当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 10 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : 分辨率问题
帖子发表于 : 2008-03-04 16:38 

注册: 2007-10-29 11:14
帖子: 15
送出感谢: 0 次
接收感谢: 0 次
我的分辨率默认为1044*900我把他调到1024*768重启后又变回来,谁能教我把他定到1024*768不变


页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2008-03-04 16:47 
头像

注册: 2007-02-02 18:14
帖子: 30702
系统: debian sid
送出感谢: 1
接收感谢: 34
编辑/etc/xorg.conf


_________________
醉了星星,醉月亮●●●●●The Long Way To Go(*^_^*)


页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2008-03-04 16:59 

注册: 2007-10-29 11:14
帖子: 15
送出感谢: 0 次
接收感谢: 0 次
能讲得详细点吗?文件没找到。如何编辑?谢谢!


页首
 用户资料  
 
4 楼 
 文章标题 :
帖子发表于 : 2008-03-04 17:06 
头像

注册: 2007-06-13 15:57
帖子: 12565
地址: 在他乡
送出感谢: 50
接收感谢: 87
/etc/X11/xorg.conf
代码:
Section "Screen"
        Identifier      "Default Screen"
        Device          "通用显示卡"
        Monitor         "RM170"
        Defaultdepth    24
        SubSection "Display"
                Depth   24
                Virtual 1280    1024
                Modes           "1280x1024@60"  "1280x960@60"   "1024x768@60"   "800x$
        EndSubSection
EndSection

只保留1024X768的分辩率


页首
 用户资料  
 
5 楼 
 文章标题 :
帖子发表于 : 2008-03-04 17:31 

注册: 2007-10-29 11:14
帖子: 15
送出感谢: 0 次
接收感谢: 0 次
我的文件和你的不一样
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection


页首
 用户资料  
 
6 楼 
 文章标题 :
帖子发表于 : 2008-03-04 18:09 

注册: 2006-02-23 16:04
帖子: 3
送出感谢: 0 次
接收感谢: 0 次
我也是没有分辨率数值,下面xorg.conf全文,但不知在那里修改分辩率
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection

Section "Device"
Identifier "Configured Video Device"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection


页首
 用户资料  
 
7 楼 
 文章标题 :
帖子发表于 : 2008-03-05 21:06 

注册: 2005-11-15 15:04
帖子: 154
送出感谢: 0 次
接收感谢: 0 次
我的也是这样:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection

Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
Option "NoLogo" "True"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
Defaultdepth 24
EndSection
Section "Module"
Load "glx"
EndSection


页首
 用户资料  
 
8 楼 
 文章标题 :
帖子发表于 : 2008-03-07 11:34 

注册: 2006-11-28 21:35
帖子: 65
送出感谢: 0 次
接收感谢: 0 次
我的也差不多一样,没高手说明一下


页首
 用户资料  
 
9 楼 
 文章标题 :
帖子发表于 : 2008-03-07 12:12 

注册: 2007-05-13 23:22
帖子: 68
送出感谢: 0 次
接收感谢: 0 次
呵呵,可能是8.04alpha的问题,等待正是版出来应该就可以了...


页首
 用户资料  
 
10 楼 
 文章标题 :
帖子发表于 : 2008-03-07 12:42 
头像

注册: 2007-02-02 18:14
帖子: 30702
系统: debian sid
送出感谢: 1
接收感谢: 34
我的是g是用那个显卡显示配置程序displayconfig-gtk选合适的显卡 显示器就好了,当然我的nv5200驱动已经装好了,n卡的nvidia-xconfig还有用但是写入xorg.conf的没有分辨率设置的,nvidia-settings默认不安装了,装上以后设置保存不了了,我的xorg.conf,参考一下,displayconfig-gtk nvidia-xconfig两个都用了内容有点重复
引用:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Fri Jan 11 15:05:59 PST 2008

Section "ServerLayout"
Identifier "Layout0"
screen 0 "Screen0" 0 0
Inputdevice "Keyboard0" "CoreKeyboard"
Inputdevice "Mouse0" "CorePointer"
EndSection

Section "Files"
Rgbpath "/usr/X11R6/lib/X11/rgb"
EndSection

Section "Module"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
Load "v4l"
EndSection

Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"
Identifier "Monitor0"
Vendorname "Philips"
Modelname "Philips 107S(17inch/CM6800)"
Horizsync 30.0-66.0
Vertrefresh 50.0-130.0
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
modeline "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
modeline "640x480@85" 36.0 640 696 752 832 480 481 484 509 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
modeline "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
modeline "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline "1024x768@43" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync interlace +vsync
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
Gamma 1.0
EndSection

Section "Device"
Identifier "Device0"
Boardname "NVIDIA GeForce FX (generic)"
Busid "PCI:1:0:0"
Driver "nvidia"
Screen 0
Vendorname "NVIDIA"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1024 768
Modes "1024x768@75" "1024x768@70" "832x624@75" "1024x768@60" "800x600@60" "1024x768@43" "800x600@85" "1280x960@60" "800x600@75" "1280x1024@60" "800x600@72" "1400x1050@60" "800x600@56" "640x480@85" "640x480@75" "640x480@72" "640x480@60"
EndSubSection
EndSection

Section "device" #
Identifier "device1"
Boardname "NVIDIA GeForce FX (generic)"
Busid "PCI:1:0:0"
Driver "nvidia"
Screen 1
Vendorname "NVIDIA"
EndSection
Section "screen" #
Identifier "screen1"
Device "device1"
Defaultdepth 24
Monitor "monitor1"
EndSection
Section "monitor" #
Identifier "monitor1"
Gamma 1.0
EndSection
Section "ServerFlags"
EndSection


_________________
醉了星星,醉月亮●●●●●The Long Way To Go(*^_^*)


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 10 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 4 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译