当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 16 篇帖子 ]  前往页数 1, 2  下一页
作者 内容
1 楼 
 文章标题 : 7.10下virtualbox不能启动虚拟机
帖子发表于 : 2007-10-01 23:56 

注册: 2007-06-17 22:28
帖子: 56
送出感谢: 0 次
接收感谢: 0 次
错误如下

VirtualBox kernel driver not installed. The vboxdrv kernel module was either not loaded or /dev/vboxdrv was not created for some reason. Re-setup the kernel module by executing '/etc/init.d/vboxdrv setup' as root.
VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).


Result Code:
0x80004005
Component:
Console
Interface:
IConsole {1dea5c4b-0753-4193-b909-22330f64ec45}


附件:
Screenshot-VirtualBox - 错误.png
Screenshot-VirtualBox - 错误.png [ 29.96 KiB | 被浏览 2328 次 ]

页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2007-10-02 0:06 
头像

注册: 2007-03-13 17:26
帖子: 2254
送出感谢: 0 次
接收感谢: 1
executing '/etc/init.d/vboxdrv setup' as root.


页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2007-10-02 0:29 

注册: 2007-06-17 22:28
帖子: 56
送出感谢: 0 次
接收感谢: 0 次
how?
新手问


页首
 用户资料  
 
4 楼 
 文章标题 :
帖子发表于 : 2007-10-04 11:08 

注册: 2007-04-26 9:47
帖子: 8
送出感谢: 0 次
接收感谢: 0 次
就是执行一下 /etc/init.d/vboxdrv setup 这条命令就可以了。


页首
 用户资料  
 
5 楼 
 文章标题 :
帖子发表于 : 2007-10-04 12:18 

注册: 2006-01-10 19:09
帖子: 1334
送出感谢: 0 次
接收感谢: 0 次
进去也非常卡 我的机器 郁闷的


页首
 用户资料  
 
6 楼 
 文章标题 :
帖子发表于 : 2007-10-04 12:19 

注册: 2006-01-10 19:09
帖子: 1334
送出感谢: 0 次
接收感谢: 0 次
710下没有内核模块 还是直接下载704的版本安装


页首
 用户资料  
 
7 楼 
 文章标题 :
帖子发表于 : 2007-10-05 8:17 

注册: 2007-10-05 8:00
帖子: 15
送出感谢: 0 次
接收感谢: 0 次
可能所没有内核模块的缘故,毕竟内核模块的支持是VBox高效的原因


页首
 用户资料  
 
8 楼 
 文章标题 :
帖子发表于 : 2007-10-05 14:31 

注册: 2006-09-17 11:20
帖子: 1
送出感谢: 0 次
接收感谢: 0 次
ubuntu 7.04
升级内核到:Linux ss 2.6.22-6-generic #1 SMP Fri Jun 1 19:24:12 GMT 2007 i686 GNU/Linux
出现上述问题,执行:
peter@ss:~$ sudo /etc/init.d/vboxdrv setup
* Stopping VirtualBox kernel module vboxdrv [ OK ]
* Recompiling VirtualBox kernel module vboxdrv
* Look at /var/log/vbox-install.log to find out what went wrong
peter@ss:~$

进入 virtualbox 还是出错!卸载重装 1.50 版也是同样错误。

不知道谁有什么办法吗?


页首
 用户资料  
 
9 楼 
 文章标题 :
帖子发表于 : 2007-10-06 15:56 

注册: 2007-09-27 11:46
帖子: 5
地址: 香港
送出感谢: 0 次
接收感谢: 0 次
指令3個...在正VBOX正式版本出現前,先用用吧~(即是自行COMPILE VBOX的內核)

sudo /etc/init.d/vboxdrv setup
dmesg
sudo gedit /boot/grub/menu.lst

之後在kernel行的最後加上"nmi_watchdog=0"
一般都是這個,也有可能不是,詳細的自行參考dmesg中出現的提示...
最後REBOOT就能用了~


页首
 用户资料  
 
10 楼 
 文章标题 :
帖子发表于 : 2007-10-06 20:57 

注册: 2005-10-16 8:18
帖子: 15
送出感谢: 0 次
接收感谢: 0 次
根本就没有/etc/init.d/vboxdrv这个文件嘛:(


页首
 用户资料  
 
11 楼 
 文章标题 :
帖子发表于 : 2007-10-07 11:47 
头像

注册: 2007-02-02 18:14
帖子: 30702
系统: debian sid
送出感谢: 1
接收感谢: 34
ltkun 写道:
710下没有内核模块 还是直接下载704的版本安装

引用:
根本就没有/etc/init.d/vboxdrv这个文件嘛Sad

我的7.10也是搞了几天,去官方网下7.04班的deb包应该没有问题,我是这样的


_________________
醉了星星,醉月亮●●●●●The Long Way To Go(*^_^*)


页首
 用户资料  
 
12 楼 
 文章标题 :
帖子发表于 : 2007-10-07 22:12 

注册: 2007-06-17 22:28
帖子: 56
送出感谢: 0 次
接收感谢: 0 次
已经OK了,谢谢各位


页首
 用户资料  
 
13 楼 
 文章标题 :
帖子发表于 : 2007-10-10 20:15 
头像

注册: 2006-07-29 20:50
帖子: 250
送出感谢: 0 次
接收感谢: 0 次
Arikado 写道:
指令3個...在正VBOX正式版本出現前,先用用吧~(即是自行COMPILE VBOX的內核)

sudo /etc/init.d/vboxdrv setup
dmesg
sudo gedit /boot/grub/menu.lst

之後在kernel行的最後加上"nmi_watchdog=0"
一般都是這個,也有可能不是,詳細的自行參考dmesg中出現的提示...
最後REBOOT就能用了~

Arikado:你给看看偶的该如何设置?
====================================
liu@liu-desktop:~$ sudo /etc/init.d/vboxdrv setup
[sudo] password for liu:
* Stopping VirtualBox kernel module vboxdrv [ OK ]
* Recompiling VirtualBox kernel module vboxdrv
* Look at /var/log/vbox-install.log to find out what went wrong
liu@liu-desktop:~$ dmesg
[ 0.000000] Linux version 2.6.22-14-386 (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 Tue Oct 9 09:23:32 GMT 2007 (Ubuntu 2.6.22-14.41-386)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000002f7f0000 (usable)
[ 0.000000] BIOS-e820: 000000002f7f0000 - 000000002f7f3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000002f7f3000 - 000000002f800000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 759MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f5310
[ 0.000000] Entering add_active_range(0, 0, 194544) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 194544
[ 0.000000] HighMem 194544 -> 194544
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 194544
[ 0.000000] On node 0 totalpages: 194544
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1487 pages used for memmap
[ 0.000000] Normal zone: 188961 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI not present or invalid.
[ 0.000000] ACPI: RSDP signature @ 0xC00F8BD0 checksum 0
[ 0.000000] ACPI: RSDP 000F8BD0, 0014 (r0 IntelR)
[ 0.000000] ACPI: RSDT 2F7F3040, 0030 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 2F7F30C0, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 2F7F3180, 43DE (r1 INTELR AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 2F7F0000, 0040
[ 0.000000] ACPI: MCFG 2F7F7680, 003C (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC 2F7F75C0, 0068 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: no DMI BIOS year, acpi=force is required to enable ACPI
[ 0.000000] ACPI: Disabling ACPI support
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
[ 0.000000] Processor #0 15:4 APIC version 17
[ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Processors: 1
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 2f800000:b0800000)
[ 0.000000] Built 1 zonelists. Total pages: 193025
[ 0.000000] Kernel command line: root=UUID=053dcc66-7493-4e9a-8df0-919b65609c0a ro quiet splash locale=zh_CN nmi_watchdog=0
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2660.201 MHz processor.
[ 12.346266] Console: colour VGA+ 80x25
[ 12.346809] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 12.347283] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 12.359754] Memory: 760084k/778176k available (1929k kernel code, 17464k reserved, 877k data, 348k init, 0k highmem)
[ 12.359764] virtual kernel memory layout:
[ 12.359766] fixmap : 0xfffa8000 - 0xfffff000 ( 348 kB)
[ 12.359767] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 12.359768] vmalloc : 0xf0000000 - 0xff7fe000 ( 247 MB)
[ 12.359769] lowmem : 0xc0000000 - 0xef7f0000 ( 759 MB)
[ 12.359771] .init : 0xc03c0000 - 0xc0417000 ( 348 kB)
[ 12.359772] .data : 0xc02e25d5 - 0xc03bda04 ( 877 kB)
[ 12.359773] .text : 0xc0100000 - 0xc02e25d5 (1929 kB)
[ 12.359776] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 12.359828] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 12.439654] Calibrating delay using timer specific routine.. 5325.13 BogoMIPS (lpj=10650267)
[ 12.439677] Security Framework v1.0.0 initialized
[ 12.439684] SELinux: Disabled at boot.
[ 12.439690] Mount-cache hash table entries: 512
[ 12.439788] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000000
[ 12.439796] monitor/mwait feature present.
[ 12.439798] using mwait in idle threads.
[ 12.439805] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 12.439807] CPU: L2 cache: 1024K
[ 12.439810] CPU: After all inits, caps: bfebfbff 20100000 00000000 0000b180 0000651d 00000000 00000000
[ 12.439818] Compat vDSO mapped to ffffe000.
[ 12.439832] CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 01
[ 12.439841] Checking 'hlt' instruction... OK.
[ 12.456168] Early unpacking initramfs... done
[ 12.774023] ExtINT not setup in hardware but reported by MP table
[ 12.774110] ENABLING IO-APIC IRQs
[ 12.774294] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 13.026303] Booting paravirtualized kernel on bare hardware
[ 13.026366] Time: 20:11:20 Date: 09/10/107
[ 13.026389] NET: Registered protocol family 16
[ 13.026473] EISA bus registered
[ 13.052103] PCI: PCI BIOS revision 3.00 entry at 0xfaec0, last bus=1
[ 13.052105] PCI: Using configuration type 1
[ 13.052107] Setting up standard PCI resources
[ 13.066787] ACPI: Interpreter disabled.
[ 13.066791] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 13.066799] pnp: PnP ACPI: disabled
[ 13.066802] PnPBIOS: Scanning system for PnP BIOS support...
[ 13.067169] PnPBIOS: Found PnP BIOS installation structure at 0xc00fba60
[ 13.067173] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xba90, dseg 0xf0000
[ 13.068038] PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
[ 13.068078] PCI: Probing PCI hardware
[ 13.068082] PCI: Probing PCI hardware (bus 00)
[ 13.068587] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 13.068592] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 13.068897] PCI: Transparent bridge - 0000:00:1e.0
[ 13.070003] PCI: Discovered primary peer bus ff [IRQ]
[ 13.070009] PCI: Using IRQ router PIIX/ICH [8086/2640] at 0000:00:1f.0
[ 13.070020] PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 16
[ 13.070024] PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 23
[ 13.070027] PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 19
[ 13.070031] PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 18
[ 13.070035] PCI->APIC IRQ transform: 0000:00:1d.3[D] -> IRQ 16
[ 13.070038] PCI->APIC IRQ transform: 0000:00:1d.7[A] -> IRQ 23
[ 13.070042] PCI->APIC IRQ transform: 0000:00:1e.2[A] -> IRQ 17
[ 13.070047] PCI->APIC IRQ transform: 0000:00:1f.2[B] -> IRQ 19
[ 13.070051] PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 19
[ 13.070054] PCI->APIC IRQ transform: 0000:01:01.0[A] -> IRQ 18
[ 13.070058] PCI->APIC IRQ transform: 0000:01:05.0[A] -> IRQ 20
[ 13.081350] NET: Registered protocol family 8
[ 13.081352] NET: Registered protocol family 20
[ 13.081404] pnp: 00:08: iomem range 0x0-0x9ffff could not be reserved
[ 13.081408] pnp: 00:08: iomem range 0xffb00000-0xffb7ffff could not be reserved
[ 13.081411] pnp: 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
[ 13.081414] pnp: 00:08: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 13.081420] pnp: 00:09: iomem range 0xf0000-0xf3fff could not be reserved
[ 13.081423] pnp: 00:09: iomem range 0xf4000-0xf7fff could not be reserved
[ 13.081425] pnp: 00:09: iomem range 0xf8000-0xfffff could not be reserved
[ 13.081428] pnp: 00:09: iomem range 0xcc000-0xcffff has been reserved
[ 13.081727] PCI: Bridge: 0000:00:1e.0
[ 13.081731] IO window: a000-afff
[ 13.081737] MEM window: d0000000-d00fffff
[ 13.081741] PREFETCH window: disabled.
[ 13.081757] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 13.081767] NET: Registered protocol family 2
[ 13.082098] Time: tsc clocksource has been installed.
[ 13.110051] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 13.110137] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 13.110836] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 13.111067] TCP: Hash tables configured (established 131072 bind 65536)
[ 13.111070] TCP reno registered
[ 13.122159] checking if image is initramfs... it is
[ 13.740650] Freeing initrd memory: 7023k freed
[ 13.741045] audit: initializing netlink socket (disabled)
[ 13.741062] audit(1192047080.276:1): initialized
[ 13.743015] VFS: Disk quotas dquot_6.5.1
[ 13.743027] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 13.743165] io scheduler noop registered
[ 13.743168] io scheduler anticipatory registered
[ 13.743170] io scheduler deadline registered
[ 13.743186] io scheduler cfq registered (default)
[ 13.743198] Boot video device is 0000:00:02.0
[ 13.743379] isapnp: Scanning for PnP cards...
[ 14.094536] isapnp: No Plug & Play device found
[ 14.119350] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 14.119453] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 14.119627] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 14.120321] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 14.120605] 00:10: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 14.121253] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 14.121450] input: Macintosh mouse button emulation as /class/input/input0
[ 14.121533] PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
[ 14.121536] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 14.124105] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 14.124111] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 14.124286] mice: PS/2 mouse device common for all mice
[ 14.124399] EISA: Probing bus 0 at eisa.0
[ 14.124430] EISA: Detected 0 cards.
[ 14.124513] TCP cubic registered
[ 14.124524] NET: Registered protocol family 1
[ 14.124545] Using IPI Shortcut mode
[ 14.124624] Magic number: 11:513:194
[ 14.124689] hash matches device ttys6
[ 14.125075] Freeing unused kernel memory: 348k freed
[ 14.195911] input: AT Translated Set 2 keyboard as /class/input/input1
[ 15.331154] AppArmor: AppArmor initialized<5>audit(1192047081.868:2): type=1505 info="AppArmor initialized" pid=1127
[ 15.337602] fuse init (API version 7.8)
[ 15.342122] Failure registering capabilities with primary security module.
[ 15.373071] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 15.799479] usbcore: registered new interface driver usbfs
[ 15.799504] usbcore: registered new interface driver hub
[ 15.799528] usbcore: registered new device driver usb
[ 15.800310] USB Universal Host Controller Interface driver v3.0
[ 15.800374] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 15.800378] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 15.800534] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 15.800563] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b000
[ 15.800674] usb usb1: configuration #1 chosen from 1 choice
[ 15.800707] hub 1-0:1.0: USB hub found
[ 15.800713] hub 1-0:1.0: 2 ports detected
[ 15.861879] SCSI subsystem initialized
[ 15.867769] libata version 2.21 loaded.
[ 15.903361] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 15.903367] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 15.903393] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 15.903424] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 15.903524] usb usb2: configuration #1 chosen from 1 choice
[ 15.903553] hub 2-0:1.0: USB hub found
[ 15.903560] hub 2-0:1.0: 2 ports detected
[ 15.938577] 8139too Fast Ethernet driver 0.9.28
[ 16.007123] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 16.007129] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 16.007155] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 16.007185] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800
[ 16.007297] usb usb3: configuration #1 chosen from 1 choice
[ 16.007326] hub 3-0:1.0: USB hub found
[ 16.007333] hub 3-0:1.0: 2 ports detected
[ 16.020974] Floppy drive(s): fd0 is 1.44M
[ 16.053665] FDC 0 is a post-1991 82077
[ 16.110817] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 16.110823] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 16.110853] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 16.110883] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00
[ 16.110982] usb usb4: configuration #1 chosen from 1 choice
[ 16.111012] hub 4-0:1.0: USB hub found
[ 16.111020] hub 4-0:1.0: 2 ports detected
[ 16.215859] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 16.215865] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 16.215899] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 16.215936] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 16.215944] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd01c0000
[ 16.219825] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 16.246389] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 16.263381] usb usb5: configuration #1 chosen from 1 choice
[ 16.263416] hub 5-0:1.0: USB hub found
[ 16.263424] hub 5-0:1.0: 8 ports detected
[ 16.366361] ata_piix 0000:00:1f.2: version 2.11
[ 16.366368] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 16.366424] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 16.366503] scsi0 : ata_piix
[ 16.366547] scsi1 : ata_piix
[ 16.366574] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
[ 16.366578] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
[ 16.530018] ata1.00: ATA-7: HDS728080PLA380, PF2OA60A, max UDMA/133
[ 16.530023] ata1.00: 160836480 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 16.545970] ata1.00: configured for UDMA/133
[ 17.028706] ata2.00: ATAPI: CD-ROM F565E, 1.07, max UDMA/66
[ 17.028712] ata2.01: ATAPI: SAMSUNG CDRW/DVD SM-352B, T801, max UDMA/33
[ 17.028717] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 17.100274] usb 2-1: new low speed USB device using uhci_hcd and address 3
[ 17.200283] ata2.00: configured for UDMA/33
[ 17.275160] usb 2-1: configuration #1 chosen from 1 choice
[ 17.371881] ata2.01: configured for UDMA/33
[ 17.372004] scsi 0:0:0:0: Direct-Access ATA HDS728080PLA380 PF2O PQ: 0 ANSI: 5
[ 17.372611] scsi 1:0:0:0: CD-ROM CD-ROM F565E 1.07 PQ: 0 ANSI: 5
[ 17.373137] scsi 1:0:1:0: CD-ROM SAMSUNG CDRW/DVD SM-352B T801 PQ: 0 ANSI: 5
[ 17.375690] eth0: RealTek RTL8139 at 0xf0044000, 00:11:5b:e5:b8:d9, IRQ 20
[ 17.375694] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 17.378399] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 17.392421] sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
[ 17.392450] sd 0:0:0:0: [sda] Write Protect is off
[ 17.392454] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 17.392481] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.392537] sd 0:0:0:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
[ 17.392548] sd 0:0:0:0: [sda] Write Protect is off
[ 17.392551] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 17.392567] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.392571] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
[ 17.478264] sd 0:0:0:0: [sda] Attached SCSI disk
[ 17.482807] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 17.482937] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 17.483063] scsi 1:0:1:0: Attached scsi generic sg2 type 5
[ 17.508096] sr0: scsi3-mmc drive: 0x/40x cd/rw xa/form2 cdda tray
[ 17.508101] Uniform CD-ROM driver Revision: 3.20
[ 17.508330] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 17.511004] sr1: scsi3-mmc drive: 1x/52x writer cd/rw xa/form2 cdda tray
[ 17.511158] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 17.515293] usb 2-2: new full speed USB device using uhci_hcd and address 4
[ 17.712087] usb 2-2: configuration #1 chosen from 1 choice
[ 17.715124] usbcore: registered new interface driver hiddev
[ 17.728148] input: Logitech Optical USB Mouse as /class/input/input2
[ 17.728178] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-1
[ 17.728195] usbcore: registered new interface driver usbhid
[ 17.728198] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 17.796908] Attempting manual resume
[ 17.796912] swsusp: Resume From Partition 8:8
[ 17.796914] PM: Checking swsusp image.
[ 17.797074] PM: Resume from disk failed.
[ 17.830503] kjournald starting. Commit interval 5 seconds
[ 17.830514] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.758208] iTCO_vendor_support: vendor-support=0
[ 25.759058] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 25.759209] iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0460)
[ 25.759260] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 25.770466] intel_rng: FWH not detected
[ 26.032414] Linux agpgart interface v0.102 (c) Dave Jones
[ 26.106566] agpgart: Detected an Intel 915G Chipset.
[ 26.106966] agpgart: Detected 7932K stolen memory.
[ 26.123578] agpgart: AGP aperture is 256M @ 0xc0000000
[ 26.445164] input: PC Speaker as /class/input/input3
[ 26.476174] Linux video capture interface: v2.00
[ 26.491235] zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.07
[ 26.491284] usb 2-2: ZC0301[P] Image Processor and Control Chip detected (vid/pid 0x0AC8:0x303B)
[ 26.564090] usb 2-2: No supported image sensor detected
[ 26.564121] usbcore: registered new interface driver zc0301
[ 26.612933] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-386/media/gspcav1/gspca_core.c: USB SPCA5XX camera found.(ZC3XX)
[ 26.706808] Real Time Clock Driver v1.12ac
[ 26.837738] parport_pc 00:0f: reported by Plug and Play BIOS
[ 26.837859] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 26.955618] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 26.955691] saa7130[0]: found at 0000:01:01.0, rev: 1, irq: 18, latency: 32, mmio: 0xd0000000
[ 26.955699] saa7130[0]: subsystem: 1131:2001, board: 10MOONS PCI TV CAPTURE CARD [card=21,autodetected]
[ 26.955707] saa7130[0]: board init: gpio is 131ff
[ 27.126486] saa7130[0]: i2c eeprom 00: 31 11 01 20 08 20 1c 55 43 43 a9 1c 55 43 43 a9
[ 27.126497] saa7130[0]: i2c eeprom 10: ff ff 00 00 42 6f 73 65 72 73 73 37 31 33 30 ff
[ 27.126504] saa7130[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 27.126512] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 27.126519] saa7130[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 27.126527] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 27.126534] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 27.126541] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 27.179055] tuner 0-0060: All bytes are equal. It is not a TEA5767
[ 27.179061] tuner 0-0060: chip found @ 0xc0 (saa7130[0])
[ 27.179090] tuner 0-0060: type set to 37 (LG PAL (newer TAPC series))
[ 27.179094] tuner 0-0060: type set to 37 (LG PAL (newer TAPC series))
[ 27.199193] saa7130[0]: registered device video0 [v4l2]
[ 27.199235] saa7130[0]: registered device vbi0
[ 27.199272] saa7130[0]: registered device radio0
[ 27.213107] saa7134 ALSA driver for DMA sound loaded
[ 27.213136] saa7130[0]/alsa: saa7130[0] at 0xd0000000 irq 18 registered as card -2
[ 27.238697] usbcore: registered new interface driver gspca
[ 27.238703] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-386/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
[ 27.241188] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[ 27.562683] intel8x0_measure_ac97_clock: measured 54787 usecs
[ 27.562687] intel8x0: clocking to 48000
[ 28.916353] lp0: using parport0 (interrupt-driven).
[ 28.953310] Adding 1563148k swap on /dev/sda8. Priority:-1 extents:1 across:1563148k
[ 29.239647] EXT3 FS on sda9, internal journal
[ 34.844993] kjournald starting. Commit interval 5 seconds
[ 34.845127] EXT3 FS on sda7, internal journal
[ 34.845132] EXT3-fs: mounted filesystem with ordered data mode.
[ 36.443272] acpi_cpufreq: Unknown symbol acpi_processor_notify_smm
[ 36.443322] acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance
[ 36.443426] acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance
[ 36.443490] acpi_cpufreq: Unknown symbol acpi_processor_register_performance
[ 37.387878] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 37.764899] ppdev: user-space parallel port driver
[ 37.936670] audit(1192018305.110:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4426 profile="/usr/sbin/cupsd"
[ 38.011452] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 39.183291] Failure registering capabilities with primary security module.
[ 39.360799] Bluetooth: Core ver 2.11
[ 39.361042] NET: Registered protocol family 31
[ 39.361045] Bluetooth: HCI device and connection manager initialized
[ 39.361048] Bluetooth: HCI socket layer initialized
[ 39.377453] Bluetooth: L2CAP ver 2.8
[ 39.377458] Bluetooth: L2CAP socket layer initialized
[ 39.423547] Bluetooth: RFCOMM socket layer initialized
[ 39.423776] Bluetooth: RFCOMM TTY layer initialized
[ 39.423779] Bluetooth: RFCOMM ver 1.8
[ 41.461498] [drm] Initialized drm 1.1.0 20060810
[ 41.467407] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 43.430801] NET: Registered protocol family 17
[ 48.550404] NET: Registered protocol family 10
[ 48.550567] lo: Disabled Privacy Extensions
[ 59.029719] eth0: no IPv6 routers present
liu@liu-desktop:~$


=========================
:em42


_________________
向那些默默支持Ubuntu和Linux的兄弟致敬!
我的百度空间:
http://hi.baidu.com/%B0%A2%CC%B8


页首
 用户资料  
 
14 楼 
 文章标题 :
帖子发表于 : 2007-10-10 21:45 

注册: 2007-02-23 15:28
帖子: 90
送出感谢: 0 次
接收感谢: 0 次
安装新内核后,需要从新编译vbox的内核模块,只要卸载掉vbox,从新装一次就好。


页首
 用户资料  
 
15 楼 
 文章标题 :
帖子发表于 : 2007-10-11 0:33 
头像

注册: 2006-11-01 3:21
帖子: 253
送出感谢: 0 次
接收感谢: 0 次
leeaman 写道:
ltkun 写道:
710下没有内核模块 还是直接下载704的版本安装

引用:
根本就没有/etc/init.d/vboxdrv这个文件嘛Sad

我的7.10也是搞了几天,去官方网下7.04班的deb包应该没有问题,我是这样的

我的7.10也是这个样
不知道在搞什么,从源理安装的居然还不能用
也是去官方下载7.04的才搞定


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 16 篇帖子 ]  前往页数 1, 2  下一页

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 3 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译