PaperBus 2.0 (beta) 在 10.04.1 下安装问题，求解

[ChensPad]

我下载了PaperBus-2.0-Linux-x86-Install，然后在存放的目录执行了sudo ./PaperBus-2.0-Linux-x86-Install

结果不能安装终端显示如下：
application-specific initialization failed: Can't find a usable init.tcl in the following directories:
/installkitvfs/lib/tcl /installkitvfs/lib/tcl8.5 /home/damon/src/installkit/glibc24/out/lib/tcl8.5 /×××/lib/tcl8.5 /××/lib/tcl8.5 /×××/library /media/library /××/tcl8.5.7/library /tcl8.5.7/library

××、×××都是存放目录，我就没有贴出来了
安装了新立得管理器上所有版本的Tcl、Tcl-dev，还是不行，其实这个init.tcl已经有了，在/usr/share/tcltk/tcl8.3(4、5)下面。
内容如下：

# init.tcl --
#
# Default system startup file for Tcl-based applications. Defines
# "unknown" procedure and auto-load facilities.
#
# RCS: @(#) $Id: init.tcl,v 1.39.2.5 2002/06/21 19:11:10 dgp Exp $
#
# Copyright (c) 1991-1993 The Regents of the University of California.
# Copyright (c) 1994-1996 Sun Microsystems, Inc.
# Copyright (c) 1998-1999 Scriptics Corporation.
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#

if {[info commands package] == ""} {
error "version mismatch: library\nscripts expect Tcl version 7.5b1 or later but the loaded version is\nonly [info patchlevel]"
}
package require -exact Tcl 8.3

# Compute the auto path to use in this interpreter.
# The values on the path come from several locations:
#
# The environment variable TCLLIBPATH
#
# tcl_library, which is the directory containing this init.tcl script.
# tclInitScript.h searches around for the directory containing this
# init.tcl and defines tcl_library to that location before sourcing it.
#
# The parent directory of tcl_library. Adding the parent
# means that packages in peer directories will be found automatically.
#
# Also add the directory ../lib relative to the directory where the
# executable is located. This is meant to find binary packages for the
# same architecture as the current executable.
#
# tcl_pkgPath, which is set by the platform-specific initialization routines
# On UNIX it is compiled in
# On Windows, it is not used
# On Macintosh it is "Tool Command Language" in the Extensions folder

if {![info exists auto_path]} {
if {[info exist env(TCLLIBPATH)]} {
set auto_path $env(TCLLIBPATH)
} else {
set auto_path ""
}
}
namespace eval tcl {
variable Dir
if {[string compare [info library] {}]} {
foreach Dir [list [info library]] {
if {[lsearch -exact $::auto_path $Dir] < 0} {
lappend ::auto_path $Dir
}
}
}
set Dir [file join [file dirname [file dirname \
[info nameofexecutable]]] lib]
if {[lsearch -exact $::auto_path $Dir] < 0} {
lappend ::auto_path $Dir
}
if {[info exist ::tcl_pkgPath]} {
foreach Dir $::tcl_pkgPath {
if {[lsearch -exact $::auto_path $Dir] < 0} {
lappend ::auto_path $Dir
}
}
}
}

# Windows specific end of initialization

if {(![interp issafe]) && [string equal $tcl_platform(platform) "windows"]} {
namespace eval tcl {
proc EnvTraceProc {lo n1 n2 op} {
set x $::env($n2)
set ::env($lo) $x
set ::env([string toupper $lo]) $x
}
proc InitWinEnv {} {
global env tcl_platform
foreach p [array names env] {
set u [string toupper $p]
if {[string compare $u $p]} {
switch -- $u {
COMSPEC -
PATH {
if {![info exists env($u)]} {
set env($u) $env($p)
}
trace variable env($p) w \
[namespace code [list EnvTraceProc $p]]
trace variable env($u) w \
[namespace code [list EnvTraceProc $p]]
}
}
}
}
if {![info exists env(COMSPEC)]} {
if {[string equal $tcl_platform(os) "Windows NT"]} {
set env(COMSPEC) cmd.exe
} else {
set env(COMSPEC) command.com
}
}
}
InitWinEnv
}
}

# Setup the unknown package handler

package unknown tclPkgUnknown

# Conditionalize for presence of exec.

if {[llength [info commands exec]] == 0} {

# Some machines, such as the Macintosh, do not have exec. Also, on all
# platforms, safe interpreters do not have exec.

set auto_noexec 1
}
set errorCode ""
set errorInfo ""

# Define a log command (which can be overwitten to log errors
# differently, specially when stderr is not available)

if {[llength [info commands tclLog]] == 0} {
proc tclLog {string} {
catch {puts stderr $string}
}
}

# unknown --
# This procedure is called when a Tcl command is invoked that doesn't
# exist in the interpreter. It takes the following steps to make the
# command available:
#
# 1. See if the command has the form "namespace inscope ns cmd" and
# if so, concatenate its arguments onto the end and evaluate it.
# 2. See if the autoload facility can locate the command in a
# Tcl script file. If so, load it and execute it.
# 3. If the command was invoked interactively at top-level:
# (a) see if the command exists as an executable UNIX program.
# If so, "exec" the command.
# (b) see if the command requests csh-like history substitution
# in one of the common forms !!, !<number>, or ^old^new. If
# so, emulate csh's history substitution.
# (c) see if the command is a unique abbreviation for another
# command. If so, invoke the command.
#
# Arguments:
# args - A list whose elements are the words of the original
# command, including the command name.

proc unknown args {
global auto_noexec auto_noload env unknown_pending tcl_interactive
global errorCode errorInfo

# If the command word has the form "namespace inscope ns cmd"
# then concatenate its arguments onto the end and evaluate it.

set cmd [lindex $args 0]
if {[regexp "^namespace\[ \t\n\]+inscope" $cmd] && [llength $cmd] == 4} {
set arglist [lrange $args 1 end]
set ret [catch {uplevel 1 ::$cmd $arglist} result]
if {$ret == 0} {
return $result
} else {
return -code $ret -errorcode $errorCode $result
}
}

# Save the values of errorCode and errorInfo variables, since they
# may get modified if caught errors occur below. The variables will
# be restored just before re-executing the missing command.

set savedErrorCode $errorCode
set savedErrorInfo $errorInfo
set name [lindex $args 0]
if {![info exists auto_noload]} {
#
# Make sure we're not trying to load the same proc twice.
#
if {[info exists unknown_pending($name)]} {
return -code error "self-referential recursion in \"unknown\" for command \"$name\"";
}
set unknown_pending($name) pending;
set ret [catch {auto_load $name [uplevel 1 {::namespace current}]} msg]
unset unknown_pending($name);
if {$ret != 0} {
append errorInfo "\n (autoloading \"$name\")"
return -code $ret -errorcode $errorCode -errorinfo $errorInfo $msg
}
if {![array size unknown_pending]} {
unset unknown_pending
}
if {$msg} {
set errorCode $savedErrorCode
set errorInfo $savedErrorInfo
set code [catch {uplevel 1 $args} msg]
if {$code == 1} {
#
# Strip the last five lines off the error stack (they're
# from the "uplevel" command).
#

set new [split $errorInfo \n]
set new [join [lrange $new 0 [expr {[llength $new] - 6}]] \n]
return -code error -errorcode $errorCode \
-errorinfo $new $msg
} else {
return -code $code $msg
}
}
}

if {([info level] == 1) && [string equal [info script] ""] \
&& [info exists tcl_interactive] && $tcl_interactive} {
if {![info exists auto_noexec]} {
set new [auto_execok $name]
if {[string compare {} $new]} {
set errorCode $savedErrorCode
set errorInfo $savedErrorInfo
set redir ""
if {[string equal [info commands console] ""]} {
set redir ">&@stdout <@stdin"
}
return [uplevel 1 exec $redir $new [lrange $args 1 end]]
}
}
set errorCode $savedErrorCode
set errorInfo $savedErrorInfo
if {[string equal $name "!!"]} {
set newcmd [history event]
} elseif {[regexp {^!(.+)$} $name dummy event]} {
set newcmd [history event $event]
} elseif {[regexp {^\^([^^]*)\^([^^]*)\^?$} $name dummy old new]} {
set newcmd [history event -1]
catch {regsub -all -- $old $newcmd $new newcmd}
}
if {[info exists newcmd]} {
tclLog $newcmd
history change $newcmd 0
return [uplevel 1 $newcmd]
}

set ret [catch {set cmds [info commands $name*]} msg]
if {[string equal $name "::"]} {
set name ""
}
if {$ret != 0} {
return -code $ret -errorcode $errorCode \
"error in unknown while checking if \"$name\" is a unique command abbreviation: $msg"
}
if {[llength $cmds] == 1} {
return [uplevel 1 [lreplace $args 0 0 $cmds]]
}
if {[llength $cmds]} {
if {[string equal $name ""]} {
return -code error "empty command name \"\""
} else {
return -code error \
"ambiguous command name \"$name\": [lsort $cmds]"
}
}
}
return -code error "invalid command name \"$name\""
}

# auto_load --
# Checks a collection of library directories to see if a procedure
# is defined in one of them. If so, it sources the appropriate
# library file to create the procedure. Returns 1 if it successfully
# loaded the procedure, 0 otherwise.
#
# Arguments:
# cmd - Name of the command to find and load.
# namespace (optional) The namespace where the command is being used - must be
# a canonical namespace as returned [namespace current]
# for instance. If not given, namespace current is used.

proc auto_load {cmd {namespace {}}} {
global auto_index auto_oldpath auto_path

if {[string length $namespace] == 0} {
set namespace [uplevel 1 [list ::namespace current]]
}
set nameList [auto_qualify $cmd $namespace]
# workaround non canonical auto_index entries that might be around
# from older auto_mkindex versions
lappend nameList $cmd
foreach name $nameList {
if {[info exists auto_index($name)]} {
uplevel #0 $auto_index($name)
return [expr {[info commands $name] != ""}]
}
}
if {![info exists auto_path]} {
return 0
}

if {![auto_load_index]} {
return 0
}
foreach name $nameList {
if {[info exists auto_index($name)]} {
uplevel #0 $auto_index($name)
# There's a couple of ways to look for a command of a given
# name. One is to use
# info commands $name
# Unfortunately, if the name has glob-magic chars in it like *
# or [], it may not match. For our purposes here, a better
# route is to use
# namespace which -command $name
if { ![string equal [namespace which -command $name] ""] } {
return 1
}
}
}
return 0
}

# auto_load_index --
# Loads the contents of tclIndex files on the auto_path directory
# list. This is usually invoked within auto_load to load the index
# of available commands. Returns 1 if the index is loaded, and 0 if
# the index is already loaded and up to date.
#
# Arguments:
# None.

proc auto_load_index {} {
global auto_index auto_oldpath auto_path errorInfo errorCode

if {[info exists auto_oldpath] && \
[string equal $auto_oldpath $auto_path]} {
return 0
}
set auto_oldpath $auto_path

# Check if we are a safe interpreter. In that case, we support only
# newer format tclIndex files.

set issafe [interp issafe]
for {set i [expr {[llength $auto_path] - 1}]} {$i >= 0} {incr i -1} {
set dir [lindex $auto_path $i]
set f ""
if {$issafe} {
catch {source [file join $dir tclIndex]}
} elseif {[catch {set f [open [file join $dir tclIndex]]}]} {
continue
} else {
set error [catch {
set id [gets $f]
if {[string equal $id \
"# Tcl autoload index file, version 2.0"]} {
eval [read $f]
} elseif {[string equal $id "# Tcl autoload index file: each line identifies a Tcl"]} {
while {[gets $f line] >= 0} {
if {[string equal [string index $line 0] "#"] \
|| ([llength $line] != 2)} {
continue
}
set name [lindex $line 0]
set auto_index($name) \
"source [file join $dir [lindex $line 1]]"
}
} else {
error "[file join $dir tclIndex] isn't a proper Tcl index file"
}
} msg]
if {[string compare $f ""]} {
close $f
}
if {$error} {
error $msg $errorInfo $errorCode
}
}
}
return 1
}

# auto_qualify --
#
# Compute a fully qualified names list for use in the auto_index array.
# For historical reasons, commands in the global namespace do not have leading
# :: in the index key. The list has two elements when the command name is
# relative (no leading ::) and the namespace is not the global one. Otherwise
# only one name is returned (and searched in the auto_index).
#
# Arguments -
# cmd The command name. Can be any name accepted for command
# invocations (Like "foo::::bar").
# namespace The namespace where the command is being used - must be
# a canonical namespace as returned by [namespace current]
# for instance.

proc auto_qualify {cmd namespace} {

# count separators and clean them up
# (making sure that foo:::::bar will be treated as foo::bar)
set n [regsub -all {::+} $cmd :: cmd]

# Ignore namespace if the name starts with ::
# Handle special case of only leading ::

# Before each return case we give an example of which category it is
# with the following form :
# ( inputCmd, inputNameSpace) -> output

if {[regexp {^::(.*)$} $cmd x tail]} {
if {$n > 1} {
# ( ::foo::bar , * ) -> ::foo::bar
return [list $cmd]
} else {
# ( ::global , * ) -> global
return [list $tail]
}
}

# Potentially returning 2 elements to try :
# (if the current namespace is not the global one)

if {$n == 0} {
if {[string equal $namespace ::]} {
# ( nocolons , :: ) -> nocolons
return [list $cmd]
} else {
# ( nocolons , ::sub ) -> ::sub::nocolons nocolons
return [list ${namespace}::$cmd $cmd]
}
} elseif {[string equal $namespace ::]} {
# ( foo::bar , :: ) -> ::foo::bar
return [list ::$cmd]
} else {
# ( foo::bar , ::sub ) -> ::sub::foo::bar ::foo::bar
return [list ${namespace}::$cmd ::$cmd]
}
}

# auto_import --
#
# Invoked during "namespace import" to make see if the imported commands
# reside in an autoloaded library. If so, the commands are loaded so
# that they will be available for the import links. If not, then this
# procedure does nothing.
#
# Arguments -
# pattern The pattern of commands being imported (like "foo::*")
# a canonical namespace as returned by [namespace current]

proc auto_import {pattern} {
global auto_index

# If no namespace is specified, this will be an error case

if {![string match *::* $pattern]} {
return
}

set ns [uplevel 1 [list ::namespace current]]
set patternList [auto_qualify $pattern $ns]

auto_load_index

foreach pattern $patternList {
foreach name [array names auto_index $pattern] {
if {[string equal "" [info commands $name]]
&& [string equal [namespace qualifiers $pattern] \
[namespace qualifiers $name]]} {
uplevel #0 $auto_index($name)
}
}
}
}

# auto_execok --
#
# Returns string that indicates name of program to execute if
# name corresponds to a shell builtin or an executable in the
# Windows search path, or "" otherwise. Builds an associative
# array auto_execs that caches information about previous checks,
# for speed.
#
# Arguments:
# name - Name of a command.

if {[string equal windows $tcl_platform(platform)]} {
# Windows version.
#
# Note that info executable doesn't work under Windows, so we have to
# look for files with .exe, .com, or .bat extensions. Also, the path
# may be in the Path or PATH environment variables, and path
# components are separated with semicolons, not colons as under Unix.
#
proc auto_execok name {
global auto_execs env tcl_platform

if {[info exists auto_execs($name)]} {
return $auto_execs($name)
}
set auto_execs($name) ""

set shellBuiltins [list cls copy date del erase dir echo mkdir \
md rename ren rmdir rd time type ver vol]
if {[string equal $tcl_platform(os) "Windows NT"]} {
# NT includes the 'start' built-in
lappend shellBuiltins "start"
}
if {[info exists env(PATHEXT)]} {
# Add an initial ; to have the {} extension check first.
set execExtensions [split ";$env(PATHEXT)" ";"]
} else {
set execExtensions [list {} .com .exe .bat]
}

if {[lsearch -exact $shellBuiltins $name] != -1} {
# When this is command.com for some reason on Win2K, Tcl won't
# exec it unless the case is right, which this corrects. COMSPEC
# may not point to a real file, so do the check.
set cmd $env(COMSPEC)
if {[file exists $cmd]} {
set cmd [file attributes $cmd -shortname]
}
return [set auto_execs($name) [list $cmd /c $name]]
}

if {[llength [file split $name]] != 1} {
foreach ext $execExtensions {
set file ${name}${ext}
if {[file exists $file] && ![file isdirectory $file]} {
return [set auto_execs($name) [list $file]]
}
}
return ""
}

set path "[file dirname [info nameof]];.;"
if {[info exists env(WINDIR)]} {
set windir $env(WINDIR)
}
if {[info exists windir]} {
if {[string equal $tcl_platform(os) "Windows NT"]} {
append path "$windir/system32;"
}
append path "$windir/system;$windir;"
}

foreach var {PATH Path path} {
if {[info exists env($var)]} {
append path ";$env($var)"
}
}

foreach dir [split $path {;}] {
# Skip already checked directories
if {[info exists checked($dir)] || [string equal {} $dir]} { continue }
set checked($dir) {}
foreach ext $execExtensions {
set file [file join $dir ${name}${ext}]
if {[file exists $file] && ![file isdirectory $file]} {
return [set auto_execs($name) [list $file]]
}
}
}
return ""
}

} else {
# Unix version.
#
proc auto_execok name {
global auto_execs env

if {[info exists auto_execs($name)]} {
return $auto_execs($name)
}
set auto_execs($name) ""
if {[llength [file split $name]] != 1} {
if {[file executable $name] && ![file isdirectory $name]} {
set auto_execs($name) [list $name]
}
return $auto_execs($name)
}
foreach dir [split $env(PATH) :] {
if {[string equal $dir ""]} {
set dir .
}
set file [file join $dir $name]
if {[file executable $file] && ![file isdirectory $file]} {
set auto_execs($name) [list $file]
return $auto_execs($name)
}
}
return ""
}

}
但是建立了一个目录、复制init.tcl过去后，安装程序照样先显示找不着，在显示找到了刚刚人工复制过去的文件，然后显示运行错误：
application-specific initialization failed: Can't find a usable init.tcl in the following directories:
/installkitvfs/lib/tcl /installkitvfs/lib/tcl8.5 /home/damon/src/installkit/glibc24/out/lib/tcl8.5 /media/Media/lib/tcl8.5 /media/lib/tcl8.5 /media/Media/library /media/library /media/tcl8.5.7/library /tcl8.5.7/library

/installkitvfs/lib/tcl/init.tcl: version conflict for package "Tcl": have 8.5.7, need exactly 8.3
version conflict for package "Tcl": have 8.5.7, need exactly 8.3
while executing
"package require -exact Tcl 8.3"
(file "/installkitvfs/lib/tcl/init.tcl" line 19)
invoked from within
"source /installkitvfs/lib/tcl/init.tcl"
("uplevel" body line 1)
invoked from within
"uplevel #0 [list source $tclfile]"


This probably means that Tcl wasn't installed properly.

%

这个Tcl到底是什么错误啊？求解，求高人出手解决。
（软件用途，你们懂的）

[redoak]

这软件干什么用的？

[ChensPad]

免费代理，在Windows下面可以使用，但是在Ubuntu 10.04下面根本装不上。