当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 10 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : [问题]无线网卡问题
帖子发表于 : 2008-08-06 21:43 

注册: 2008-02-12 19:09
帖子: 134
送出感谢: 0 次
接收感谢: 0 次
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:84 errors:0 dropped:0 overruns:0 frame:0
TX packets:84 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4200 (4.1 KB) TX bytes:4200 (4.1 KB)

qingwen shangmian de shi wo wuxian wangka de xinxi ma ?
zhongwen shuru hai mei zhuanghao ,yumen


最后由 hj_545 编辑于 2008-08-07 10:47,总共编辑了 1 次

页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2008-08-06 22:15 
头像

注册: 2006-09-02 14:18
帖子: 5308
地址: 汉桑城
送出感谢: 1
接收感谢: 1
:shock:


_________________
全世界linux爱好者联合起来 !
一切闭源操作系统都是纸老虎 !
要斗私批修,拒绝黑屏,使用linux !
让一部分人先用起Archlinux来 !
linux是第一生产力 !
讲正气,讲开源,讲free
要坚定不移的走开源的道路 !
linux明天会更好 !

dpkg -l |grep ^rc|awk '{print $2}' |tr ["\n"] [" "]|sudo xargs dpkg -P -
ubuntu粉丝群 26660836 已满员


页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2008-08-06 22:29 
头像

注册: 2007-06-04 9:54
帖子: 173
地址: 南京
送出感谢: 0 次
接收感谢: 0 次
引用:
lo Link encap:Local Loopback


本地回环,很明显不是你的无线网卡!

已经装好驱动的无线网卡可以用iwconfig查看;
查看内核识别的网络接口信息用dmesg | grep -in eth;
还没被内核识别的可以试试lspci,在输出的信息里找找。


_________________
等待青春散场;等待年华老去!


页首
 用户资料  
 
4 楼 
 文章标题 :
帖子发表于 : 2008-08-07 10:49 

注册: 2008-02-12 19:09
帖子: 134
送出感谢: 0 次
接收感谢: 0 次
下了个dvd版本的8。04,终于默认有中文输入法了!呵呵!
我查看的信息能帮我看看吗?我不会看哦!
我看我的无线网卡因该是没装好的了,请问怎么装阿?型号能在下面的信息里找到吗?
00:00.0 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation MCP67 ISA Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP67 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
00:01.3 Co-processor: nVidia Corporation MCP67 Co-processor (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:04.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:04.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP67 IDE Controller (rev a1)
00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
00:08.0 PCI bridge: nVidia Corporation MCP67 PCI Bridge (rev a2)
00:09.0 SATA controller: nVidia Corporation MCP67 SATA Controller (rev a2)
00:0a.0 Ethernet controller: nVidia Corporation MCP67 Ethernet (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:0c.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:0e.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
01:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
01:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
01:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
01:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)
02:00.0 VGA compatible controller: nVidia Corporation GeForce 8400M G (rev a1)
07:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)


dmesg | grep -in eth
352:[ 19.633814] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
356:[ 20.161560] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:24:d2:0c:59
357:[ 20.161566] forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3
397:[ 23.198558] Driver 'sd' needs updating - please use bus_type methods
449:[ 33.061953] Driver 'sr' needs updating - please use bus_type methods
487:[ 41.605302] eth0: no link during initialization.
500:[ 55.062512] ADDRCONF(NETDEV_UP): eth0: link is not ready
514:[ 119.200094] eth0: link up.
515:[ 119.202160] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
516:[ 119.235807] eth0: link down.
518:[ 172.252436] eth0: link up.
519:[ 172.254363] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
520:[ 172.352622] eth0: link down.
521:[ 198.938013] eth0: link up.
522:[ 198.939821] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
523:[ 210.010262] eth0: no IPv6 routers present


页首
 用户资料  
 
5 楼 
 文章标题 :
帖子发表于 : 2008-08-07 10:57 
头像

注册: 2006-01-18 12:55
帖子: 1347
地址: 也许真的没有人理解
送出感谢: 0 次
接收感谢: 1
型号:
Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)


_________________
MacBook Pro 15" User
Cocoa Programmer


页首
 用户资料  
 
6 楼 
 文章标题 :
帖子发表于 : 2008-08-07 11:03 

注册: 2008-02-12 19:09
帖子: 134
送出感谢: 0 次
接收感谢: 0 次
JangMunho 写道:
型号:
Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)

那要怎么安装阿?不会阿!


页首
 用户资料  
 
7 楼 
 文章标题 :
帖子发表于 : 2008-08-07 11:07 
头像

注册: 2006-01-18 12:55
帖子: 1347
地址: 也许真的没有人理解
送出感谢: 0 次
接收感谢: 1
我没这型号的卡,你去Google一下吧……


_________________
MacBook Pro 15" User
Cocoa Programmer


页首
 用户资料  
 
8 楼 
 文章标题 :
帖子发表于 : 2008-08-07 11:13 

注册: 2008-02-12 19:09
帖子: 134
送出感谢: 0 次
接收感谢: 0 次
网上找到FEDORA安装的方法,对吗?UBUNTU能用马?
Last week I helped a friend configure wireless driver on his brand new HP Compaq Notebook PC. Fedora 9 X86_64 did not detect the wireless device automatically.

The first thing I did was list all PCI devices on the laptop PC.
lspci

At the end of the output I noticed
03:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)

MadWifi provides Linux kernel drivers for wireless LAN devices with Atheros chipsets. Therefore my next task was to install MadWifi on the notebook PC. Before installing the kernel drivers it is recommended to update all the packages on the computer, especially the kernel. I updated all the packages.

rpm.livna.org repository for Fedora contains the MadWifi rpm. I enabled the rpm.livna.org repository on the laptop and installed the MadWifi rpm using
yum install kmod-madwifi

and restarted the computer. The wireless device was not detected. I also tried aliasing wifi0 and ath0 to ath_pci. Nothing solved the problem. I uninstalled kmod-madwifi and recompiled madwifi. At this point system-config-network detected the hardware device as "other wireless device". But I could not connect to the Wifi network.

After researching for a while on the Internet, I noticed many people had difficulty obtaining the proper driver for Atheros AR242x wireless chipset on 64 bit Linux. My next best available option was to use Fedora 9 i386 on the laptop PC. I tried the rpm.livna.org MadWifi rpm again. It failed once again. I removed kmod-madwifi and rpm.livna.org and recompied madwifi.

These are the steps that actually worked. I launched the terminal and switched to super user mode using su -. The remaining steps are documented below.

Step 1. Download the latest madwifi snapshot from madwifi.org.
wget http://snapshots.madwifi.org/special/ma ... 007.tar.gz

Step 2: Extract the tarball and change directory
tar -zxvf madwifi-ng-r3366+ar5007.tar.gz

Step 3: Change directory
cd madwifi-ng-r3366+ar5007

Step 4: Install the necessary tools to compile madwifi.
yum install gcc kernel-devel kernel-headers make

Step 5: make

Step 6: make install

Step 7: Restart the computer

Step 8: Configure the network using either system-config-network or NetworkManager

I could see the ath5k and ath_pci modules in the Linux Kernel using lsmod.

$lsmod | grep ath

dm_multipath 18056 0
dm_mod 49236 2 dm_mirror,dm_multipath
ath5k 110344 0
mac80211 181992 1 ath5k
cfg80211 25096 2 ath5k,mac80211
ath_rate_sample 15104 1
ath_pci 162092 0
wlan 206008 5 wlan_wep,wlan_scan_sta,ath_rate_sample,ath_pci
ath_hal 281184 3 ath_rate_sample,ath_pci

If you follow the same steps and do not see the ath_pci kernel module, try
modprobe ath_pci

and restart the computer.

You may also try
modprobe ath5k

and restart the computer.


页首
 用户资料  
 
9 楼 
 文章标题 :
帖子发表于 : 2008-08-07 21:16 
头像

注册: 2006-01-18 12:55
帖子: 1347
地址: 也许真的没有人理解
送出感谢: 0 次
接收感谢: 1
你只需要把这一句
yum install gcc kernel-devel kernel-headers make
变成:
sudo apt-get install build-essential
就行了。

去新立德搜一下对应内核版本的devel装了没有,没有给它装上。
提示:uname -r可以查看内核版本。


_________________
MacBook Pro 15" User
Cocoa Programmer


页首
 用户资料  
 
10 楼 
 文章标题 :
帖子发表于 : 2008-08-07 21:35 

注册: 2008-02-12 19:09
帖子: 134
送出感谢: 0 次
接收感谢: 0 次
去新立德搜一下对应内核版本的devel装了没有,没有给它装上。
对应内核的DEVE不懂阿!


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 10 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 5 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译