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[   17.604042] Linux Plug and Play Support v0.97 (c) Adam Belay
[   17.604054] pnp: PnP ACPI init
[   17.604063] ACPI: bus type pnp registered
[   17.607134] pnp: PnP ACPI: found 14 devices
[   17.607138] ACPI: ACPI bus type pnp unregistered
[   17.607144] PnPBIOS: Disabled by ACPI PNP
[   17.607193] PCI: Using ACPI for IRQ routing
[   17.607197] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   17.625002] NET: Registered protocol family 8
[   17.625005] NET: Registered protocol family 20
[   17.625077] pnp: 00:0b: ioport range 0x400-0x4bf could not be reserved
[   17.625084] pnp: 00:0c: iomem range 0xd0000000-0xdfffffff could not be reserved
[   17.625090] pnp: 00:0d: iomem range 0xcd000-0xcffff has been reserved
[   17.625093] pnp: 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
[   17.625096] pnp: 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
[   17.625099] pnp: 00:0d: iomem range 0xfc000-0xfffff could not be reserved
[   17.628255] Time: tsc clocksource has been installed.
[   17.655437] PCI: Bridge: 0000:00:01.0
[   17.655441]   IO window: 8000-8fff
[   17.655446]   MEM window: e8000000-e9ffffff
[   17.655450]   PREFETCH window: e0000000-e7ffffff
[   17.655455] PCI: Bridge: 0000:00:1e.0
[   17.655458]   IO window: 9000-afff
[   17.655464]   MEM window: ea000000-ebffffff
[   17.655468]   PREFETCH window: 30000000-300fffff
[   17.655489] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   17.655495] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   17.655507] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   17.655519] NET: Registered protocol family 2
[   17.692266] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   17.692304] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[   17.692425] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[   17.692495] TCP: Hash tables configured (established 16384 bind 16384)
[   17.692498] TCP reno registered
[   17.704361] checking if image is initramfs... it is
[   18.156088] Switched to high resolution mode on CPU 0
[   18.331456] Freeing initrd memory: 7241k freed
[   18.331912] audit: initializing netlink socket (disabled)
[   18.331928] audit(1195286596.016:1): initialized
[   18.334201] VFS: Disk quotas dquot_6.5.1
[   18.334255] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   18.334350] io scheduler noop registered
[   18.334353] io scheduler anticipatory registered
[   18.334355] io scheduler deadline registered
[   18.334372] io scheduler cfq registered (default)
[   18.334459] Boot video device is 0000:01:00.0
[   18.334542] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   18.334590] assign_interrupt_mode Found MSI capability
[   18.334593] Allocate Port Service[0000:00:01.0:pcie00]
[   18.334755] isapnp: Scanning for PnP cards...
[   18.686652] isapnp: No Plug & Play device found
[   18.713438] Real Time Clock Driver v1.12ac
[   18.713540] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   18.713640] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   18.713801] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   18.714408] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   18.714676] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   18.715461] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   18.715666] input: Macintosh mouse button emulation as /class/input/input0
[   18.715756] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   18.719187] serio: i8042 KBD port at 0x60,0x64 irq 1
[   18.719194] serio: i8042 AUX port at 0x60,0x64 irq 12
[   18.719395] mice: PS/2 mouse device common for all mice
[   18.719522] EISA: Probing bus 0 at eisa.0
[   18.719551] Cannot allocate resource for EISA slot 8
[   18.719553] EISA: Detected 0 cards.
[   18.719639] TCP cubic registered
[   18.719651] NET: Registered protocol family 1
[   18.719675] Using IPI No-Shortcut mode
[   18.719826]   Magic number: 15:666:68
[   18.720269] Freeing unused kernel memory: 364k freed
[   18.759881] input: AT Translated Set 2 keyboard as /class/input/input1
[   19.916321] AppArmor: AppArmor initialized<5>audit(1195286597.516:2):  type=1505 info="AppArmor initialized" pid=1203
[   20.004378] fuse init (API version 7.8)
[   20.009122] Failure registering capabilities with primary security module.
[   20.027842] ACPI: Processor [CPU0] (supports 2 throttling states)
[   20.027858] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[   20.027871] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[   20.027882] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[   20.508245] usbcore: registered new interface driver usbfs
[   20.508274] usbcore: registered new interface driver hub
[   20.508298] usbcore: registered new device driver usb
[   20.509178] USB Universal Host Controller Interface driver v3.0
[   20.509243] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 17
[   20.509256] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   20.509260] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   20.509427] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   20.509457] uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000bc00
[   20.509579] usb usb1: configuration #1 chosen from 1 choice
[   20.509615] hub 1-0:1.0: USB hub found
[   20.509621] hub 1-0:1.0: 2 ports detected
[   20.611283] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
[   20.611297] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   20.611301] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   20.611331] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   20.611363] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000b000
[   20.611471] usb usb2: configuration #1 chosen from 1 choice
[   20.611503] hub 2-0:1.0: USB hub found
[   20.611510] hub 2-0:1.0: 2 ports detected
[   20.630808] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   20.630813] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   20.714512] SCSI subsystem initialized
[   20.715296] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[   20.715309] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   20.715314] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   20.715341] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   20.715371] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000b400
[   20.715486] usb usb3: configuration #1 chosen from 1 choice
[   20.715517] hub 3-0:1.0: USB hub found
[   20.715525] hub 3-0:1.0: 2 ports detected
[   20.720979] libata version 2.21 loaded.
[   20.819218] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[   20.819233] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   20.819237] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   20.819269] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   20.819301] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800
[   20.819408] usb usb4: configuration #1 chosen from 1 choice
[   20.819440] hub 4-0:1.0: USB hub found
[   20.819447] hub 4-0:1.0: 2 ports detected
[   20.924030] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17
[   20.924046] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   20.924050] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   20.924085] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   20.924120] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[   20.924129] ehci_hcd 0000:00:1d.7: irq 17, io mem 0xec000000
[   20.928029] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   20.928125] usb usb5: configuration #1 chosen from 1 choice
[   20.928158] hub 5-0:1.0: USB hub found
[   20.928167] hub 5-0:1.0: 8 ports detected
[   21.031342] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 21 (level, low) -> IRQ 20
[   21.031384] skge 1.11 addr 0xeb000000 irq 20 chip Yukon-Lite rev 9
[   21.031517] skge eth0: addr 00:14:85:c2:6b:df
[   21.031707] VP_IDE: IDE controller at PCI slot 0000:02:06.0
[   21.031725] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 22 (level, low) -> IRQ 21
[   21.031735] VP_IDE: chipset revision 6
[   21.031749] VP_IDE: VIA vt6410 (rev 06) IDE UDMA133 controller on pci0000:02:06.0
[   21.031752] VP_IDE: 100% native mode on irq 21
[   21.031759]     ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:pio, hdb:pio
[   21.031769]     ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:pio, hdd:pio
[   21.031779] Probing IDE interface ide0...
[   21.598758] Probing IDE interface ide1...
[   22.169342] ata_piix 0000:00:1f.2: version 2.11
[   22.169349] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[   22.169378] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
[   22.169417] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   22.169502] scsi0 : ata_piix
[   22.169695] scsi1 : ata_piix
[   22.169922] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
[   22.169926] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
[   22.532591] ata1.00: Host Protected Area detected:
[   22.532593]  current size: 156295279 sectors
[   22.532595]  native size: 156301488 sectors
[   22.599120] ata1.00: native size increased to 156301488 sectors
[   22.599127] ata1.00: ATA-7: ST3808110AS, 2AAA, max UDMA/133
[   22.599131] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   22.724090] ata1.00: configured for UDMA/133
[   23.042454] ata2.00: ATAPI: DVDROM GO-D1600B, VER 0A16, max UDMA/33
[   23.214387] ata2.00: configured for UDMA/33
[   23.214510] scsi 0:0:0:0: Direct-Access     ATA      ST3808110AS      2AAA PQ: 0 ANSI: 5
[   23.215481] scsi 1:0:0:0: CD-ROM            DVDROM   GO-D1600B        0A16 PQ: 0 ANSI: 5
[   23.230207] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[   23.230231] sd 0:0:0:0: [sda] Write Protect is off
[   23.230234] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   23.230256] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   23.230319] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[   23.230332] sd 0:0:0:0: [sda] Write Protect is off
[   23.230335] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   23.230354] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   23.230359]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[   23.395541] sd 0:0:0:0: [sda] Attached SCSI disk
[   23.399588] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   23.399613] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[   23.416072] sr0: scsi3-mmc drive: 4x/40x cd/rw xa/form2 cdda tray
[   23.416078] Uniform CD-ROM driver Revision: 3.20
[   23.416304] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   23.765655] Attempting manual resume
[   23.765660] swsusp: Resume From Partition 8:9
[   23.765662] PM: Checking swsusp image.
[   23.881466] PM: Resume from disk failed.
[   23.885629] swsusp: Basic memory bitmaps created
[   24.009440] swsusp: Basic memory bitmaps freed
[   24.153339] kjournald starting.  Commit interval 5 seconds
[   24.153351] EXT3-fs: mounted filesystem with ordered data mode.
[   30.532805] skge eth0: enabling interface
[   31.747941] NET: Registered protocol family 10
[   31.748023] lo: Disabled Privacy Extensions
[   31.748067] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   31.918510] Linux agpgart interface v0.102 (c) Dave Jones
[   31.928139] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   31.930104] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   32.304952] intel_rng: FWH not detected
[   32.402374] skge eth0: Link is up at 100 Mbps, full duplex, flow control both
[   32.402581] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   32.672287] iTCO_vendor_support: vendor-support=0
[   32.673280] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[   32.673360] iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0460)
[   32.673407] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   33.091856] input: PC Speaker as /class/input/input2
[   33.269640] parport_pc 00:08: reported by Plug and Play ACPI
[   33.269689] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   33.999562] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[   34.037057] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 22
[   34.037077] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[   34.357895] intel8x0_measure_ac97_clock: measured 54626 usecs
[   34.357899] intel8x0: clocking to 48000
[   35.191651] loop: module loaded
[   35.211160] lp0: using parport0 (interrupt-driven).
[   35.300505] Adding 787144k swap on /dev/sda9.  Priority:-1 extents:1 across:787144k
[   36.260921] EXT3 FS on sda8, internal journal
[   42.794683] eth0: no IPv6 routers present
[   61.293858] No dock devices found.
[   61.953341] input: Power Button (FF) as /class/input/input4
[   61.957508] ACPI: Power Button (FF) [PWRF]
[   61.991753] input: Power Button (CM) as /class/input/input5
[   61.995843] ACPI: Power Button (CM) [PWRB]
[   74.036787] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[   74.036793] apm: overridden by ACPI.
[   74.545861] Failure registering capabilities with primary security module.
[   75.736482] Bluetooth: Core ver 2.11
[   75.736685] NET: Registered protocol family 31
[   75.736688] Bluetooth: HCI device and connection manager initialized
[   75.736692] Bluetooth: HCI socket layer initialized
[   75.765866] Bluetooth: L2CAP ver 2.8
[   75.765872] Bluetooth: L2CAP socket layer initialized
[   75.793258] Bluetooth: RFCOMM socket layer initialized
[   75.793366] Bluetooth: RFCOMM TTY layer initialized
[   75.793370] Bluetooth: RFCOMM ver 1.8
[   83.061960] [drm] Initialized drm 1.1.0 20060810
[   83.068290] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   83.071026] [drm] Initialized radeon 1.27.0 20060524 on minor 0
[   87.168715] [drm] Setting GART location based on new memory map
[   87.169230] [drm] Loading R300 Microcode
[   87.169280] [drm] writeback test succeeded in 1 usecs
[  217.084755] NET: Registered protocol family 17
[  505.094851] usb 5-3: new high speed USB device using ehci_hcd and address 2
[  505.206807] usb 5-3: device descriptor read/64, error -71
[  505.422716] usb 5-3: device descriptor read/64, error -71
[  505.638642] usb 5-3: new high speed USB device using ehci_hcd and address 3
[  505.750602] usb 5-3: device descriptor read/64, error -71
[  505.966510] usb 5-3: device descriptor read/64, error -71
[  506.182428] usb 5-3: new high speed USB device using ehci_hcd and address 4
[  506.590263] usb 5-3: device not accepting address 4, error -71
[  506.702241] usb 5-3: new high speed USB device using ehci_hcd and address 5
[  507.110065] usb 5-3: device not accepting address 5, error -71
[  529.705467] usb 5-3: new high speed USB device using ehci_hcd and address 6
[  529.837808] usb 5-3: configuration #1 chosen from 1 choice
[  530.133760] usbcore: registered new interface driver libusual
[  530.183226] Initializing USB Mass Storage driver...
[  530.184748] scsi2 : SCSI emulation for USB Mass Storage devices
[  530.196861] usb-storage: device found at 6
[  530.196867] usb-storage: waiting for device to settle before scanning
[  530.197103] usbcore: registered new interface driver usb-storage
[  530.197211] USB Mass Storage support registered.
[  535.191449] usb-storage: device scan complete
[  535.191956] scsi 2:0:0:0: Direct-Access     ChipsBnk Flash Disk       2.00 PQ: 0 ANSI: 2
[  535.193677] sd 2:0:0:0: [sdb] 258304 512-byte hardware sectors (132 MB)
[  535.194300] sd 2:0:0:0: [sdb] Write Protect is off
[  535.194304] sd 2:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[  535.194307] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  535.195923] sd 2:0:0:0: [sdb] 258304 512-byte hardware sectors (132 MB)
[  535.196547] sd 2:0:0:0: [sdb] Write Protect is off
[  535.196551] sd 2:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[  535.196553] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  535.196557]  sdb: sdb1
[  535.197586] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[  535.197633] sd 2:0:0:0: Attached scsi generic sg2 type 0
[  756.534510] usb 5-3: USB disconnect, address 6
[  758.978254] usb 5-3: new high speed USB device using ehci_hcd and address 7
[  759.110646] usb 5-3: configuration #1 chosen from 1 choice
[  759.110888] scsi3 : SCSI emulation for USB Mass Storage devices
[  759.111027] usb-storage: device found at 7
[  759.111029] usb-storage: waiting for device to settle before scanning
[  764.108427] usb-storage: device scan complete
[  764.108932] scsi 3:0:0:0: Direct-Access     ChipsBnk Flash Disk       2.00 PQ: 0 ANSI: 2
[  764.110655] sd 3:0:0:0: [sdb] 258304 512-byte hardware sectors (132 MB)
[  764.111279] sd 3:0:0:0: [sdb] Write Protect is off
[  764.111284] sd 3:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[  764.111286] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[  764.112902] sd 3:0:0:0: [sdb] 258304 512-byte hardware sectors (132 MB)
[  764.113527] sd 3:0:0:0: [sdb] Write Protect is off
[  764.113531] sd 3:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[  764.113533] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[  764.113536]  sdb: sdb1
[  764.114561] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[  764.114610] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2015.012688] usb 5-3: USB disconnect, address 7
[ 2016.513599] usb 5-3: new high speed USB device using ehci_hcd and address 8
[ 2016.646265] usb 5-3: configuration #1 chosen from 1 choice
[ 2016.646727] scsi4 : SCSI emulation for USB Mass Storage devices
[ 2016.647214] usb-storage: device found at 8
[ 2016.647223] usb-storage: waiting for device to settle before scanning
[ 2021.643627] usb-storage: device scan complete
[ 2021.644131] scsi 4:0:0:0: Direct-Access     ChipsBnk Flash Disk       2.00 PQ: 0 ANSI: 2
[ 2021.645854] sd 4:0:0:0: [sdb] 258304 512-byte hardware sectors (132 MB)
[ 2021.646478] sd 4:0:0:0: [sdb] Write Protect is off
[ 2021.646482] sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 2021.646485] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2021.647976] sd 4:0:0:0: [sdb] 258304 512-byte hardware sectors (132 MB)
[ 2021.648601] sd 4:0:0:0: [sdb] Write Protect is off
[ 2021.648605] sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 2021.648607] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 2021.648610]  sdb: sdb1
[ 2021.649638] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 2021.649687] sd 4:0:0:0: Attached scsi generic sg2 type 0
高手帮着看看
lsusb 如下:

Bus 005 Device 008: ID 0204:6025
Bus 005 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000


页首
 用户资料  
 
9 楼 
 文章标题 :
帖子发表于 : 2007-11-17 10:45 
头像

注册: 2007-08-20 21:39
帖子: 1109
地址: 沈阳
送出感谢: 0 次
接收感谢: 0 次
如下
代码:
shu@DogFox:~$ dmesg
[    0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f6d3400 (usable)
[    0.000000]  BIOS-e820: 000000007f6d3400 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved)
[    0.000000]  BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[    0.000000] 1142MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 521939) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   521939
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   521939
[    0.000000] On node 0 totalpages: 521939
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2285 pages used for memmap
[    0.000000]   HighMem zone: 290278 pages, LIFO batch:31
[    0.000000] DMI 2.4 present.
[    0.000000] ACPI: RSDP signature @ 0xC00FC1D0 checksum 0
[    0.000000] ACPI: RSDP 000FC1D0, 0014 (r0 DELL  )
[    0.000000] ACPI: RSDT 7F6D39CD, 0040 (r1 DELL    M07     27D70402 ASL        61)
[    0.000000] ACPI: FACP 7F6D4800, 0074 (r1 DELL    M07     27D70402 ASL        61)
[    0.000000] ACPI: DSDT 7F6D5400, 438C (r1 INT430 SYSFexxx     1001 INTL 20050624)
[    0.000000] ACPI: FACS 7F6E3C00, 0040
[    0.000000] ACPI: HPET 7F6D4F00, 0038 (r1 DELL    M07            1 ASL        61)
[    0.000000] ACPI: APIC 7F6D5000, 0068 (r1 DELL    M07     27D70402 ASL        47)
[    0.000000] ACPI: MCFG 7F6D4FC0, 003E (r16 DELL    M07     27D70402 ASL        61)
[    0.000000] ACPI: SLIC 7F6D509C, 0176 (r1 DELL    M07     27D70402 ASL        61)
[    0.000000] ACPI: BOOT 7F6D4BC0, 0028 (r1 DELL    M07     27D70402 ASL        61)
[    0.000000] ACPI: SSDT 7F6D3A0D, 04DC (r1  PmRef    CpuPm     3000 INTL 20050624)
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:15 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 6:15 APIC version 20
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
[    0.000000] Built 1 zonelists.  Total pages: 517862
[    0.000000] Kernel command line: root=UUID=9f425ed1-8071-4bd9-ac95-3d23bc7cbb9a ro quiet splash
[    0.000000] mapped APIC to ffffd000 (fee00000)
[    0.000000] mapped IOAPIC to ffffc000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1997.477 MHz processor.
[    5.723230] Console: colour VGA+ 80x25
[    5.723504] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    5.723776] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    5.793641] Memory: 2058156k/2087756k available (2015k kernel code, 28392k reserved, 916k data, 364k init, 1170252k highmem)
[    5.793648] virtual kernel memory layout:
[    5.793649]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[    5.793650]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    5.793651]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[    5.793652]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[    5.793653]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
[    5.793654]       .data : 0xc02f7d26 - 0xc03dce84   ( 916 kB)
[    5.793655]       .text : 0xc0100000 - 0xc02f7d26   (2015 kB)
[    5.793657] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[    5.793696] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[    5.793827] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    5.793832] hpet0: 3 64-bit timers, 14318180 Hz
[    5.874745] Calibrating delay using timer specific routine.. 3999.10 BogoMIPS (lpj=7998217)
[    5.874766] Security Framework v1.0.0 initialized
[    5.874772] SELinux:  Disabled at boot.
[    5.874784] Mount-cache hash table entries: 512
[    5.874907] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[    5.874913] monitor/mwait feature present.
[    5.874915] using mwait in idle threads.
[    5.874919] CPU: L1 I cache: 32K, L1 D cache: 32K
[    5.874921] CPU: L2 cache: 4096K
[    5.874923] CPU: Physical Processor ID: 0
[    5.874925] CPU: Processor Core ID: 0
[    5.874927] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[    5.874935] Compat vDSO mapped to ffffe000.
[    5.874948] Checking 'hlt' instruction... OK.
[    5.890829] SMP alternatives: switching to UP code
[    5.891236] Early unpacking initramfs... done
[    6.177274] ACPI: Core revision 20070126
[    6.177312] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[    6.179551] CPU0: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
[    6.179566] SMP alternatives: switching to SMP code
[    6.179636] Booting processor 1/1 eip 3000
[    8.006487] Initializing CPU#1
[    8.084680] Calibrating delay using timer specific routine.. 3994.67 BogoMIPS (lpj=7989350)
[    8.084687] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[    8.084691] monitor/mwait feature present.
[    8.084693] CPU: L1 I cache: 32K, L1 D cache: 32K
[    8.084695] CPU: L2 cache: 4096K
[    8.084697] CPU: Physical Processor ID: 0
[    8.084698] CPU: Processor Core ID: 1
[    8.084699] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[    6.270920] CPU1: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
[    6.270940] Total of 2 processors activated (7993.78 BogoMIPS).
[    6.271138] ENABLING IO-APIC IRQs
[    6.271330] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[    6.418092] checking TSC synchronization [CPU#0 -> CPU#1]:
[    6.438075] Measured 3628946652 cycles TSC warp between CPUs, turning off TSC clock.
[    0.516000] Marking TSC unstable due to: check_tsc_sync_source failed.
[    0.520000] Brought up 2 CPUs
[    0.708000] migration_cost=4000
[    0.708000] Booting paravirtualized kernel on bare hardware
[    0.708000] Time:  2:06:30  Date: 10/17/107
[    0.708000] NET: Registered protocol family 16
[    0.708000] EISA bus registered
[    0.708000] ACPI: bus type pci registered
[    0.736000] PCI: PCI BIOS revision 2.10 entry at 0xfb336, last bus=14
[    0.736000] PCI: Using configuration type 1
[    0.736000] Setting up standard PCI resources
[    0.740000] ACPI: EC: Look up EC in DSDT
[    0.744000] ACPI: Interpreter enabled
[    0.744000] ACPI: (supports S0 S3 S4 S5)
[    0.744000] ACPI: Using IOAPIC for interrupt routing
[    0.756000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.756000] PCI: Probing PCI hardware (bus 00)
[    0.756000] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[    0.756000] PCI quirk: region 1080-10bf claimed by ICH6 GPIO
[    0.760000] PCI: Transparent bridge - 0000:00:1e.0
[    0.760000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.760000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[    0.760000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.760000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.760000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.768000] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[    0.768000] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4
[    0.768000] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
[    0.768000] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
[    0.768000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.768000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.768000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[    0.768000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.768000] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.768000] pnp: PnP ACPI init
[    0.768000] ACPI: bus type pnp registered
[    0.792000] pnp: PnP ACPI: found 12 devices
[    0.792000] ACPI: ACPI bus type pnp unregistered
[    0.792000] PnPBIOS: Disabled by ACPI PNP
[    0.792000] PCI: Using ACPI for IRQ routing
[    0.792000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    0.840000] NET: Registered protocol family 8
[    0.840000] NET: Registered protocol family 20
[    0.840000] pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved
[    0.840000] pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
[    0.840000] pnp: 00:00: iomem range 0xc0000-0xcffff could not be reserved
[    0.840000] pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
[    0.840000] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
[    0.840000] pnp: 00:02: ioport range 0x1000-0x1005 has been reserved
[    0.840000] pnp: 00:02: ioport range 0x1008-0x100f has been reserved
[    0.840000] pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
[    0.840000] pnp: 00:03: ioport range 0x1006-0x1007 has been reserved
[    0.840000] pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved
[    0.840000] pnp: 00:03: ioport range 0x1060-0x107f has been reserved
[    0.840000] pnp: 00:03: ioport range 0x1080-0x10bf has been reserved
[    0.840000] pnp: 00:03: ioport range 0x10c0-0x10df has been reserved
[    0.840000] pnp: 00:08: ioport range 0xc80-0xcff could not be reserved
[    0.840000] pnp: 00:08: ioport range 0x910-0x91f has been reserved
[    0.840000] pnp: 00:08: ioport range 0x920-0x92f has been reserved
[    0.840000] pnp: 00:08: ioport range 0xcb0-0xcbf has been reserved
[    0.840000] pnp: 00:08: ioport range 0x930-0x97f has been reserved
[    0.840000] pnp: 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved
[    0.844000] Time: hpet clocksource has been installed.
[    0.844000] Switched to high resolution mode on CPU 0
[    0.844000] Switched to high resolution mode on CPU 1
[    0.872000] PCI: Bridge: 0000:00:1c.0
[    0.872000]   IO window: disabled.
[    0.872000]   MEM window: disabled.
[    0.872000]   PREFETCH window: disabled.
[    0.872000] PCI: Bridge: 0000:00:1c.1
[    0.872000]   IO window: disabled.
[    0.872000]   MEM window: efd00000-efdfffff
[    0.872000]   PREFETCH window: disabled.
[    0.872000] PCI: Bridge: 0000:00:1c.3
[    0.872000]   IO window: d000-dfff
[    0.872000]   MEM window: efa00000-efcfffff
[    0.872000]   PREFETCH window: e0000000-e01fffff
[    0.872000] PCI: Bridge: 0000:00:1e.0
[    0.872000]   IO window: disabled.
[    0.872000]   MEM window: ef900000-ef9fffff
[    0.872000]   PREFETCH window: disabled.
[    0.872000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[    0.872000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.872000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[    0.872000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    0.872000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18
[    0.872000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[    0.872000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    0.872000] NET: Registered protocol family 2
[    0.920000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.920000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[    0.920000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.920000] TCP: Hash tables configured (established 131072 bind 65536)
[    0.920000] TCP reno registered
[    0.936000] checking if image is initramfs... it is
[    1.500000] Freeing initrd memory: 7332k freed
[    1.500000] Simple Boot Flag at 0x79 set to 0x1
[    1.500000] audit: initializing netlink socket (disabled)
[    1.500000] audit(1195265190.344:1): initialized
[    1.500000] highmem bounce pool size: 64 pages
[    1.500000] VFS: Disk quotas dquot_6.5.1
[    1.500000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.500000] io scheduler noop registered
[    1.500000] io scheduler anticipatory registered
[    1.500000] io scheduler deadline registered
[    1.500000] io scheduler cfq registered (default)
[    1.500000] Boot video device is 0000:00:02.0
[    1.500000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    1.500000] assign_interrupt_mode Found MSI capability
[    1.500000] Allocate Port Service[0000:00:1c.0:pcie00]
[    1.500000] Allocate Port Service[0000:00:1c.0:pcie02]
[    1.500000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    1.500000] assign_interrupt_mode Found MSI capability
[    1.500000] Allocate Port Service[0000:00:1c.1:pcie00]
[    1.500000] Allocate Port Service[0000:00:1c.1:pcie02]
[    1.500000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[    1.500000] assign_interrupt_mode Found MSI capability
[    1.500000] Allocate Port Service[0000:00:1c.3:pcie00]
[    1.500000] Allocate Port Service[0000:00:1c.3:pcie02]
[    1.500000] isapnp: Scanning for PnP cards...
[    1.856000] isapnp: No Plug & Play device found
[    1.872000] Real Time Clock Driver v1.12ac
[    1.872000] hpet_resources: 0xfed00000 is busy
[    1.872000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    1.876000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[    1.876000] input: Macintosh mouse button emulation as /class/input/input0
[    1.876000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.876000] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.876000] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.876000] mice: PS/2 mouse device common for all mice
[    1.880000] EISA: Probing bus 0 at eisa.0
[    1.880000] Cannot allocate resource for EISA slot 1
[    1.880000] EISA: Detected 0 cards.
[    1.880000] TCP cubic registered
[    1.880000] NET: Registered protocol family 1
[    1.880000] Using IPI No-Shortcut mode
[    1.880000]   Magic number: 15:580:106
[    1.880000] Freeing unused kernel memory: 364k freed
[    1.880000] input: AT Translated Set 2 keyboard as /class/input/input1
[    3.052000] AppArmor: AppArmor initialized<5>audit(1195265191.844:2):  type=1505 info="AppArmor initialized" pid=1249
[    3.056000] fuse init (API version 7.8)
[    3.060000] Failure registering capabilities with primary security module.
[    3.092000] ACPI: SSDT 7F6D4134, 0244 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
[    3.092000] ACPI: SSDT 7F6D3EE9, 01C6 (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
[    3.092000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    3.092000] ACPI: Processor [CPU0] (supports 8 throttling states)
[    3.092000] ACPI: SSDT 7F6D4378, 00C4 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
[    3.092000] ACPI: SSDT 7F6D40AF, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
[    3.092000] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    3.092000] ACPI: Processor [CPU1] (supports 8 throttling states)
[    3.100000] ACPI: Thermal Zone [THM] (28 C)
[    3.504000] usbcore: registered new interface driver usbfs
[    3.504000] usbcore: registered new interface driver hub
[    3.504000] usbcore: registered new device driver usb
[    3.504000] USB Universal Host Controller Interface driver v3.0
[    3.504000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
[    3.504000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    3.504000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.504000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    3.504000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000bf80
[    3.504000] usb usb1: configuration #1 chosen from 1 choice
[    3.504000] hub 1-0:1.0: USB hub found
[    3.504000] hub 1-0:1.0: 2 ports detected
[    3.540000] SCSI subsystem initialized
[    3.548000] libata version 2.21 loaded.
[    3.608000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20
[    3.608000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    3.608000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.608000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    3.608000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000bf60
[    3.608000] usb usb2: configuration #1 chosen from 1 choice
[    3.608000] hub 2-0:1.0: USB hub found
[    3.608000] hub 2-0:1.0: 2 ports detected
[    3.712000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21
[    3.712000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    3.712000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.712000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    3.712000] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000bf40
[    3.712000] usb usb3: configuration #1 chosen from 1 choice
[    3.712000] hub 3-0:1.0: USB hub found
[    3.712000] hub 3-0:1.0: 2 ports detected
[    3.816000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 22
[    3.816000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[    3.816000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    3.816000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    3.816000] uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000bf20
[    3.816000] usb usb4: configuration #1 chosen from 1 choice
[    3.816000] hub 4-0:1.0: USB hub found
[    3.816000] hub 4-0:1.0: 2 ports detected
[    3.920000] b44.c:v1.01 (Jun 16, 2006)
[    3.920000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[    3.924000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
[    3.924000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    3.924000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.924000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    3.924000] ehci_hcd 0000:00:1d.7: debug port 1
[    3.924000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    3.924000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa80000
[    3.924000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:15:c5:79:29:ed
[    3.928000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.928000] usb usb5: configuration #1 chosen from 1 choice
[    3.928000] hub 5-0:1.0: USB hub found
[    3.928000] hub 5-0:1.0: 8 ports detected
[    4.000000] Clocksource tsc unstable (delta = -340096780 ns)
[    4.032000] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 19 (level, low) -> IRQ 18
[    4.084000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[ef9fd800-ef9fdfff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    4.088000] ata_piix 0000:00:1f.2: version 2.11
[    4.088000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    4.088000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[    4.088000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    4.088000] scsi0 : ata_piix
[    4.088000] scsi1 : ata_piix
[    4.088000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14
[    4.088000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15
[    4.252000] ata1.00: ATA-7: SAMSUNG HM160JI, AD100-12, max UDMA/100
[    4.252000] ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 0/32)
[    4.268000] ata1.00: configured for UDMA/100
[    4.560000] usb 3-2: new low speed USB device using uhci_hcd and address 2
[    4.604000] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L632D, DE04, max UDMA/33
[    4.712000] usb 3-2: configuration #1 chosen from 1 choice
[    4.724000] usbcore: registered new interface driver hiddev
[    4.736000] input: HID 062a:0000 as /class/input/input2
[    4.736000] input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.2-2
[    4.736000] usbcore: registered new interface driver usbhid
[    4.736000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[    4.792000] ata2.00: configured for UDMA/33
[    4.792000] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM160JI  AD10 PQ: 0 ANSI: 5
[    4.808000] scsi 1:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-L632D DE04 PQ: 0 ANSI: 5
[    4.812000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    4.812000] sd 0:0:0:0: [sda] Write Protect is off
[    4.812000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.812000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.812000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    4.812000] sd 0:0:0:0: [sda] Write Protect is off
[    4.812000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.812000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.812000]  sda:<7>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[394fc0001362905c]
[    5.660000]  sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[    5.756000] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.760000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.760000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    5.828000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    5.828000] Uniform CD-ROM driver Revision: 3.20
[    5.828000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    6.160000] Attempting manual resume
[    6.160000] swsusp: Resume From Partition 8:7
[    6.160000] PM: Checking swsusp image.
[    6.164000] PM: Resume from disk failed.
[    6.168000] ReiserFS: sda1: found reiserfs format "3.6" with standard journal
[    6.168000] ReiserFS: sda1: using ordered data mode
[    6.188000] ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[    6.188000] ReiserFS: sda1: checking transaction log (sda1)
[    6.240000] ReiserFS: sda1: Using r5 hash to sort names
[   12.124000] Linux agpgart interface v0.102 (c) Dave Jones
[   12.128000] agpgart: Detected an Intel 945GM Chipset.
[   12.128000] agpgart: Detected 7932K stolen memory.
[   12.144000] agpgart: AGP aperture is 256M @ 0xd0000000
[   12.212000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   12.212000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.240000] intel_rng: FWH not detected
[   12.512000] input: PC Speaker as /class/input/input3
[   12.572000] iTCO_vendor_support: vendor-support=0
[   12.572000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[   12.608000] ieee80211_crypt: registered algorithm 'NULL'
[   12.616000] sdhci: Secure Digital Host Controller Interface driver
[   12.616000] sdhci: Copyright(c) Pierre Ossman
[   12.616000] sdhci: SDHCI controller found at 0000:02:01.1 [1180:0822] (rev 19)
[   12.616000] ACPI: PCI Interrupt 0000:02:01.1[B] -> GSI 18 (level, low) -> IRQ 23
[   12.616000] mmc0: SDHCI at 0xef9fd400 irq 23 DMA
[   12.632000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   12.632000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   12.684000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1
[   12.684000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[   12.684000] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[   12.684000] PCI: Setting latency timer of device 0000:0c:00.0 to 64
[   12.684000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[   12.848000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20
[   12.848000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   12.880000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x180b1, caps: 0xa04713/0x200000
[   12.916000] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[   12.916000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[   12.916000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   14.224000] hda_intel: azx_get_response timeout, switching to polling mode...
[   14.564000] ipw3945: Detected geography ABG (13 802.11bg channels, 4 802.11a channels)
[   14.580000] lp: driver loaded but no devices found
[   14.604000] i8k: not running on a supported Dell system.
[   14.604000] i8k: vendor=Dell Inc., model=MXC061                          , version=A10
[   14.604000] i8k: unable to get SMM BIOS version
[   14.604000] Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org)
[   14.628000] Adding 1983988k swap on /dev/sda7.  Priority:-1 extents:1 across:1983988k
[   48.420000] ReiserFS: sda9: found reiserfs format "3.6" with standard journal
[   48.420000] ReiserFS: sda9: using ordered data mode
[   48.424000] ReiserFS: sda9: journal params: device sda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   48.424000] ReiserFS: sda9: checking transaction log (sda9)
[   48.464000] ReiserFS: sda9: Using r5 hash to sort names
[   48.508000] ReiserFS: sda5: found reiserfs format "3.6" with standard journal
[   48.508000] ReiserFS: sda5: using ordered data mode
[   48.516000] ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   48.516000] ReiserFS: sda5: checking transaction log (sda5)
[   48.548000] ReiserFS: sda5: Using r5 hash to sort names
[   48.596000] ReiserFS: sda6: found reiserfs format "3.6" with standard journal
[   48.596000] ReiserFS: sda6: using ordered data mode
[   48.596000] ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   48.600000] ReiserFS: sda6: checking transaction log (sda6)
[   48.656000] ReiserFS: sda6: Using r5 hash to sort names
[   48.720000] ReiserFS: sda8: found reiserfs format "3.6" with standard journal
[   48.720000] ReiserFS: sda8: using ordered data mode
[   48.728000] ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   48.728000] ReiserFS: sda8: checking transaction log (sda8)
[   48.748000] ReiserFS: sda8: Using r5 hash to sort names
[   51.148000] ACPI: AC Adapter [AC] (on-line)
[   51.156000] No dock devices found.
[   51.200000] input: Lid Switch as /class/input/input5
[   51.200000] ACPI: Lid Switch [LID]
[   51.224000] input: Power Button (CM) as /class/input/input6
[   51.224000] ACPI: Power Button (CM) [PBTN]
[   51.224000] input: Sleep Button (CM) as /class/input/input7
[   51.224000] ACPI: Sleep Button (CM) [SBTN]
[   51.312000] ACPI: Battery Slot [BAT0] (battery present)
[   51.328000] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[   51.328000] ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
[   52.100000] apm: BIOS not found.
[   52.972000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   53.020000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   53.020000] NFSD: starting 90-second grace period
[   54.048000] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[   54.048000] vboxdrv: Successfully done.
[   54.396000] Failure registering capabilities with primary security module.
[   57.608000] [drm] Initialized drm 1.1.0 20060810
[   57.612000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[   57.616000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[   95.944000] NET: Registered protocol family 17
[  108.244000] NET: Registered protocol family 10
[  108.244000] lo: Disabled Privacy Extensions
[  108.244000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  118.468000] eth1: no IPv6 routers present
[ 2367.552000] usb 5-5: new high speed USB device using ehci_hcd and address 3
[ 2367.684000] usb 5-5: configuration #1 chosen from 1 choice
[ 2367.796000] usbcore: registered new interface driver libusual
[ 2367.832000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 2367.832000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 2367.836000] Initializing USB Mass Storage driver...
[ 2367.836000] scsi2 : SCSI emulation for USB Mass Storage devices
[ 2367.836000] usb-storage: device found at 3
[ 2367.836000] usb-storage: waiting for device to settle before scanning
[ 2367.836000] usbcore: registered new interface driver usb-storage
[ 2367.836000] USB Mass Storage support registered.
[ 2372.836000] usb-storage: device scan complete
[ 2372.836000] scsi 2:0:0:0: Direct-Access     ChipsBnk Flash Disk       5.00 PQ: 0 ANSI: 2
[ 2372.836000] sd 2:0:0:0: [sdb] 16384 512-byte hardware sectors (8 MB)
[ 2372.836000] sd 2:0:0:0: [sdb] Write Protect is off
[ 2372.836000] sd 2:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 2372.836000] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 2372.840000] sd 2:0:0:0: [sdb] 16384 512-byte hardware sectors (8 MB)
[ 2372.840000] sd 2:0:0:0: [sdb] Write Protect is off
[ 2372.840000] sd 2:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 2372.840000] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 2372.840000]  sdb: unknown partition table
[ 2372.844000] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 2372.844000] sd 2:0:0:0: Attached scsi generic sg2 type 0


lsusb
代码:
Bus 005 Device 003: ID 0420:1307 Chips and Technologies
Bus 005 Device 001: ID 0000:0000 
Bus 001 Device 001: ID 0000:0000 
Bus 004 Device 001: ID 0000:0000 
Bus 003 Device 002: ID 062a:0000 Creative Labs Optical Mouse
Bus 003 Device 001: ID 0000:0000 
Bus 002 Device 001: ID 0000:0000


_________________
失恋的痛苦不在于失恋本身 在于青黄不接!
青黄不接的年代里 我把爱情暂放一边!

★★○●◎◇★☆☆★


页首
 用户资料  
 
10 楼 
 文章标题 :
帖子发表于 : 2007-11-17 10:46 

注册: 2006-04-29 14:54
帖子: 1187
地址: 山东
送出感谢: 0 次
接收感谢: 0 次
引用:
USB Mass Storage support registered.


看样子,硬件已经识别了?

你先试试手工挂载行不行,就是用mount命令,如果可以了,再看看当前用户是否属于plugdev组,以及负责自动挂载的那两个hal和dbus是否正常。

或者:~$
代码:
lshal --monitor


然后插上U盘,看看是否出现类似下面的显示:

引用:
Start monitoring devicelist:
-------------------------------------------------
10:28:23.914: usb_device_5ac_1300_000A270010336C48 added
10:28:24.006: usb_device_5ac_1300_000A270010336C48_if0 added
10:28:24.016: usb_device_5ac_1300_000A270010336C48_if0 property info.linux.driver = 'usb-storage' (new)
10:28:24.064: usb_device_5ac_1300_000A270010336C48_usbraw added
10:28:29.078: usb_device_5ac_1300_000A270010336C48_if0_scsi_host added
10:28:29.083: usb_device_5ac_1300_000A270010336C48_if0_scsi_host_scsi_device_lun0 added
10:28:29.137: usb_device_5ac_1300_000A270010336C48_if0_scsi_host_scsi_device_lun0_scsi_generic added
10:28:29.298: storage_serial_Apple_iPod_000A270010336C48_0_0 added
10:28:29.372: volume_label_HARRY___IPO added
10:28:29.567: volume_label_HARRY___IPO property volume.mount_point = '/media/HARRY__ IPO'
10:28:29.571: volume_label_HARRY___IPO property volume.is_mounted = true


_________________
学会看置顶帖、精华帖。
学会使用搜索。
常见问题解答和发帖需知


页首
 用户资料  
 
11 楼 
 文章标题 :
帖子发表于 : 2007-11-17 10:52 

注册: 2006-04-29 14:54
帖子: 1187
地址: 山东
送出感谢: 0 次
接收感谢: 0 次
想深入研究,可以看一下http://www.linuxsir.org/bbs/showthread.php?t=157065这篇文章,虽然是fc3的,但原理相同。注意,里面的命令可能不通用。


_________________
学会看置顶帖、精华帖。
学会使用搜索。
常见问题解答和发帖需知


页首
 用户资料  
 
12 楼 
 文章标题 :
帖子发表于 : 2007-11-17 12:13 

注册: 2006-04-29 14:54
帖子: 1187
地址: 山东
送出感谢: 0 次
接收感谢: 0 次
[url]http://www.lowlevel.cz/log/pivot/entry.php?id=95
[/url]
代码:
gconf-editor


看一下/schemas/system/storage/default_options下面有没有vfat,这个下面应该有个键名为mount_options、键值为<schema>的键。如果这里正常,再看一下/usr/share/gconf/schemas/gnome-mount.schemas是否存在。

如果注册表里没有vfat的键,可以用下面的脚本导入:
引用:
export GCONF_CONFIG_SOURCE=`gconftool-2 --get-default-source`
SCHEMAS="gnome-mount.schemas"
for S in $SCHEMAS; do
gconftool-2 --makefile-install-rule /usr/share/gconf/schemas/$S > /dev/null
done


这是我根据上面网址提供的修改了一下,把文件的地址改成Ubuntu下用的了,将上面的脚本内容保存到一个文件中,再用chmod加上执行权限,以root执行该脚本。

试了一下,没有出现问题,但不做保证。


_________________
学会看置顶帖、精华帖。
学会使用搜索。
常见问题解答和发帖需知


页首
 用户资料  
 
13 楼 
 文章标题 :
帖子发表于 : 2007-11-17 12:21 

注册: 2007-11-17 11:53
帖子: 16
送出感谢: 0 次
接收感谢: 0 次
引用:
失恋的痛苦不在于失恋本身 在于青黄不接!
青黄不接的年代里 我把爱情暂放一边!

青黄不接是什么意思?


页首
 用户资料  
 
14 楼 
 文章标题 :
帖子发表于 : 2007-11-17 13:45 

注册: 2006-04-29 14:54
帖子: 1187
地址: 山东
送出感谢: 0 次
接收感谢: 0 次
还有,你没有删除gnome-volume-manager吧?

要自动挂载,需要内核中打开PNP,安装了udev、dbus、hal、gnome-volume-manager(默认都会安装的),且udev、dbus、hal都在启动时默认运行。


_________________
学会看置顶帖、精华帖。
学会使用搜索。
常见问题解答和发帖需知


页首
 用户资料  
 
15 楼 
 文章标题 :
帖子发表于 : 2007-11-19 11:12 
头像

注册: 2007-08-20 21:39
帖子: 1109
地址: 沈阳
送出感谢: 0 次
接收感谢: 0 次
高手 写道:
引用:
失恋的痛苦不在于失恋本身 在于青黄不接!
青黄不接的年代里 我把爱情暂放一边!

青黄不接是什么意思?


青黄不接 就是接不上了 新的还没成熟 旧的又没有了!


_________________
失恋的痛苦不在于失恋本身 在于青黄不接!
青黄不接的年代里 我把爱情暂放一边!

★★○●◎◇★☆☆★


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 16 篇帖子 ]  前往页数 1, 2  下一页

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 4 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译