[问题]7.10装vmware6.02 出错了.安装完后,老是提示config出错~

asfasf · #1

先是用 vmware-installpl装完.然后提示到 None of the pre-built vmmon modules for VMware Workstation is suitable for your
running kernel. Do you want this program to try to build the vmmon module for
your system (you need to have a C compiler installed on your system)? [yes] 这里时选择no,用补丁来装,用116updata的
而且最奇怪的就是一直到安装完成为止,都没提示我叫我输入序列号.
每次运行的时候都是提示这个 :
/usr/bin/vmware
vmware is installed, but it has not been (correctly) configured
for this system. To (re-)configure it, invoke the following command:
/usr/bin/vmware-config.pl.

整个安装过程如下:
Updating /usr/bin/vmware ... No patch needed/available
Updating /usr/bin/vmnet-bridge ... No patch needed/available
Updating /usr/lib/vmware/bin/vmware-vmx ... No patch needed/available
Updating /usr/lib/vmware/bin-debug/vmware-vmx ... No patch needed/available
VMware modules in "/usr/lib/vmware/modules/source" has been updated.

Before running VMware for the first time after update, you need to configure it
for your running kernel by invoking the following command:
"/usr/bin/vmware-config.pl". Do you want this script to invoke the command for
you now? [yes]

Making sure services for VMware Workstation are stopped.

Stopping VMware services:
/etc/init.d/vmware: 838: /sbin/pidof: not found
Virtual machine monitor done

Configuring fallback GTK+ 2.4 libraries.

In which directory do you want to install the theme icons?
[/usr/share/icons]

What directory contains your desktop menu entry files? These files have a
.desktop file extension. [/usr/share/applications]

In which directory do you want to install the application's icon?
[/usr/share/pixmaps]

Trying to find a suitable vmmon module for your running kernel.

None of the pre-built vmmon modules for VMware Workstation is suitable for your
running kernel. Do you want this program to try to build the vmmon module for
your system (you need to have a C compiler installed on your system)? [yes]

Using compiler "/usr/bin/gcc". Use environment variable CC to override.

What is the location of the directory of C header files that match your running
kernel? [/lib/modules/2.6.22-14-generic/build/include]

Extracting the sources of the vmmon module.

Building the vmmon module.

Unknown VMware Workstation e.x.p build 36983 detected. Building for Workstation 6.0.0.
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config0/vmmon-only'
make -C /lib/modules/2.6.22-14-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.22-14-generic'
CC [M] /tmp/vmware-config0/vmmon-only/linux/driver.o
CC [M] /tmp/vmware-config0/vmmon-only/linux/driverLog.o
CC [M] /tmp/vmware-config0/vmmon-only/linux/hostif.o
CC [M] /tmp/vmware-config0/vmmon-only/common/comport.o
CC [M] /tmp/vmware-config0/vmmon-only/common/cpuid.o
CC [M] /tmp/vmware-config0/vmmon-only/common/hash.o
CC [M] /tmp/vmware-config0/vmmon-only/common/memtrack.o
CC [M] /tmp/vmware-config0/vmmon-only/common/phystrack.o
CC [M] /tmp/vmware-config0/vmmon-only/common/task.o
cc1plus: 警告：命令行选项“-Wdeclaration-after-statement”对 C/ObjC 是有效的，但对 C++ 无效
cc1plus: 警告：命令行选项“-Wno-pointer-sign”对 C/ObjC 是有效的，但对 C++ 无效
cc1plus: 警告：命令行选项“-Wstrict-prototypes”对 Ada/C/ObjC 是有效的，但对 C++ 无效
cc1plus: 警告：命令行选项“-ffreestanding”对 C/ObjC 是有效的，但对 C++ 无效
/tmp/vmware-config0/vmmon-only/common/task_compat.h: In function ‘int Vmx86_RunVM(VMCrossPage*, VMDriver*) [with VMCrossPage = VMCrossPageV321]’:
/tmp/vmware-config0/vmmon-only/common/task_compat.h:2491: 警告：此函数中的 ‘sysenterState.SysenterStateV45::rsp’ 在使用前未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:2492: 警告：此函数中的 ‘sysenterState.SysenterStateV45::rip’ 在使用前未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:3028: 警告：此函数中的 ‘sysenterState.SysenterStateV45::validEIP’ 在使用前可能未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:3028: 警告：此函数中的 ‘sysenterState.SysenterStateV45::cs’ 在使用前可能未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h: In function ‘int Vmx86_RunVM(VMCrossPage*, VMDriver*) [with VMCrossPage = VMCrossPageV3]’:
/tmp/vmware-config0/vmmon-only/common/task_compat.h:2491: 警告：此函数中的 ‘sysenterState.SysenterStateV45::rsp’ 在使用前未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:2492: 警告：此函数中的 ‘sysenterState.SysenterStateV45::rip’ 在使用前未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:3028: 警告：此函数中的 ‘sysenterState.SysenterStateV45::validEIP’ 在使用前可能未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:3028: 警告：此函数中的 ‘sysenterState.SysenterStateV45::cs’ 在使用前可能未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h: In function ‘int Vmx86_RunVM(VMCrossPage*, VMDriver*) [with VMCrossPage = VMCrossPageGSX1]’:
/tmp/vmware-config0/vmmon-only/common/task_compat.h:2491: 警告：此函数中的 ‘sysenterState.SysenterStateV45::rsp’ 在使用前未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:2492: 警告：此函数中的 ‘sysenterState.SysenterStateV45::rip’ 在使用前未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:3028: 警告：此函数中的 ‘sysenterState.SysenterStateV45::validEIP’ 在使用前可能未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:3028: 警告：此函数中的 ‘sysenterState.SysenterStateV45::cs’ 在使用前可能未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h: In function ‘int Vmx86_RunVM(VMCrossPage*, VMDriver*) [with VMCrossPage = VMCrossPageV2]’:
/tmp/vmware-config0/vmmon-only/common/task_compat.h:2491: 警告：此函数中的 ‘sysenterState.SysenterStateV45::rsp’ 在使用前未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:2492: 警告：此函数中的 ‘sysenterState.SysenterStateV45::rip’ 在使用前未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:3028: 警告：此函数中的 ‘sysenterState.SysenterStateV45::validEIP’ 在使用前可能未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:3028: 警告：此函数中的 ‘sysenterState.SysenterStateV45::cs’ 在使用前可能未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h: In function ‘int Vmx86_RunVM_V4(VMDriver*, Vcpuid) [with VMCrossPage = VMCrossPageV4]’:
/tmp/vmware-config0/vmmon-only/common/task_compat.h:3028: 警告：此函数中的 ‘sysenterState.SysenterStateV45::validEIP’ 在使用前可能未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:3028: 警告：此函数中的 ‘sysenterState.SysenterStateV45::cs’ 在使用前可能未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:3028: 警告：此函数中的 ‘sysenterState.SysenterStateV45::rsp’ 在使用前可能未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:3028: 警告：此函数中的 ‘sysenterState.SysenterStateV45::rip’ 在使用前可能未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h: In function ‘int Vmx86_RunVM(VMDriver*, Vcpuid)’:
/tmp/vmware-config0/vmmon-only/common/task_compat.h:2491: 警告：此函数中的 ‘sysenterState.SysenterStateV45::rsp’ 在使用前未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:2492: 警告：此函数中的 ‘sysenterState.SysenterStateV45::rip’ 在使用前未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:3028: 警告：此函数中的 ‘sysenterState.SysenterStateV45::validEIP’ 在使用前可能未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:3028: 警告：此函数中的 ‘sysenterState.SysenterStateV45::cs’ 在使用前可能未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:3028: 警告：此函数中的 ‘sysenterState.SysenterStateV45::validEIP’ 在使用前可能未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:3028: 警告：此函数中的 ‘sysenterState.SysenterStateV45::cs’ 在使用前可能未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:3028: 警告：此函数中的 ‘sysenterState.SysenterStateV45::rsp’ 在使用前可能未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:3028: 警告：此函数中的 ‘sysenterState.SysenterStateV45::rip’ 在使用前可能未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:3028: 警告：此函数中的 ‘sysenterState.SysenterStateV45::validEIP’ 在使用前可能未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:3028: 警告：此函数中的 ‘sysenterState.SysenterStateV45::cs’ 在使用前可能未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:3028: 警告：此函数中的 ‘sysenterState.SysenterStateV45::rsp’ 在使用前可能未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:3028: 警告：此函数中的 ‘sysenterState.SysenterStateV45::rip’ 在使用前可能未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h: In function ‘void Task_Switch_V45(VMDriver*, Vcpuid)’:
/tmp/vmware-config0/vmmon-only/common/task_compat.h:2666: 警告：此函数中的 ‘sysenterState.SysenterStateV45::validEIP’ 在使用前可能未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:2666: 警告：此函数中的 ‘sysenterState.SysenterStateV45::cs’ 在使用前可能未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:2666: 警告：此函数中的 ‘sysenterState.SysenterStateV45::rsp’ 在使用前可能未初始化
/tmp/vmware-config0/vmmon-only/common/task_compat.h:2666: 警告：此函数中的 ‘sysenterState.SysenterStateV45::rip’ 在使用前可能未初始化
CC [M] /tmp/vmware-config0/vmmon-only/common/vmciContext.o
CC [M] /tmp/vmware-config0/vmmon-only/common/vmciDatagram.o
CC [M] /tmp/vmware-config0/vmmon-only/common/vmciDriver.o
CC [M] /tmp/vmware-config0/vmmon-only/common/vmciDs.o
CC [M] /tmp/vmware-config0/vmmon-only/common/vmciGroup.o
CC [M] /tmp/vmware-config0/vmmon-only/common/vmciHashtable.o
CC [M] /tmp/vmware-config0/vmmon-only/common/vmciProcess.o
CC [M] /tmp/vmware-config0/vmmon-only/common/vmciResource.o
CC [M] /tmp/vmware-config0/vmmon-only/common/vmciSharedMem.o
CC [M] /tmp/vmware-config0/vmmon-only/common/vmx86.o
CC [M] /tmp/vmware-config0/vmmon-only/vmcore/compat.o
CC [M] /tmp/vmware-config0/vmmon-only/vmcore/moduleloop.o
LD [M] /tmp/vmware-config0/vmmon-only/vmmon.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/vmware-config0/vmmon-only/vmmon.mod.o
LD [M] /tmp/vmware-config0/vmmon-only/vmmon.ko
make[1]: Leaving directory `/usr/src/linux-headers-2.6.22-14-generic'
cp -f vmmon.ko ./../vmmon.o
make: Leaving directory `/tmp/vmware-config0/vmmon-only'
The module loads perfectly in the running kernel.

Extracting the sources of the vmblock module.

Building the vmblock module.

Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config0/vmblock-only'
make -C /lib/modules/2.6.22-14-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.22-14-generic'
CC [M] /tmp/vmware-config0/vmblock-only/linux/block.o
CC [M] /tmp/vmware-config0/vmblock-only/linux/control.o
CC [M] /tmp/vmware-config0/vmblock-only/linux/dbllnklst.o
CC [M] /tmp/vmware-config0/vmblock-only/linux/dentry.o
CC [M] /tmp/vmware-config0/vmblock-only/linux/file.o
CC [M] /tmp/vmware-config0/vmblock-only/linux/filesystem.o
CC [M] /tmp/vmware-config0/vmblock-only/linux/inode.o
CC [M] /tmp/vmware-config0/vmblock-only/linux/module.o
CC [M] /tmp/vmware-config0/vmblock-only/linux/stubs.o
CC [M] /tmp/vmware-config0/vmblock-only/linux/super.o
LD [M] /tmp/vmware-config0/vmblock-only/vmblock.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/vmware-config0/vmblock-only/vmblock.mod.o
LD [M] /tmp/vmware-config0/vmblock-only/vmblock.ko
make[1]: Leaving directory `/usr/src/linux-headers-2.6.22-14-generic'
cp -f vmblock.ko ./../vmblock.o
make: Leaving directory `/tmp/vmware-config0/vmblock-only'
The module loads perfectly in the running kernel.

Do you want networking for your virtual machines? (yes/no/help) [yes]

Configuring a bridged network for vmnet0.

The following bridged networks have been defined:

. vmnet0 is bridged to eth0

All your ethernet interfaces are already bridged.

Do you want to be able to use NAT networking in your virtual machines? (yes/no)
[yes]

Configuring a NAT network for vmnet8.

Do you want this program to probe for an unused private subnet? (yes/no/help)
[yes]

Probing for an unused private subnet (this can take some time)...

The subnet 172.16.242.0/255.255.255.0 appears to be unused.

The following NAT networks have been defined:

. vmnet8 is a NAT network on private subnet 172.16.242.0.

Do you wish to configure another NAT network? (yes/no) [no]

Do you want to be able to use host-only networking in your virtual machines?
[yes]

Configuring a host-only network for vmnet1.

Do you want this program to probe for an unused private subnet? (yes/no/help)
[yes]

Probing for an unused private subnet (this can take some time)...

The subnet 192.168.68.0/255.255.255.0 appears to be unused.

The following host-only networks have been defined:

. vmnet1 is a host-only network on private subnet 192.168.68.0.

Do you wish to configure another host-only network? (yes/no) [no]

Extracting the sources of the vmnet module.

Building the vmnet module.

Unknown VMware Workstation e.x.p build 36983 detected. Building for Workstation 6.0.0.
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config0/vmnet-only'
make -C /lib/modules/2.6.22-14-generic/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.22-14-generic'
CC [M] /tmp/vmware-config0/vmnet-only/driver.o
CC [M] /tmp/vmware-config0/vmnet-only/hub.o
CC [M] /tmp/vmware-config0/vmnet-only/userif.o
CC [M] /tmp/vmware-config0/vmnet-only/netif.o
CC [M] /tmp/vmware-config0/vmnet-only/bridge.o
CC [M] /tmp/vmware-config0/vmnet-only/filter.o
CC [M] /tmp/vmware-config0/vmnet-only/procfs.o
CC [M] /tmp/vmware-config0/vmnet-only/smac_compat.o
CC [M] /tmp/vmware-config0/vmnet-only/smac_linux.x386.o
LD [M] /tmp/vmware-config0/vmnet-only/vmnet.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/vmware-config0/vmnet-only/vmnet.mod.o
LD [M] /tmp/vmware-config0/vmnet-only/vmnet.ko
make[1]: Leaving directory `/usr/src/linux-headers-2.6.22-14-generic'
cp -f vmnet.ko ./../vmnet.o
make: Leaving directory `/tmp/vmware-config0/vmnet-only'
The module loads perfectly in the running kernel.

Do you want to install the Eclipse Integrated Virtual Debugger? You must have
the Eclipse IDE installed. [no]

Starting VMware services:
Virtual machine monitor done
Blocking file system: failed
Virtual ethernet done
Bridged networking on /dev/vmnet0 done
Host network detection done
Host-only networking on /dev/vmnet1 (background) done
DHCP server on /dev/vmnet1 done
Host-only networking on /dev/vmnet8 (background) done
DHCP server on /dev/vmnet8 done
NAT service on /dev/vmnet8 done

The configuration of VMware Workstation e.x.p build-36983 for Linux for this
running kernel completed successfully.

You can now run VMware Workstation by invoking the following command:
"/usr/bin/vmware".

Enjoy,

--the VMware team