当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 15 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : 请教问题:usb移动硬盘不能识别
帖子发表于 : 2008-08-24 16:08 
头像

注册: 2006-12-29 20:13
帖子: 694
送出感谢: 0 次
接收感谢: 0 次
我用的机子是苹果ibook g3,系统gutsy for ppc,移动硬盘是fat32格式的,插上后移动硬盘灯亮,也就是物理连接上了,但/dev里根本找不到设备,/dev/hda是我的硬盘,/dev/hdb是光驱。
还没试u盘能不能识别。
引用:
houleihl@hl:/dev$ ls
adb ptyc9 ptyrd ptyx1 tty19 ttybf ttyr3 ttyw7
agpgart ptyca ptyre ptyx2 tty2 ttyc0 ttyr4 ttyw8
apm_bios ptycb ptyrf ptyx3 tty20 ttyc1 ttyr5 ttyw9
audio ptycc ptys0 ptyx4 tty21 ttyc2 ttyr6 ttywa
bus ptycd ptys1 ptyx5 tty22 ttyc3 ttyr7 ttywb
cdrom ptyce ptys2 ptyx6 tty23 ttyc4 ttyr8 ttywc
console ptycf ptys3 ptyx7 tty24 ttyc5 ttyr9 ttywd
core ptyd0 ptys4 ptyx8 tty25 ttyc6 ttyra ttywe
disk ptyd1 ptys5 ptyx9 tty26 ttyc7 ttyrb ttywf
dsp ptyd2 ptys6 ptyxa tty27 ttyc8 ttyrc ttyx0
fb0 ptyd3 ptys7 ptyxb tty28 ttyc9 ttyrd ttyx1
fd ptyd4 ptys8 ptyxc tty29 ttyca ttyre ttyx2
full ptyd5 ptys9 ptyxd tty3 ttycb ttyrf ttyx3
fuse ptyd6 ptysa ptyxe tty30 ttycc ttys0 ttyx4
hda ptyd7 ptysb ptyxf tty31 ttycd ttys1 ttyx5
hda1 ptyd8 ptysc ptyy0 tty32 ttyce ttys2 ttyx6
hda2 ptyd9 ptysd ptyy1 tty33 ttycf ttys3 ttyx7
hda3 ptyda ptyse ptyy2 tty34 ttyd0 ttys4 ttyx8
hda4 ptydb ptysf ptyy3 tty35 ttyd1 ttys5 ttyx9
hdb ptydc ptyt0 ptyy4 tty36 ttyd2 ttys6 ttyxa
initctl ptydd ptyt1 ptyy5 tty37 ttyd3 ttys7 ttyxb
input ptyde ptyt2 ptyy6 tty38 ttyd4 ttys8 ttyxc
kmem ptydf ptyt3 ptyy7 tty39 ttyd5 ttys9 ttyxd
kmsg ptye0 ptyt4 ptyy8 tty4 ttyd6 ttysa ttyxe
libmtp-usbdev1.1 ptye1 ptyt5 ptyy9 tty40 ttyd7 ttysb ttyxf
libmtp-usbdev2.1 ptye2 ptyt6 ptyya tty41 ttyd8 ttysc ttyy0
libmtp-usbdev2.2 ptye3 ptyt7 ptyyb tty42 ttyd9 ttysd ttyy1
log ptye4 ptyt8 ptyyc tty43 ttyda ttyse ttyy2
loop ptye5 ptyt9 ptyyd tty44 ttydb ttysf ttyy3
lvm ptye6 ptyta ptyye tty45 ttydc ttyt0 ttyy4
MAKEDEV ptye7 ptytb ptyyf tty46 ttydd ttyt1 ttyy5
mapper ptye8 ptytc ptyz0 tty47 ttyde ttyt2 ttyy6
mem ptye9 ptytd ptyz1 tty48 ttydf ttyt3 ttyy7
mixer ptyea ptyte ptyz2 tty49 ttye0 ttyt4 ttyy8
net ptyeb ptytf ptyz3 tty5 ttye1 ttyt5 ttyy9
null ptyec ptyu0 ptyz4 tty50 ttye2 ttyt6 ttyya
nvram ptyed ptyu1 ptyz5 tty51 ttye3 ttyt7 ttyyb
pmu ptyee ptyu2 ptyz6 tty52 ttye4 ttyt8 ttyyc
port ptyef ptyu3 ptyz7 tty53 ttye5 ttyt9 ttyyd
ppp ptyp0 ptyu4 ptyz8 tty54 ttye6 ttyta ttyye
psaux ptyp1 ptyu5 ptyz9 tty55 ttye7 ttytb ttyyf
ptmx ptyp2 ptyu6 ptyza tty56 ttye8 ttytc ttyz0
pts ptyp3 ptyu7 ptyzb tty57 ttye9 ttytd ttyz1
ptya0 ptyp4 ptyu8 ptyzc tty58 ttyea ttyte ttyz2
ptya1 ptyp5 ptyu9 ptyzd tty59 ttyeb ttytf ttyz3
ptya2 ptyp6 ptyua ptyze tty6 ttyec ttyu0 ttyz4
ptya3 ptyp7 ptyub ptyzf tty60 ttyed ttyu1 ttyz5
ptya4 ptyp8 ptyuc ram0 tty61 ttyee ttyu2 ttyz6
ptya5 ptyp9 ptyud ram1 tty62 ttyef ttyu3 ttyz7
ptya6 ptypa ptyue ram10 tty63 ttyp0 ttyu4 ttyz8
ptya7 ptypb ptyuf ram11 tty7 ttyp1 ttyu5 ttyz9
ptya8 ptypc ptyv0 ram12 tty8 ttyp2 ttyu6 ttyza
ptya9 ptypd ptyv1 ram13 tty9 ttyp3 ttyu7 ttyzb
ptyaa ptype ptyv2 ram14 ttya0 ttyp4 ttyu8 ttyzc
ptyab ptypf ptyv3 ram15 ttya1 ttyp5 ttyu9 ttyzd
ptyac ptyq0 ptyv4 ram2 ttya2 ttyp6 ttyua ttyze
ptyad ptyq1 ptyv5 ram3 ttya3 ttyp7 ttyub ttyzf
ptyae ptyq2 ptyv6 ram4 ttya4 ttyp8 ttyuc urandom
ptyaf ptyq3 ptyv7 ram5 ttya5 ttyp9 ttyud vcs
ptyb0 ptyq4 ptyv8 ram6 ttya6 ttypa ttyue vcs1
ptyb1 ptyq5 ptyv9 ram7 ttya7 ttypb ttyuf vcs2
ptyb2 ptyq6 ptyva ram8 ttya8 ttypc ttyv0 vcs3
ptyb3 ptyq7 ptyvb ram9 ttya9 ttypd ttyv1 vcs4
ptyb4 ptyq8 ptyvc random ttyaa ttype ttyv2 vcs5
ptyb5 ptyq9 ptyvd sequencer ttyab ttypf ttyv3 vcs6
ptyb6 ptyqa ptyve sequencer2 ttyac ttyq0 ttyv4 vcs7
ptyb7 ptyqb ptyvf shm ttyad ttyq1 ttyv5 vcs8
ptyb8 ptyqc ptyw0 snd ttyae ttyq2 ttyv6 vcs9
ptyb9 ptyqd ptyw1 sndstat ttyaf ttyq3 ttyv7 vcsa
ptyba ptyqe ptyw2 stderr ttyb0 ttyq4 ttyv8 vcsa1
ptybb ptyqf ptyw3 stdin ttyb1 ttyq5 ttyv9 vcsa2
ptybc ptyr0 ptyw4 stdout ttyb2 ttyq6 ttyva vcsa3
ptybd ptyr1 ptyw5 tty ttyb3 ttyq7 ttyvb vcsa4
ptybe ptyr2 ptyw6 tty0 ttyb4 ttyq8 ttyvc vcsa5
ptybf ptyr3 ptyw7 tty1 ttyb5 ttyq9 ttyvd vcsa6
ptyc0 ptyr4 ptyw8 tty10 ttyb6 ttyqa ttyve vcsa7
ptyc1 ptyr5 ptyw9 tty11 ttyb7 ttyqb ttyvf vcsa8
ptyc2 ptyr6 ptywa tty12 ttyb8 ttyqc ttyw0 vcsa9
ptyc3 ptyr7 ptywb tty13 ttyb9 ttyqd ttyw1 xconsole
ptyc4 ptyr8 ptywc tty14 ttyba ttyqe ttyw2 zero
ptyc5 ptyr9 ptywd tty15 ttybb ttyqf ttyw3
ptyc6 ptyra ptywe tty16 ttybc ttyr0 ttyw4
ptyc7 ptyrb ptywf tty17 ttybd ttyr1 ttyw5
ptyc8 ptyrc ptyx0 tty18 ttybe ttyr2 ttyw6


_________________
在学习linux的道路上自在而行。


页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2008-08-24 16:16 
头像

注册: 2008-04-02 15:36
帖子: 724
地址: O_O
送出感谢: 0 次
接收感谢: 0 次
x羡慕啊~
为什么不sudo fdisk -l


_________________
^o^ && O_O && ^_^
One World|One Dream|One Piece
愛 ^_^ 這個 美麗的世界O_O

本公司专治各种不服、不爽、谩骂、挑衅。


页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2008-08-24 16:19 
头像

注册: 2007-11-05 19:26
帖子: 635
送出感谢: 0 次
接收感谢: 0 次
多数情况是由于供电不足造成的,个人理解。可以换一根短点的连接线上台式机上试试


页首
 用户资料  
 
4 楼 
 文章标题 :
帖子发表于 : 2008-08-24 16:19 
头像

注册: 2007-10-21 18:36
帖子: 3235
地址: 汕头/广东/中国
送出感谢: 2
接收感谢: 3
什么牌的移动硬盘?借鉴下,最近还想买个,别买到无法识别的。


_________________
老子的哲学是“”,庄子的哲学是“
人有一技在身,则逍遥游而无不为


页首
 用户资料  
 
5 楼 
 文章标题 :
帖子发表于 : 2008-08-24 16:22 
头像

注册: 2006-12-29 20:13
帖子: 694
送出感谢: 0 次
接收感谢: 0 次
引用:
houleihl@hl:/dev$ sudo fdisk -l
/dev/hda
# type name length base ( size ) system
/dev/hda1 Apple_partition_map Apple 63 @ 1 ( 31.5k) Partition map
/dev/hda2 Apple_Bootstrap untitled 1954 @ 64 (977.0k) NewWorld bootblock
/dev/hda3 Apple_UNIX_SVR2 untitled 18763672 @ 2018 ( 8.9G) Linux native
/dev/hda4 Apple_UNIX_SVR2 swap 875190 @ 18765690 (427.3M) Linux swap

Block size=512, Number of Blocks=19640880
DeviceType=0x0, DeviceId=0x0
Drivers-
1: @ 64 for 23, type=0x1
2: @ 118 for 36, type=0xffff
3: @ 192 for 21, type=0x701
4: @ 246 for 34, type=0xf8ff


_________________
在学习linux的道路上自在而行。


页首
 用户资料  
 
6 楼 
 文章标题 :
帖子发表于 : 2008-08-24 16:24 
头像

注册: 2006-12-29 20:13
帖子: 694
送出感谢: 0 次
接收感谢: 0 次
CLOCKWORKHEART 写道:
多数情况是由于供电不足造成的,个人理解。可以换一根短点的连接线上台式机上试试
。。台式机我试过,当然可以,我这个硬盘主要就是给我的ibook用的……郁闷了
富士通的盘加的盒子


_________________
在学习linux的道路上自在而行。


页首
 用户资料  
 
7 楼 
 文章标题 :
帖子发表于 : 2008-08-24 16:29 
头像

注册: 2008-04-02 15:36
帖子: 724
地址: O_O
送出感谢: 0 次
接收感谢: 0 次
fallleaf 写道:
引用:
houleihl@hl:/dev$ sudo fdisk -l
/dev/hda
# type name length base ( size ) system
/dev/hda1 Apple_partition_map Apple 63 @ 1 ( 31.5k) Partition map
/dev/hda2 Apple_Bootstrap untitled 1954 @ 64 (977.0k) NewWorld bootblock
/dev/hda3 Apple_UNIX_SVR2 untitled 18763672 @ 2018 ( 8.9G) Linux native
/dev/hda4 Apple_UNIX_SVR2 swap 875190 @ 18765690 (427.3M) Linux swap

Block size=512, Number of Blocks=19640880
DeviceType=0x0, DeviceId=0x0
Drivers-
1: @ 64 for 23, type=0x1
2: @ 118 for 36, type=0xffff
3: @ 192 for 21, type=0x701
4: @ 246 for 34, type=0xf8ff


就是嘛,这多清楚,插到装有XP的台式机子的后面的USB接口上(直联主板上的USB接口,供电足。)
磁盘扫描修复文件系统。试试PQ等分区软件。咨询APPLE服务部。


_________________
^o^ && O_O && ^_^
One World|One Dream|One Piece
愛 ^_^ 這個 美麗的世界O_O

本公司专治各种不服、不爽、谩骂、挑衅。


页首
 用户资料  
 
8 楼 
 文章标题 :
帖子发表于 : 2008-08-24 16:36 
头像

注册: 2006-12-29 20:13
帖子: 694
送出感谢: 0 次
接收感谢: 0 次
sinyadvan 写道:
fallleaf 写道:
引用:
houleihl@hl:/dev$ sudo fdisk -l
/dev/hda
# type name length base ( size ) system
/dev/hda1 Apple_partition_map Apple 63 @ 1 ( 31.5k) Partition map
/dev/hda2 Apple_Bootstrap untitled 1954 @ 64 (977.0k) NewWorld bootblock
/dev/hda3 Apple_UNIX_SVR2 untitled 18763672 @ 2018 ( 8.9G) Linux native
/dev/hda4 Apple_UNIX_SVR2 swap 875190 @ 18765690 (427.3M) Linux swap

Block size=512, Number of Blocks=19640880
DeviceType=0x0, DeviceId=0x0
Drivers-
1: @ 64 for 23, type=0x1
2: @ 118 for 36, type=0xffff
3: @ 192 for 21, type=0x701
4: @ 246 for 34, type=0xf8ff


就是嘛,这多清楚,插到装有XP的台式机子的后面的USB接口上(直联主板上的USB接口,供电足。)
磁盘扫描修复文件系统。试试PQ等分区软件。咨询APPLE服务部。
:em25 :em25 :em25 :em25
台式机没问题,但我就是想在本子上用…… :cry:
盘扫描过的,至于apple服务部就算了,这是二手买来的,出厂时间2002年,都是淘汰品了,羡慕什么……


_________________
在学习linux的道路上自在而行。


最后由 fallleaf 编辑于 2008-08-24 16:45,总共编辑了 1 次

页首
 用户资料  
 
9 楼 
 文章标题 :
帖子发表于 : 2008-08-24 16:40 
头像

注册: 2005-08-14 21:55
帖子: 58428
地址: 长沙
送出感谢: 4
接收感谢: 272
dmesg看了吗。这才是你第一步需要看的信息啊。


_________________
● 鸣学


页首
 用户资料  
 
10 楼 
 文章标题 :
帖子发表于 : 2008-08-24 16:44 
头像

注册: 2006-12-29 20:13
帖子: 694
送出感谢: 0 次
接收感谢: 0 次
引用:
[ 0.000000] Total memory = 320MB; using 1024kB for hash table (at cff00000)
[ 0.000000] Linux version 2.6.15-52-powerpc (buildd@royal) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 Fri Jul 11 13:22:30 UTC 2008
[ 0.000000] Found initrd at 0xc1900000:0xc20aa000
[ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xc0
[ 0.000000] Mapped at 0xfdfc0000
[ 0.000000] Found a Pangea mac-io controller, rev: 0, mapped at 0xfdf40000
[ 0.000000] Processor NAP mode on idle enabled.
[ 0.000000] PowerMac motherboard: iBook FireWire
[ 0.000000] Found UniNorth PCI host bridge at 0xf0000000. Firmware bus number: 0->0
[ 0.000000] Found UniNorth PCI host bridge at 0xf2000000. Firmware bus number: 0->0
[ 0.000000] Found UniNorth PCI host bridge at 0xf4000000. Firmware bus number: 0->0
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver 2 initialized for Core99, firmware: 0c
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=2335, gen1=2336
[ 0.000000] nvram: Active bank is: 1
[ 0.000000] nvram: OF partition at 0x210
[ 0.000000] nvram: XP partition at 0x1a30
[ 0.000000] nvram: NR partition at 0x1b30
[ 0.000000] Top of RAM: 0x14000000, Total RAM: 0x14000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] On node 0 totalpages: 81920
[ 0.000000] DMA zone: 81920 pages, LIFO batch:15
[ 0.000000] DMA32 zone: 0 pages, LIFO batch:0
[ 0.000000] Normal zone: 0 pages, LIFO batch:0
[ 0.000000] HighMem zone: 0 pages, LIFO batch:0
[ 0.000000] Built 1 zonelists
[ 0.000000] Kernel command line: root=/dev/hda3 ro quiet splash
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
[ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[ 0.000000] mpic: Initializing for 64 sources
[ 0.000000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[ 0.000000] GMT Delta read from XPRAM: 480 minutes, DST: off
[ 0.000000] time_init: decrementer frequency = 16.640000 MHz
[ 0.000000] time_init: processor frequency = 499.999995 MHz
[ 29.184903] Console: colour dummy device 80x25
[ 29.187357] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 29.189348] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 29.237078] High memory: 0k
[ 29.237096] Memory: 311928k/327680k available (2692k kernel code, 15448k reserved, 276k data, 304k bss, 180k init)
[ 29.237438] Calibrating delay loop... 33.15 BogoMIPS (lpj=66304)
[ 29.320596] Security Framework v1.0.0 initialized
[ 29.320647] SELinux: Disabled at boot.
[ 29.320707] Mount-cache hash table entries: 512
[ 29.321320] device-tree: property "l2-cache" name conflicts with node in /cpus/PowerPC,750@0
[ 29.324084] checking if image is initramfs... it is
[ 31.303281] Freeing initrd memory: 7848k freed
[ 31.306694] NET: Registered protocol family 16
[ 31.307818] PCI: Probing PCI hardware
[ 31.316152] Registering PowerMac CPU frequency driver
[ 31.316179] Low: 400 Mhz, High: 499 Mhz, Boot: 499 Mhz
[ 31.316407] Thermal assist unit using timers, shrink_timer: 500 jiffies
[ 31.318367] audit: initializing netlink socket (disabled)
[ 31.318429] audit(1219512084.128:1): initialized
[ 31.318929] VFS: Disk quotas dquot_6.5.1
[ 31.319039] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 31.319325] Initializing Cryptographic API
[ 31.319346] io scheduler noop registered
[ 31.319378] io scheduler anticipatory registered
[ 31.319398] io scheduler deadline registered
[ 31.319448] io scheduler cfq registered
[ 31.320288] PCI: Enabling device 0000:00:10.0 (0086 -> 0087)
[ 31.320932] aty128fb: Invalid ROM signature 638e should be 0xaa55
[ 31.320959] aty128fb: BIOS not located, guessing timings.
[ 31.320983] aty128fb: Rage128 LF M3 AGP [chip rev 0x0] 8M 128-bit SDR SGRAM (1:1)
[ 31.355270] Console: switching to colour frame buffer device 128x48
[ 31.365067] Registered "ati" backlight controller,level: 15/15
[ 31.365087] fb0: ATY Rage128 frame buffer device on Rage128 LF M3 AGP
[ 31.451746] Macintosh non-volatile memory driver v1.1
[ 31.452058] IN from bad port 64 at c018d6e8
[ 31.452122] IN from bad port 60 at c018d71c
[ 31.452132] IN from bad port 64 at c018d6e8
[ 31.452189] IN from bad port 60 at c018d71c
[ 31.452199] IN from bad port 64 at c018d6e8
[ 31.452256] IN from bad port 60 at c018d71c
[ 31.452265] IN from bad port 64 at c018d6e8
[ 31.452323] IN from bad port 60 at c018d71c
[ 31.452333] IN from bad port 64 at c018d6e8
[ 31.452390] IN from bad port 60 at c018d71c
[ 31.452400] IN from bad port 64 at c018d6e8
[ 31.452457] IN from bad port 60 at c018d71c
[ 31.452467] IN from bad port 64 at c018d6e8
[ 31.452524] IN from bad port 60 at c018d71c
[ 31.452534] IN from bad port 64 at c018d6e8
[ 31.452592] IN from bad port 60 at c018d71c
[ 31.452601] IN from bad port 64 at c018d6e8
[ 31.452659] IN from bad port 60 at c018d71c
[ 31.452668] IN from bad port 64 at c018d6e8
[ 31.452726] IN from bad port 60 at c018d71c
[ 31.452735] IN from bad port 64 at c018d6e8
[ 31.452793] IN from bad port 60 at c018d71c
[ 31.452802] IN from bad port 64 at c018d6e8
[ 31.452860] IN from bad port 60 at c018d71c
[ 31.452869] IN from bad port 64 at c018d6e8
[ 31.452927] IN from bad port 60 at c018d71c
[ 31.452936] IN from bad port 64 at c018d6e8
[ 31.452994] IN from bad port 60 at c018d71c
[ 31.453003] IN from bad port 64 at c018d6e8
[ 31.453061] IN from bad port 60 at c018d71c
[ 31.453070] IN from bad port 64 at c018d6e8
[ 31.453128] IN from bad port 60 at c018d71c
[ 31.453137] IN from bad port 64 at c018d6e8
[ 31.453169] i8042.c: No controller found.
[ 31.454960] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 31.455406] MacIO PCI driver attached to Pangea chipset
[ 31.458170] input: Macintosh mouse button emulation as /class/input/input0
[ 31.458725] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 31.458750] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 31.458806] adb: starting probe task...
[ 31.485133] adb devices: [2]: 2 c9 [7]: 7 1f
[ 31.490642] ADB keyboard at 2, handler 1
[ 31.490688] Detected ADB keyboard, type JIS.
[ 31.490909] input: ADB keyboard as /class/input/input1
[ 31.491145] input: ADB Powerbook buttons as /class/input/input2
[ 31.491166] adb: finished probe task...
[ 32.480489] ide0: Found Apple KeyLargo ATA-4 controller, bus ID 2, irq 19
[ 32.480554] Probing IDE interface ide0...
[ 32.768823] hda: TOSHIBA MK1017GAP, ATA DISK drive
[ 33.216806] hdb: MATSHITA CR-176, ATAPI CD/DVD-ROM drive
[ 33.272501] hda: Enabling Ultra DMA 2
[ 33.273507] hdb: Enabling Ultra DMA 2
[ 33.274634] ide0 at 0xd500e000-0xd500e007,0xd500e160 on irq 19
[ 33.275460] mice: PS/2 mouse device common for all mice
[ 33.275790] NET: Registered protocol family 2
[ 33.308748] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 33.309532] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
[ 33.310150] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 33.310700] TCP: Hash tables configured (established 16384 bind 16384)
[ 33.310714] TCP reno registered
[ 33.311025] TCP bic registered
[ 33.311052] NET: Registered protocol family 1
[ 33.311086] NET: Registered protocol family 8
[ 33.311095] NET: Registered protocol family 20
[ 33.311325] Freeing unused kernel memory: 180k init
[ 34.911747] Capability LSM initialized
[ 35.066289] Found KeyWest i2c on "uni-n", 2 channels, stepping: 4 bits
[ 35.066700] Found KeyWest i2c on "mac-io", 1 channel, stepping: 4 bits
[ 37.652409] hda: max request size: 128KiB
[ 38.017883] hda: 19640880 sectors (10056 MB), CHS=19485/16/63, UDMA(33)
[ 38.017921] hda: cache flushes not supported
[ 38.018761] hda: [mac] hda1 hda2 hda3 hda4
[ 38.181573] hdb: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
[ 38.181625] Uniform CD-ROM driver Revision: 3.20
[ 39.095994] usbcore: registered new driver usbfs
[ 39.098061] usbcore: registered new driver hub
[ 39.106421] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 39.108373] PCI: Enabling device 0001:10:18.0 (0000 -> 0002)
[ 39.108438] ohci_hcd 0001:10:18.0: OHCI Host Controller
[ 39.110720] ohci_hcd 0001:10:18.0: new USB bus registered, assigned bus number 1
[ 39.110773] ohci_hcd 0001:10:18.0: irq 27, io mem 0x80081000
[ 39.145549] hub 1-0:1.0: USB hub found
[ 39.145639] hub 1-0:1.0: 2 ports detected
[ 39.249838] PCI: Enabling device 0001:10:19.0 (0000 -> 0002)
[ 39.249903] ohci_hcd 0001:10:19.0: OHCI Host Controller
[ 39.250470] ohci_hcd 0001:10:19.0: new USB bus registered, assigned bus number 2
[ 39.250520] ohci_hcd 0001:10:19.0: irq 28, io mem 0x80080000
[ 39.713537] hub 2-0:1.0: USB hub found
[ 39.713632] hub 2-0:1.0: 2 ports detected
[ 39.935799] ieee1394: Initialized config rom entry `ip1394'
[ 39.950567] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[ 39.953837] ohci1394: fw-host0: Unexpected PCI resource length of 1000!
[ 40.002570] usb 2-1: new low speed USB device using ohci_hcd and address 2
[ 40.004413] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048]
[ 40.267666] usbcore: registered new driver hiddev
[ 40.279540] input: HID 062a:0000 as /class/input/input3
[ 40.280051] input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0001:10:19.0-1
[ 40.280113] usbcore: registered new driver usbhid
[ 40.280127] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 40.424857] Attempting manual resume
[ 40.583502] kjournald starting. Commit interval 5 seconds
[ 40.583578] EXT3-fs: mounted filesystem with ordered data mode.
[ 58.574359] ts: Compaq touchscreen protocol output
[ 86.420806] Linux agpgart interface v0.101 (c) Dave Jones
[ 86.426169] agpgart: Detected Apple UniNorth/Pangea chipset
[ 86.426553] agpgart: configuring for size idx: 4
[ 86.426843] agpgart: AGP aperture is 16M @ 0x0
[ 88.304599] sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
[ 88.368840] PHY ID: 4061e3, addr: 0
[ 88.370548] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:93:14:ed:dc
[ 88.370576] eth0: Found BCM5221 PHY
[ 90.768685] eth0: Link is up at 100 Mbps, full-duplex.
[ 90.768713] eth0: Pause is disabled
[ 91.753549] NET: Registered protocol family 17
[ 92.785053] apm_emu: APM Emulation 0.5 initialized.
[ 93.131019] SCSI subsystem initialized
[ 93.160151] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[ 93.160184] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[ 93.160194] ieee1394: sbp2: Try serialize_io=0 for better performance
[ 94.900912] input: PowerMac Beep as /class/input/input4
[ 95.499981] fuse init (API version 7.3)
[ 96.009517] Adding 437584k swap on /dev/hda4. Priority:-1 extents:1 across:437584k
[ 96.128707] EXT3 FS on hda3, internal journal
[ 97.486528] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[ 117.934328] eth0: Link is up at 100 Mbps, full-duplex.
[ 117.934367] eth0: Pause is disabled
[ 182.690363] NET: Registered protocol family 10
[ 182.690894] lo: Disabled Privacy Extensions
[ 182.691655] IPv6 over IPv4 tunneling driver
[ 289.331489] eth0: Link is up at 100 Mbps, full-duplex.
[ 289.331531] eth0: Pause is disabled
[ 339.251977] eth0: Link is up at 100 Mbps, full-duplex.
[ 339.252012] eth0: Pause is disabled
[ 1953.362446] eth0: Link down
[ 1955.762518] eth0: Link is up at 100 Mbps, full-duplex.
[ 1955.762550] eth0: Pause is disabled
[ 1988.167112] eth0: Link down
[ 1990.567225] eth0: Link is up at 100 Mbps, full-duplex.
[ 1990.567259] eth0: Pause is disabled
[ 4167.015636] failed to set volume
[ 4167.819026] eth0: suspending, WakeOnLan disabled
[ 4167.912915] aty128fb: suspending...
[ 4168.572759] aty128fb: resumed !
[ 4168.725299] eth0: resuming
[ 4168.790656] PHY ID: 4061e3, addr: 0
[ 4171.190461] eth0: Link is up at 100 Mbps, full-duplex.
[ 4171.190697] eth0: Pause is disabled
[ 4171.229740] hda: Enabling Ultra DMA 2
[ 4171.281298] hdb: Enabling Ultra DMA 2
[ 4172.067654] adb: starting probe task...
[ 4172.092346] adb devices: [2]: 2 c9 [7]: 7 1f
[ 4172.097378] ADB keyboard at 2, handler 1
[ 4172.097590] adb: finished probe task...
[ 4185.174386] failed to set volume
[ 4185.855047] eth0: suspending, WakeOnLan disabled
[ 4185.950834] aty128fb: suspending...
[ 4186.610193] aty128fb: resumed !
[ 4186.763557] eth0: resuming
[ 4186.828925] PHY ID: 4061e3, addr: 0
[ 4189.228719] eth0: Link is up at 100 Mbps, full-duplex.
[ 4189.228973] eth0: Pause is disabled
[ 4189.240153] hda: Enabling Ultra DMA 2
[ 4189.251569] hdb: Enabling Ultra DMA 2
[ 4190.037851] adb: starting probe task...
[ 4190.065447] adb devices: [2]: 2 c9 [7]: 7 1f
[ 4190.070994] ADB keyboard at 2, handler 1
[ 4190.071176] adb: finished probe task...
[ 4201.638248] failed to set volume
[ 4202.279489] eth0: suspending, WakeOnLan disabled
[ 4202.372636] aty128fb: suspending...
[ 4203.029868] aty128fb: resumed !
[ 4203.182427] eth0: resuming
[ 4203.247809] PHY ID: 4061e3, addr: 0
[ 4205.580022] hda: Enabling Ultra DMA 2
[ 4205.587849] hdb: Enabling Ultra DMA 2
[ 4205.647596] eth0: Link is up at 100 Mbps, full-duplex.
[ 4205.647852] eth0: Pause is disabled
[ 4206.372731] adb: starting probe task...
[ 4206.399709] adb devices: [2]: 2 c9 [7]: 7 1f
[ 4206.405293] ADB keyboard at 2, handler 1
[ 4206.405473] adb: finished probe task...
[ 5218.577116] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 5221.753175] usb 1-1: device descriptor read/64, error -110
[ 5237.035311] usb 1-1: device descriptor read/64, error -110
[ 5237.315293] usb 1-1: new full speed USB device using ohci_hcd and address 3
[ 5240.494786] usb 1-1: device descriptor read/64, error -110
[ 5255.779270] usb 1-1: device descriptor read/64, error -110
[ 5256.059235] usb 1-1: new full speed USB device using ohci_hcd and address 4
[ 5266.467296] usb 1-1: device not accepting address 4, error -110
[ 5266.643298] usb 1-1: new full speed USB device using ohci_hcd and address 5
[ 5277.054550] usb 1-1: device not accepting address 5, error -110
[ 5411.370557] usb 1-1: new full speed USB device using ohci_hcd and address 6
[ 5414.546566] usb 1-1: device descriptor read/64, error -110
[ 5429.826583] usb 1-1: device descriptor read/64, error -110
[ 5430.106596] usb 1-1: new full speed USB device using ohci_hcd and address 7
[ 5433.282588] usb 1-1: device descriptor read/64, error -110
[ 5448.562555] usb 1-1: device descriptor read/64, error -110
[ 5448.842546] usb 1-1: new full speed USB device using ohci_hcd and address 8
[ 5459.250556] usb 1-1: device not accepting address 8, error -110
[ 5459.426566] usb 1-1: new full speed USB device using ohci_hcd and address 9
[ 5469.834560] usb 1-1: device not accepting address 9, error -110
[ 6872.360996] usb 1-1: new full speed USB device using ohci_hcd and address 10
[ 6875.536944] usb 1-1: device descriptor read/64, error -110
[ 6890.817930] usb 1-1: device descriptor read/64, error -110
[ 6891.097929] usb 1-1: new full speed USB device using ohci_hcd and address 11
[ 6894.273909] usb 1-1: device descriptor read/64, error -110
[ 6908.284956] usb 1-1: new full speed USB device using ohci_hcd and address 12
[ 6911.460931] usb 1-1: device descriptor read/64, error -110
[ 6926.740918] usb 1-1: device descriptor read/64, error -110
[ 6927.020921] usb 1-1: new full speed USB device using ohci_hcd and address 13
[ 6930.196960] usb 1-1: device descriptor read/64, error -110
[ 6945.476896] usb 1-1: device descriptor read/64, error -110
[ 6945.756925] usb 1-1: new full speed USB device using ohci_hcd and address 14
[ 6956.164907] usb 1-1: device not accepting address 14, error -110
[ 6956.340918] usb 1-1: new full speed USB device using ohci_hcd and address 15
[ 6966.753073] usb 1-1: device not accepting address 15, error -110
[ 8123.004508] hdb: packet command error: status=0x51 { DriveReady SeekComplete Error }
[ 8123.004548] hdb: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 8123.004567] ide: failed opcode was: unknown
[ 8123.006809] cdrom: open failed.
[ 8392.802606] usb 1-1: new full speed USB device using ohci_hcd and address 16
[ 8395.979492] usb 1-1: device descriptor read/64, error -110
[ 8397.895508] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 8399.087505] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 8400.279506] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 8401.471523] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 8402.383514] usb 1-1: new full speed USB device using ohci_hcd and address 20
[ 8405.559496] usb 1-1: device descriptor read/64, error -110
[ 8420.839504] usb 1-1: device descriptor read/64, error -110
[ 8421.119497] usb 1-1: new full speed USB device using ohci_hcd and address 21
[ 8424.295661] usb 1-1: device descriptor read/64, error -110
[ 8426.008319] hdb: packet command error: status=0x51 { DriveReady SeekComplete Error }
[ 8426.008362] hdb: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 8426.008381] ide: failed opcode was: unknown
[ 8426.010706] cdrom: open failed.
[ 8439.575510] usb 1-1: device descriptor read/64, error -110
[ 8439.855470] usb 1-1: new full speed USB device using ohci_hcd and address 22
[ 8450.263470] usb 1-1: device not accepting address 22, error -110
[ 8450.439516] usb 1-1: new full speed USB device using ohci_hcd and address 23
[ 8460.847474] usb 1-1: device not accepting address 23, error -110
[ 9358.317128] usb 1-1: new full speed USB device using ohci_hcd and address 24
[ 9361.493181] usb 1-1: device descriptor read/64, error -110
[ 9376.778015] usb 1-1: device descriptor read/64, error -110
[ 9377.058019] usb 1-1: new full speed USB device using ohci_hcd and address 25
[ 9380.234090] usb 1-1: device descriptor read/64, error -110


_________________
在学习linux的道路上自在而行。


页首
 用户资料  
 
11 楼 
 文章标题 :
帖子发表于 : 2008-08-24 17:44 
头像

注册: 2008-04-02 15:36
帖子: 724
地址: O_O
送出感谢: 0 次
接收感谢: 0 次
源:http://www.mepis.org/node/5860

代码:
echo Y > /sys/module/usbcore/parameters/old_scheme_first


内核可能需要升级


_________________
^o^ && O_O && ^_^
One World|One Dream|One Piece
愛 ^_^ 這個 美麗的世界O_O

本公司专治各种不服、不爽、谩骂、挑衅。


页首
 用户资料  
 
12 楼 
 文章标题 :
帖子发表于 : 2008-08-24 23:48 

注册: 2008-05-03 23:42
帖子: 3681
送出感谢: 4
接收感谢: 6
ibook g3 的 usb 是 1.1 的吧,别整了,你应该买个火线硬盘的。或者直接把内置硬盘升级一下,内存也该加点了。
usb 移动硬盘很可能是供电不足的问题,火线硬盘应该没有这个问题。如果你有双系统,倒是可以在 OS 9 / OS X 下面看看,如果也认不到,就是硬件问题了。搭配的系统盘是 OS 9 还是 OS X?装过吗? 你的机子跑 panther 应该不错,我不会用它来跑 ubuntu。我有两张 panther 的盘子,可以送给你 :)


页首
 用户资料  
 
13 楼 
 文章标题 :
帖子发表于 : 2008-08-25 9:06 
头像

注册: 2005-08-14 21:55
帖子: 58428
地址: 长沙
送出感谢: 4
接收感谢: 272
是供电不足,导致一直跳地址。

引用:
Maybe the USB cable is bad?


下次别贴这么多,看着累,应该是插入u后,dmesg|tail -n 20 这样看。


_________________
● 鸣学


页首
 用户资料  
 
14 楼 
 文章标题 : 分区问题啊!!!急!!!!
帖子发表于 : 2008-08-25 9:10 

注册: 2008-08-15 8:24
帖子: 1
送出感谢: 0 次
接收感谢: 0 次
同志们好··一直有个问题困扰着我·请朋友们帮我这个菜鸟解决下··
在我安装Ubuntu8.04的时候到了step 4 of 7的时候,也就是准备分区的时候,看不到硬盘信息更别说分区了,如何设置?


页首
 用户资料  
 
15 楼 
 文章标题 :
帖子发表于 : 2008-08-25 12:49 
头像

注册: 2006-12-29 20:13
帖子: 694
送出感谢: 0 次
接收感谢: 0 次
billbear 写道:
ibook g3 的 usb 是 1.1 的吧,别整了,你应该买个火线硬盘的。或者直接把内置硬盘升级一下,内存也该加点了。
usb 移动硬盘很可能是供电不足的问题,火线硬盘应该没有这个问题。如果你有双系统,倒是可以在 OS 9 / OS X 下面看看,如果也认不到,就是硬件问题了。搭配的系统盘是 OS 9 还是 OS X?装过吗? 你的机子跑 panther 应该不错,我不会用它来跑 ubuntu。我有两张 panther 的盘子,可以送给你 :)
os x太慢,换9.2又太缺软件,都格掉了。不打算换os的系统了
谢大家了,此帖结帖吧


_________________
在学习linux的道路上自在而行。


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 15 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 4 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
cron
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译