当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 3 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : 按方法调整刷新律!结果还是不行!急救!!!!
帖子发表于 : 2007-11-16 11:39 
头像

注册: 2007-11-05 1:22
帖子: 45
送出感谢: 0 次
接收感谢: 0 次
使用ubuntu以来总是感觉系统很不稳定!
就拿刷新率来说吧!昨天晚上用的好好的!1024*768 75hz 等我登录出来再进去的时候刷新率只有60了!之前我也没有改动什么阿?
然后泡论坛查看调整方法!
================================
zzyi@zzyi-desktop:~$ sudo ddcprobe | grep monitorrange
monitorrange: 31-70, 55-120
zzyi@zzyi-desktop:~$
================================
得出这个范围!
之后在编辑文件:
================================
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
Identifier "nVidia Corporation NV18 [GeForce4 MX 4000]"
Boardname "nv"
Busid "PCI:1:0:0"
Driver "nvidia"
Screen 0
EndSection

Section "Monitor"
Identifier "NEC FE700+"
Vendorname "NEC"
Modelname "NEC MultiSync FE700"
Horizsync 31.0-70.0
Vertrefresh 55.0-120.0
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
modeline "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
modeline "640x480@85" 36.0 640 696 752 832 480 481 484 509 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
modeline "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
modeline "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
modeline "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline "1024x768@43" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync interlace +vsync
modeline "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
Gamma 1.0
EndSection

Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation NV18 [GeForce4 MX 4000]"
Monitor "NEC FE700+"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1400 1050
Modes "1024x768@85" "1024x768@75" "832x624@75" "1024x768@70" "800x600@60" "1024x768@60" "800x600@85" "1024x768@43" "800x600@75" "1152x864@75" "800x600@72" "1280x960@60" "800x600@56" "1280x1024@60" "640x480@85" "1400x1050@60" "640x480@75" "640x480@72" "640x480@60"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"

# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Module"
Load "glx"
Load "v4l"
EndSection
Section "device" #
Identifier "device1"
Boardname "nv"
Busid "PCI:1:0:0"
Driver "nvidia"
Screen 1
EndSection
Section "screen" #
Identifier "screen1"
Device "device1"
Defaultdepth 24
Monitor "monitor1"
EndSection
Section "monitor" #
Identifier "monitor1"
Gamma 1.0
EndSection
Section "ServerFlags"
EndSection
===============================

Section "Monitor"
Identifier "NEC FE700+"
Vendorname "NEC"
Modelname "NEC MultiSync FE700"
Horizsync 31.0-70.0
Vertrefresh 55.0-120.0
EndSection [这个原来是没有的!是我添加上去的!]
其他的都没有改动过!结果还是不行,分辨率只有两个选择了800*600 640*480。不是我想要的1024*768 75阿!

到底怎么改才能得到我想要得结果呢?请高手指点!
:(


页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2007-11-16 12:26 

注册: 2006-10-10 13:01
帖子: 231
送出感谢: 0 次
接收感谢: 0 次
你写进去了那么多阿?
贴一份我的给你吧 ,我的是ATI的

代码:
Section "Files"
EndSection

Section "InputDevice"
        Identifier      "Generic Keyboard"
        Driver          "kbd"
        Option          "CoreKeyboard"
        Option          "XkbRules"      "xorg"
        Option          "XkbModel"      "pc105"
        Option          "XkbLayout"     "us"
EndSection

Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"        "/dev/input/mice"
        Option          "Protocol"      "ImPS/2"
        Option          "ZAxisMapping"  "4 5"
        Option          "Emulate3Buttons"       "true"
EndSection

Section "InputDevice"
        Driver          "wacom"
        Identifier      "stylus"
        Option          "Device"        "/dev/input/wacom"
        Option          "Type"  "stylus"
        Option          "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
        Driver          "wacom"
        Identifier      "eraser"
        Option          "Device"        "/dev/input/wacom"
        Option          "Type"  "eraser"
        Option          "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
        Driver          "wacom"
        Identifier      "cursor"
        Option          "Device"        "/dev/input/wacom"
        Option          "Type"  "cursor"
        Option          "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
        Identifier      "Generic Video Card"
        Driver          "fglrx"
        Busid           "PCI:1:0:0"
EndSection

Section "Monitor"
        Identifier      "MAYA K75"
        Option          "DPMS"
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Device          "Generic Video Card"
        Monitor         "MAYA K75"
        Defaultdepth    24
        SubSection "Display"
                Modes           "1024x768"
        EndSubSection
EndSection

Section "ServerLayout"
        Identifier      "Default Layout"
  screen "Default Screen"
        Inputdevice     "Generic Keyboard"
        Inputdevice     "Configured Mouse"

        # Uncomment if you have a wacom tablet
        #       InputDevice     "stylus"        "SendCoreEvents"
        #       InputDevice     "cursor"        "SendCoreEvents"
        #       InputDevice     "eraser"        "SendCoreEvents"
EndSection
Section "Module"
        Load            "glx"
EndSection
Section "Extensions"
        Option          "Composite"     "0"
EndSection

[/code]


_________________
努力不一定成功,但放弃注定要失败!
授人与鱼,不如授人与渔!


页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2007-11-16 17:50 
头像

注册: 2007-11-05 1:22
帖子: 45
送出感谢: 0 次
接收感谢: 0 次
有没有人针对我以上的文件帮我修改一下阿!
我总感觉我的显卡的驱动不是很稳定!一不小心,那天开机屏幕就看不下眼!!!
现在我只好将显卡的驱动卸载掉!才好点!


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 3 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 2 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译