[问题]大家帮忙修改下 xorg的文件 谢谢了

为当前最终发行版之前的所有版本提供支持
回复
头像
er18
帖子: 72
注册时间: 2008-04-29 16:35
来自: hubei
送出感谢: 0
接收感谢: 0
联系:

[问题]大家帮忙修改下 xorg的文件 谢谢了

#1

帖子 er18 » 2008-05-04 18:39

我的CRT是方正的 水平扫描 30-70HZ 垂直扫描是50-120Hz 最高分辨率1280*1024 逐行 最佳使用模式 1024x768 85Hz 视频带宽180Mhz 我想工作在124x768@85hz下

根据下面这个修改过得xorg怎么改动下?

代码: 全选

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection

Section "Device"
Identifier "Configured Video Device"
Boardname "Intel 945"
Busid "PCI:0:2:0"
Driver "intel"
Screen 0
Vendorname "Intel"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
Vendorname "HPC"
Modelname "CA776"
Horizsync 31.0-72.0
Vertrefresh 50.0-150.0
modeline "640x480@85" 36.0 640 696 752 832 480 481 484 509 -vsync -hsync
modeline "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
modeline "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
Gamma 1.0
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1024 768
Modes "1024x768@85" "800x600@85" "640x480@85"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
EndSection
Section "Module"
Load "glx"
Load "GLcore"
Load "dri"
Load "v4l"
EndSection
Section "ServerFlags"
EndSection 
头像
XEUY
帖子: 247
注册时间: 2007-08-20 8:13
送出感谢: 0
接收感谢: 0
联系:

#2

帖子 XEUY » 2008-05-04 23:24

已经好了吧。。。。
在桌面上右键设置行么?
每天都在起步。。。如同起床
头像
er18
帖子: 72
注册时间: 2008-04-29 16:35
来自: hubei
送出感谢: 0
接收感谢: 0
联系:

#3

帖子 er18 » 2008-05-05 4:27

哈哈 真的好了耶 ls的MM真漂亮 多谢了

sudo gedit /etc/X11/xorg.conf

代码: 全选

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection

Section "Device"
Identifier "Configured Video Device"
Boardname "Intel 945"
Busid "PCI:0:2:0"
Driver "intel"
Screen 0
Vendorname "Intel"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
Vendorname "HPC"
Modelname "CA776"
Horizsync 30.0-70.0
Vertrefresh 50.0-120.0
modeline "640x480@85" 36.0 640 696 752 832 480 481 484 509 -vsync -hsync
modeline "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
modeline "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
Gamma 1.0
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1024 768
Modes "1024x768@85" "800x600@85" "640x480@85"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
EndSection
Section "Module"
Load "glx"
Load "GLcore"
Load "dri"
Load "v4l"
EndSection
Section "ServerFlags"
EndSection 
回复

回到 “老旧版本支持”