[问题]挂起后无法重新连接xsupplicant

为当前最终发行版之前的所有版本提供支持
回复
rucstudent
帖子: 633
注册时间: 2007-05-09 16:52
送出感谢: 1 次
接收感谢: 0

[问题]挂起后无法重新连接xsupplicant

#1

帖子 rucstudent » 2008-04-29 11:19

我是教育网,用xsupplicant拨号认证
如果有事要出去,我会让笔记本挂起
在7.10下面,我只要
右键--勾选掉“启用网络”
然后右键--“启用网络”然后执行sudo xsupplicant -i eth0就可以再次拨号上网
可是在8.04下面,执行sudo xsupplicant -i eth0以后,提示:
lanpeng@lanpeng-laptop:~$ xsupplicant -i eth0
Using default config!
network_list: all
Default network: "default"
Startup command: "echo "some command""
First_Auth command: "dhclient %i"
Reauth command: "echo "authenticated user %i""
Logfile: "/var/log/xsupplicant.log"
Allow Types: ALL
ID: "2006*******"
tls user cert: "/path/to/certificate"
tls user key: "/path/to/private/key"
tls user pass: "password for key"
tls root_cert: "/path/to/root/cert"
tls root_dir: "/path/to/valid/root/certs"
tls chunk: 1398
tls rand: "/path/to/random/source"
md5 username: "2006******"
md5 password: "******"
ttls root_cert: "/path/to/root/certificate"
ttls chunk: 1398
ttls rand: "/path/to/random/source"
ttls phase2_type 'pap'
pap username: "papuser"
pap password: "pappasswd"
chap username: "chapuser"
chap password: "chappasswd"
mschap username: "mschapuser"
mschap password: "mschappasswd"
mschapv2 username: "mschapv2user"
mschapv2 password: "mschapv2passwd"
leap username: "leapuser"
leap password: "leapuserpass!"
mschapv2 username: "eapmschapv2user"
mschapv2 password: "eapmschapv2userpass!"
peap user cert: "/path/to/certificate"
peap root_dir: "/path/to/root/certificate/dir"
peap crl_dir: "/path/to/dir/with/crl"
peap user key: "/path/to/private/key"
peap user pass: "password for key"
peap chunk: 1398
peap rand: "/path/to/random/source"
peap CN check : "myradius.radius.com"
match CN exactly : "yes"
Session Resumption = YES
PEAP Allow Types: ALL
mschapv2 username: "phase2mschapv2"
mschapv2 password: "phase2mschapv2pass"
sim username: "simuser"
sim password: "simuserpass!"
sim auto_realm: "yes"
Type: Wired
SSID: "mvemjsnp"
Allow Types: ALL
ID: "Check this out- any char!#$"
SSID: "up to 32 character ASCII string"
ID: "testuser@testnet.com"
Allow Type: TLS
Type: Wireless
SSID: "foo-network!"
Type: Wired
ID: "this will work too"
Couldn't initialize raw socket for interface eth0!
Couldn't initalize!!!!

为什么无法初始化?每次挂起后我都要重启.......
很烦恼+痛苦,原来7.10可以的,到04就不行了~
回复

回到 “老旧版本支持”