当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 2 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : no vm86_info:BAD 怎么回事?(已解决)
帖子发表于 : 2010-02-11 19:24 

注册: 2009-10-30 12:39
帖子: 17
送出感谢: 0 次
接收感谢: 0 次
KVM的虚拟机中的Cent OS 5.4启动报这个错,no vm86_info:BAD,无法登录,过一会后又可以登录,但是系统明显变得特别慢,whatis命令基本上查不到任何东西,输入makewhatis命令后也显示no vm86_info:BAD,然后长时间没有响应。。。请问这是为何??

KVM的宿主操作系统是UBUNTU 9.10,下午升级到2.6.31-20,升级后把老的2.6.31-19之前的内核全部删掉了,不知道是否是这个影响的??

dmesg信息如下:

代码:
Linux version 2.6.18-164.el5 (mockbuild@builder16.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Thu Sep 3 03:33:56 EDT 2009

BIOS-provided physical RAM map:

BIOS-e820: 0000000000010000 - 000000000009f000 (usable)

BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)

BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)

BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)

BIOS-e820: 000000001fff0000 - 0000000020000000 (ACPI data)

BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved)

0MB HIGHMEM available.

511MB LOWMEM available.

found SMP MP-table at 000fbc90

Memory for crash kernel (0x0 to 0x0) notwithin permissible range

disabling kdump

Using x86 segment limits to approximate NX protection

On node 0 totalpages: 131056

  DMA zone: 4096 pages, LIFO batch:0

  Normal zone: 126960 pages, LIFO batch:31

DMI 2.4 present.

Using APIC driver default

ACPI: RSDP (v000 QEMU                                  ) @ 0x000fbde0

ACPI: RSDT (v001 QEMU   QEMURSDT 0x00000001 QEMU 0x00000001) @ 0x1fff0000

ACPI: FADT (v001 QEMU   QEMUFACP 0x00000001 QEMU 0x00000001) @ 0x1fff01b4

ACPI: SSDT (v001   BXPC   BXSSDT 0x00000001 INTL 0x20090521) @ 0x1fff2054

ACPI: MADT (v001 QEMU   QEMUAPIC 0x00000001 QEMU 0x00000001) @ 0x1fff2a38

ACPI: HPET (v001 QEMU   QEMUHPET 0x00000001 QEMU 0x00000001) @ 0x1fff2b90

ACPI: DSDT (v001   BXPC   BXDSDT 0x00000001 INTL 0x20090521) @ 0x00000000

ACPI: PM-Timer IO Port: 0xb008

ACPI: Local APIC address 0xfee00000

ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)

Processor #0 6:2 APIC version 17

ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)

Processor #1 6:2 APIC version 17

ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)

ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)

ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)

ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)

ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)

ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)

ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)

ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled)

ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled)

ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled)

ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled)

ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled)

ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled)

ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled)

ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])

IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23

ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)

ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)

ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)

ACPI: IRQ0 used by override.

ACPI: IRQ2 used by override.

ACPI: IRQ5 used by override.

ACPI: IRQ9 used by override.

ACPI: IRQ10 used by override.

ACPI: IRQ11 used by override.

Enabling APIC mode:  Flat.  Using 1 I/O APICs

ACPI: HPET id: 0x8086a201 base: 0xfed00000

Using ACPI (MADT) for SMP configuration information

Allocating PCI resources starting at 30000000 (gap: 20000000:dffbc000)

Detected 2194.531 MHz processor.

Built 1 zonelists.  Total pages: 131056

Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet clock=pit

Warning! clock= boot option is deprecated. Use clocksource=xyz

mapped APIC to ffffd000 (fee00000)

mapped IOAPIC to ffffc000 (fec00000)

Enabling fast FPU save and restore... done.

Enabling unmasked SIMD FPU exception support... done.

Initializing CPU#0

CPU 0 irqstacks, hard=c0761000 soft=c0741000

PID hash table entries: 2048 (order: 11, 8192 bytes)

Console: colour VGA+ 80x25

Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

Memory: 511700k/524224k available (2154k kernel code, 11856k reserved, 899k data, 232k init, 0k highmem)

Checking if this processor honours the WP bit even in supervisor mode... Ok.

hpet0: at MMIO 0xfed00000 (virtual 0xe0800000), IRQs 2, 8, 0

hpet0: 3 64-bit timers, 100000000 Hz

Using HPET for base-timer

Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.06 BogoMIPS (lpj=2194531)

Security Framework v1.0.0 initialized

SELinux:  Initializing.

SELinux:  Starting in permissive mode

selinux_register_security:  Registering secondary module capability

Capability LSM initialized as secondary

Mount-cache hash table entries: 512

CPU: After generic identify, caps: 078bfbfd 2191abfd 00000000 00000000 80000001 00000000 00000004

CPU: After vendor identify, caps: 078bfbfd 2191abfd 00000000 00000000 80000001 00000000 00000004

CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)

CPU: L2 Cache: 512K (64 bytes/line)

CPU: After all inits, caps: 078bf3fd 2191abfd 00000000 01000420 80000001 00000000 00000004

Intel machine check architecture supported.

Intel machine check reporting enabled on CPU#0.

Checking 'hlt' instruction... OK.

SMP alternatives: switching to UP code

ACPI: Core revision 20060707

CPU0: AMD QEMU Virtual CPU version 0.11.0 stepping 03

SMP alternatives: switching to SMP code

Booting processor 1/1 eip 11000

CPU 1 irqstacks, hard=c0762000 soft=c0742000

Initializing CPU#1

calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.

Probably due to long platform interrupts. Consider using "lpj=" boot option.

Calibrating delay loop... 1034.24 BogoMIPS (lpj=517120)

CPU: After generic identify, caps: 078bfbfd 2191abfd 00000000 00000000 80000001 00000000 00000004

CPU: After vendor identify, caps: 078bfbfd 2191abfd 00000000 00000000 80000001 00000000 00000004

CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)

CPU: L2 Cache: 512K (64 bytes/line)

CPU: After all inits, caps: 078bf3fd 2191abfd 00000000 01000420 80000001 00000000 00000004

Intel machine check architecture supported.

Intel machine check reporting enabled on CPU#1.

CPU1: AMD QEMU Virtual CPU version 0.11.0 stepping 03

Total of 2 processors activated (5423.30 BogoMIPS).

WARNING: This combination of AMD processors is not suitable for SMP.

ENABLING IO-APIC IRQs

..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1

checking TSC synchronization across 2 CPUs:

CPU#0 had -127 usecs TSC skew, fixed it up.

CPU#1 had 127 usecs TSC skew, fixed it up.

Brought up 2 CPUs

sizeof(vma)=84 bytes

sizeof(page)=32 bytes

sizeof(inode)=340 bytes

sizeof(dentry)=136 bytes

sizeof(ext3inode)=492 bytes

sizeof(buffer_head)=52 bytes

sizeof(skbuff)=176 bytes

migration_cost=213

checking if image is initramfs... it is

Freeing initrd memory: 3153k freed

NET: Registered protocol family 16

ACPI: bus type pci registered

PCI: PCI BIOS revision 2.10 entry at 0xfb490, last bus=0

PCI: Using configuration type 1

Setting up standard PCI resources

ACPI: Interpreter enabled

ACPI: Using IOAPIC for interrupt routing

ACPI: No dock devices found.

ACPI: PCI Root Bridge [PCI0] (0000:00)

PCI quirk: region b000-b03f claimed by PIIX4 ACPI

PCI quirk: region b100-b10f claimed by PIIX4 SMB

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)

ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)

ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)

ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)

Linux Plug and Play Support v0.97 (c) Adam Belay

pnp: PnP ACPI init

pnp: PnP ACPI: found 6 devices

usbcore: registered new driver usbfs

usbcore: registered new driver hub

PCI: Using ACPI for IRQ routing

PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report

NetLabel: Initializing

NetLabel:  domain hash size = 128

NetLabel:  protocols = UNLABELED CIPSOv4

NetLabel:  unlabeled traffic allowed by default

NET: Registered protocol family 2

IP route cache hash table entries: 4096 (order: 2, 16384 bytes)

TCP established hash table entries: 16384 (order: 5, 131072 bytes)

TCP bind hash table entries: 8192 (order: 4, 65536 bytes)

TCP: Hash tables configured (established 16384 bind 8192)

TCP reno registered

apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)

apm: disabled - APM is not SMP safe.

audit: initializing netlink socket (disabled)

type=2000 audit(1265882989.810:1): initialized

Total HugeTLB memory allocated, 0

VFS: Disk quotas dquot_6.5.1

Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

SELinux:  Registering netfilter hooks

Initializing Cryptographic API

alg: No test for crc32c (crc32c-generic)

ksign: Installing public key data

Loading keyring

- Added public key 581431131FF6A527

- User ID: CentOS (Kernel Module GPG key)

io scheduler noop registered

io scheduler anticipatory registered

io scheduler deadline registered

io scheduler cfq registered (default)

Limiting direct PCI/PCI transfers.

PCI: PIIX3: Enabling Passive Release on 0000:00:01.0

Activating ISA DMA hang workarounds.

Boot video device is 0000:00:02.0

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

Real Time Clock Driver v1.12ac

Non-volatile memory driver v1.2

Linux agpgart interface v0.101 (c) Dave Jones

Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled

serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

brd: module loaded

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

PIIX3: IDE controller at PCI slot 0000:00:01.1

PIIX3: chipset revision 0

PIIX3: not 100% native mode: will probe irqs later

PCI: Setting latency timer of device 0000:00:01.1 to 64

    ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:pio, hdb:pio

    ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:pio

Probing IDE interface ide0...

hda: QEMU HARDDISK, ATA DISK drive

hdb: QEMU HARDDISK, ATA DISK drive

ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

Probing IDE interface ide1...

hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive

hdd: QEMU HARDDISK, ATA DISK drive

ide1 at 0x170-0x177,0x376 on irq 15

hda: max request size: 512KiB

hda: 20971520 sectors (10737 MB) w/256KiB Cache, CHS=16383/255/63, (U)DMA

hda: cache flushes supported

hda: hda1 hda2

hdb: max request size: 512KiB

hdb: 2048000 sectors (1048 MB) w/256KiB Cache, CHS=2031/255/63, (U)DMA

hdb: cache flushes supported

hdb: hdb1

hdd: max request size: 512KiB

hdd: 2048000 sectors (1048 MB) w/256KiB Cache, CHS=2031/255/63, (U)DMA

hdd: cache flushes supported

hdd: hdd1

ide-floppy driver 0.99.newide

usbcore: registered new driver hiddev

usbcore: registered new driver usbhid

drivers/usb/input/hid-core.c: v2.6:USB HID core driver

PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12

serio: i8042 KBD port at 0x60,0x64 irq 1

serio: i8042 AUX port at 0x60,0x64 irq 12

mice: PS/2 mouse device common for all mice

md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27

md: bitmap version 4.39

TCP bic registered

Initializing IPsec netlink socket

NET: Registered protocol family 1

NET: Registered protocol family 17

Using IPI No-Shortcut mode

Time: pit clocksource has been installed.

ACPI: (supports S3 S4 S5)

Initalizing network drop monitor service

input: AT Translated Set 2 keyboard as /class/input/input0

Freeing unused kernel memory: 232k freed

Write protecting the kernel read-only data: 404k

input: ImExPS/2 Generic Explorer Mouse as /class/input/input1

ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)

USB Universal Host Controller Interface driver v3.0

ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11

ACPI: PCI Interrupt 0000:00:01.2[D] -> Link [LNKD] -> GSI 11 (level, high) -> IRQ 11

PCI: Setting latency timer of device 0000:00:01.2 to 64

uhci_hcd 0000:00:01.2: UHCI Host Controller

uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1

uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c020

usb usb1: configuration #1 chosen from 1 choice

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 2 ports detected

SCSI subsystem initialized

libata version 3.00 loaded.

device-mapper: uevent: version 1.0.3

device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com

device-mapper: dm-raid45: initialized v0.2594l

TSC appears to be running slowly. Marking it as unstable

kjournald starting.  Commit interval 5 seconds

EXT3-fs: mounted filesystem with ordered data mode.

type=1404 audit(1265883017.061:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295

security:  3 users, 6 roles, 1871 types, 242 bools, 1 sens, 1024 cats

security:  61 classes, 69981 rules

SELinux:  Completing initialization.

SELinux:  Setting up existing superblocks.

SELinux: initialized (dev dm-0, type ext3), uses xattr

SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts

SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts

SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts

SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs

SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts

SELinux: initialized (dev devpts, type devpts), uses transition SIDs

SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs

SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts

SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts

SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts

SELinux: initialized (dev pipefs, type pipefs), uses task SIDs

SELinux: initialized (dev sockfs, type sockfs), uses task SIDs

SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts

SELinux: initialized (dev proc, type proc), uses genfs_contexts

SELinux: initialized (dev bdev, type bdev), uses genfs_contexts

SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts

SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts

type=1403 audit(1265883022.466:3): policy loaded auid=4294967295 ses=4294967295

ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10

ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 10 (level, high) -> IRQ 10

8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)

ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11

ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 11 (level, high) -> IRQ 11

eth0: RTL-8139C+ at 0xe0942000, 54:52:00:7e:a1:14, IRQ 11

PCI: Setting latency timer of device 0000:00:03.0 to 64

input: PC Speaker as /class/input/input2

8139too Fast Ethernet driver 0.9.27

hdc: ATAPI 4X CD-ROM drive, 512kB Cache, (U)DMA

Uniform CD-ROM driver Revision: 3.20

piix4_smbus 0000:00:01.3: Found 0000:00:01.3 device

ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKD] -> GSI 11 (level, high) -> IRQ 11

sym0: <895a> rev 0x0 at pci 0000:00:04.0 irq 11

sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking

sym0: SCSI BUS has been reset.

scsi0 : sym-2.2.3

  Vendor: QEMU      Model: QEMU HARDDISK     Rev: 0.11

  Type:   Direct-Access                      ANSI SCSI revision: 03

target0:0:0: tagged command queuing enabled, command queue depth 16.

target0:0:0: Beginning Domain Validation

target0:0:0: Domain Validation skipping write tests

target0:0:0: Ending Domain Validation

SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB)

sda: Write Protect is off

sda: Mode Sense: 14 00 00 00

SCSI device sda: drive cache: write back

SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB)

sda: Write Protect is off

sda: Mode Sense: 14 00 00 00

SCSI device sda: drive cache: write back

sda: sda1 < sda5 >

sd 0:0:0:0: Attached scsi disk sda

sd 0:0:0:0: Attached scsi generic sg0 type 0

FDC 0 is a S82078B

lp: driver loaded but no devices found

ACPI: Power Button (FF) [PWRF]

md: Autodetecting RAID arrays.

md: autorun ...

md: ... autorun DONE.

device-mapper: multipath: version 1.0.5 loaded

EXT3 FS on dm-0, internal journal

kjournald starting.  Commit interval 5 seconds

EXT3 FS on hda1, internal journal

EXT3-fs: mounted filesystem with ordered data mode.

SELinux: initialized (dev hda1, type ext3), uses xattr

SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

kjournald starting.  Commit interval 5 seconds

EXT3 FS on sda5, internal journal

EXT3-fs: mounted filesystem with ordered data mode.

SELinux: initialized (dev sda5, type ext3), uses xattr

Adding 1048568k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:1048568k

SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts

NET: Registered protocol family 10

lo: Disabled Privacy Extensions

IPv6 over IPv4 tunneling driver

ip6_tables: (C) 2000-2006 Netfilter Core Team

ip_tables: (C) 2000-2006 Netfilter Core Team

Netfilter messages via NETLINK v0.30.

ip_conntrack version 2.4 (4095 buckets, 32760 max) - 228 bytes per conntrack

eth0: link up, 100Mbps, full-duplex, lpa 0x05E1

eth0: no IPv6 routers present

SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts

Bluetooth: Core ver 2.10

NET: Registered protocol family 31

Bluetooth: HCI device and connection manager initialized

Bluetooth: HCI socket layer initialized

Bluetooth: L2CAP ver 2.8

Bluetooth: L2CAP socket layer initialized

Bluetooth: RFCOMM socket layer initialized

Bluetooth: RFCOMM TTY layer initialized

Bluetooth: RFCOMM ver 1.8

no vm86_info: BAD

Bluetooth: HIDP (Human Interface Emulation) ver 1.1

SELinux: initialized (dev autofs, type autofs), uses genfs_contexts

SELinux: initialized (dev autofs, type autofs), uses genfs_contexts

SELinux: initialized (dev autofs, type autofs), uses genfs_contexts

no vm86_info: BAD

no vm86_info: BAD

no vm86_info: BAD


页首
 用户资料  
 
2 楼 
 文章标题 : Re: no vm86_info:BAD 怎么回事?(已解决)
帖子发表于 : 2010-02-12 17:35 

注册: 2009-10-30 12:39
帖子: 17
送出感谢: 0 次
接收感谢: 0 次
原来是kvm的问题,详见:
http://blog.chinaunix.net/u/4940/showart_2181623.html

希望对朋友们有所帮助


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 2 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 2 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译