[问题]终于安装的差不多了,但是显示器的对比度不对,怎样调整对比度呢?

为当前最终发行版之前的所有版本提供支持
回复
iseeyou
帖子: 7
注册时间: 2008-05-14 17:12
送出感谢: 0
接收感谢: 0

[问题]终于安装的差不多了,但是显示器的对比度不对,怎样调整对比度呢?

#1

帖子 iseeyou » 2008-05-25 1:55

我的显卡是NF6,驱动已经安装好了,但是颜色不对,对比度太高了,如何调整呢?
liuboadsl
帖子: 113
注册时间: 2006-08-17 6:10
送出感谢: 0
接收感谢: 0

#2

帖子 liuboadsl » 2008-05-25 5:53

wiki 发帖前请认真阅读
iseeyou
帖子: 7
注册时间: 2008-05-14 17:12
送出感谢: 0
接收感谢: 0

#3

帖子 iseeyou » 2008-05-25 5:59

:( 我找不到调整对比度才来问的
iseeyou
帖子: 7
注册时间: 2008-05-14 17:12
送出感谢: 0
接收感谢: 0

#4

帖子 iseeyou » 2008-05-25 18:19

代码: 全选

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by failsafeDexconf, using
# values from the debconf database and some overrides to use vesa mode.
#
# You should use dexconf or another such tool for creating a "real" xorg.conf
# For example:
#   sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"cn"
	Option		"XkbOptions"	"lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
EndSection

Section "Device"
	Identifier	"Configured Video Device"
	Boardname	"NVIDIA GeForce 6800 (generic)"
	Busid		"PCI:1:0:0"
	Driver		"nvidia"
	Screen	0
	Vendorname	"NVIDIA"
	Option		"NoLogo"	"True"
EndSection

Section "Monitor"
	Identifier	"Configured Monitor"
	Vendorname	"Generic LCD Display"
	Modelname	"LCD Panel 1280x1024"
	Horizsync	31.5-64.0
	Vertrefresh	56.0	-	65.0
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
	Gamma	1.0
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Configured Video Device"
	Monitor		"Configured Monitor"
	Defaultdepth	24
	SubSection "Display"
		Depth	24
		Virtual	1280	1024
		Modes		"1280x1024@60"	"1280x960@60"	"1024x768@60"	"800x600@60"	"800x600@56"	"640x480@60"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
  screen 0 "Default Screen" 0 0
EndSection
Section "Module"
	Load		"glx"
	Load		"v4l"
EndSection
Section "device" #  
	Identifier	"device1"
	Boardname	"NVIDIA GeForce 6800 (generic)"
	Busid		"PCI:1:0:0"
	Driver		"nv"
	Screen	1
	Vendorname	"NVIDIA"
EndSection
Section "screen" #  
	Identifier	"screen1"
	Device		"device1"
	Defaultdepth	24
	Monitor		"monitor1"
EndSection
Section "monitor" #  
	Identifier	"monitor1"
	Gamma	1.0
EndSection
Section "ServerFlags"
EndSection
调整颜色深度是设置那个Depth?还有 应该设置多少呢?
头像
BigSnake.NET
帖子: 12522
注册时间: 2006-07-02 11:16
来自: 廣州
送出感谢: 0
接收感谢: 7 次
联系:

#5

帖子 BigSnake.NET » 2008-05-25 18:21

nvidia-setting
^_^ ~~~
要理解递归,首先要理解递归。

地球人都知道,理论上,理论跟实际是没有差别的,但实际上,理论跟实际的差别是相当大滴。
回复

回到 “老旧版本支持”