[问题]进入ubuntu花屏

声卡/显卡/打印机/USB设备等硬件问题(网卡问题请发上面的网卡板块)
回复
suntoday
帖子: 4
注册时间: 2007-12-31 11:46
送出感谢: 0
接收感谢: 0

[问题]进入ubuntu花屏

#1

帖子 suntoday » 2007-12-31 11:53

在ubuntu更改驱动程序及刷新率后,进入ubuntu严重花屏,根本看不到任何字符及界面,改登录到xfce却完全没有问题,请高手们指教解决的办法。

机器配置:老掉牙的 gf2 mx400 sony E100
:cry:
suntoday
帖子: 4
注册时间: 2007-12-31 11:46
送出感谢: 0
接收感谢: 0

#2

帖子 suntoday » 2007-12-31 11:58

附 Xfce下的 /etc/X11/xorg.conf 文件,供高手们分析。

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by failsafeDexconf, using
# values from the debconf database and some overrides to use vesa mode.
#
# You should use dexconf or another such tool for creating a "real" xorg.conf
# For example:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
EndSection

Section "Module"
Load "glx"
Load "GLcore"
Load "v4l"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "Device"
Identifier "Failsafe Device"
Boardname "vesa"
Busid "PCI:1:0:0"
Driver "vesa"
Screen 0
EndSection

Section "Monitor"
Identifier "Failsafe Monitor"
Vendorname "Plug 'n' Play"
Modelname "Plug 'n' Play"
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
modeline "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
modeline "640x480@85" 36.0 640 696 752 832 480 481 484 509 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
modeline "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
modeline "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
modeline "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline "1024x768@43" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync interlace +vsync
modeline "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
Gamma 1.0
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Failsafe Device"
Monitor "Failsafe Monitor"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1400 1050
Modes "800x600@85" "800x600@60" "800x600@75" "832x624@75" "800x600@72" "1024x768@85" "800x600@56" "1024x768@75" "640x480@85" "1024x768@70" "640x480@75" "1024x768@60" "640x480@72" "1024x768@43" "640x480@60" "1152x864@75" "1280x960@60" "1280x1024@60" "1400x1050@60"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
EndSection
Section "device" #
Identifier "device1"
Boardname "vesa"
Busid "PCI:1:0:0"
Driver "vesa"
Screen 1
EndSection
Section "screen" #
Identifier "screen1"
Device "device1"
Defaultdepth 24
Monitor "monitor1"
EndSection
Section "monitor" #
Identifier "monitor1"
Gamma 1.0
EndSection
Section "ServerFlags"
EndSection
suntoday
帖子: 4
注册时间: 2007-12-31 11:46
送出感谢: 0
接收感谢: 0

#3

帖子 suntoday » 2007-12-31 13:28

:evil: 高手都去睡觉了,没人回答我吗?
头像
Neoriva
帖子: 1163
注册时间: 2007-12-19 21:42
送出感谢: 0
接收感谢: 0

#4

帖子 Neoriva » 2007-12-31 13:49

xubuntu 7.10?怎么安装的显卡驱动?
北極熊都是左撇子…………
suntoday
帖子: 4
注册时间: 2007-12-31 11:46
送出感谢: 0
接收感谢: 0

#5

帖子 suntoday » 2007-12-31 14:02

Neoriva 写了:xubuntu 7.10?怎么安装的显卡驱动?
对,是ubuntu 7.10
在“添加/删除程序”里面安装的,三个NVIDIA的驱动程序都一一先后缷载及安装过,最后一次为了把刷新率改为85,将显示器的型号改为CPD-E200就出问题了。
回复

回到 “常用硬件支持”