安装前可以的
mplayer设置vo=xv
谢谢
[问题]mplayer在安装ati 8.4驱动后无法播放视频
-
- 帖子: 34
- 注册时间: 2007-04-06 21:52
-
- 帖子: 34
- 注册时间: 2007-04-06 21:52
错误代码:
MPlayer 1.0rc2-4.2.3 (C) 2000-2007 MPlayer Team
CPU: Intel(R) Pentium(R) M processor 1.73GHz (Family: 6, Model: 13, Stepping: 8)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
xscreensaver_disable: Could not find XScreenSaver window.
GNOME screensaver disabled
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing /home/xuxin/Videos/Codec Check/MP43_MP3.avi.
AVI file format detected.
[aviheader] Video stream found, -vid 0
[aviheader] Audio stream found, -aid 1
VIDEO: [MP43] 640x480 24bpp 25.000 fps 309.3 kbps (37.8 kbyte/s)
xscreensaver_disable: Could not find XScreenSaver window.
GNOME screensaver disabled
[VO_XV] It seems there is no Xvideo support for your video card available.
[VO_XV] Run 'xvinfo' to verify its Xv support and read
[VO_XV] DOCS/HTML/en/video.html#xv!
[VO_XV] See 'mplayer -vo help' for other (non-xv) video out drivers.
[VO_XV] Try -vo x11.
Error opening/initializing the selected video_out (-vo) device.
==========================================================================
Forced audio codec: mad
Opening audio decoder: [libmad] libmad mpeg audio decoder
AUDIO: 44100 Hz, 2 ch, s16le, 128.0 kbit/9.07% (ratio: 16000->176400)
Selected audio codec: [mad] afm: libmad (libMAD MPEG layer 1-2-3)
==========================================================================
AO: [pulse] 44100Hz 2ch s16le (2 bytes per sample)
Video: no video
Starting playback...
A: 0.0 (00.0) of 154.3 (02:34.2) ??,?%
[1]+ Stopped gmplayer
MPlayer 1.0rc2-4.2.3 (C) 2000-2007 MPlayer Team
CPU: Intel(R) Pentium(R) M processor 1.73GHz (Family: 6, Model: 13, Stepping: 8)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
xscreensaver_disable: Could not find XScreenSaver window.
GNOME screensaver disabled
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing /home/xuxin/Videos/Codec Check/MP43_MP3.avi.
AVI file format detected.
[aviheader] Video stream found, -vid 0
[aviheader] Audio stream found, -aid 1
VIDEO: [MP43] 640x480 24bpp 25.000 fps 309.3 kbps (37.8 kbyte/s)
xscreensaver_disable: Could not find XScreenSaver window.
GNOME screensaver disabled
[VO_XV] It seems there is no Xvideo support for your video card available.
[VO_XV] Run 'xvinfo' to verify its Xv support and read
[VO_XV] DOCS/HTML/en/video.html#xv!
[VO_XV] See 'mplayer -vo help' for other (non-xv) video out drivers.
[VO_XV] Try -vo x11.
Error opening/initializing the selected video_out (-vo) device.
==========================================================================
Forced audio codec: mad
Opening audio decoder: [libmad] libmad mpeg audio decoder
AUDIO: 44100 Hz, 2 ch, s16le, 128.0 kbit/9.07% (ratio: 16000->176400)
Selected audio codec: [mad] afm: libmad (libMAD MPEG layer 1-2-3)
==========================================================================
AO: [pulse] 44100Hz 2ch s16le (2 bytes per sample)
Video: no video
Starting playback...
A: 0.0 (00.0) of 154.3 (02:34.2) ??,?%
[1]+ Stopped gmplayer
-
- 帖子: 34
- 注册时间: 2007-04-06 21:52
/etc/mplayer/mplayer.conf 文件内容
#
# MPlayer configuration file
#
# Configuration files are read system-wide from /usr/local/etc/mplayer.conf
# and per user from ~/.mplayer/config, where per-user settings override
# system-wide settings, all of which are overrriden by the command line.
#
# The configuration file settings are the same as the command line
# options without the preceding '-'.
#
# See the CONFIGURATION FILES section in the man page
# for a detailed description of the syntax.
##################
# video settings #
##################
# Specify default video driver (see -vo help for a list).
vo=xv
# Use SDL video with the aalib subdriver by default.
#vo = sdl:aalib
# FBdev driver:
#
# mode to use (read from fb.modes)
#fbmode = 640x480-120
#
# location of the fb.modes file
#fbmodeconfig = /etc/fb.modes
# Specify your monitor timings for the vesa and fbdev video output drivers.
# See /etc/X11/XF86Config for timings. Be careful; if you specify settings
# that exceed the capabilities of your monitor, you may damage it.
#
# horizontal frequency range (k stands for 1000)
#monitor-hfreq = 31.5k-50k,70k
#
# vertical frequency range
#monitor-vfreq = 50-90
#
# dotclock (or pixelclock) range (m stands for 1000000)
#monitor-dotclock = 30M-300M
# Start in fullscreen mode by default.
#fs=yes
# Change to a different videomode when going fullscreen.
#vm=yes
# Override the autodetected color depth, may need 'vm=yes' as well.
#bpp=0
# Enable software scaling (powerful CPU needed) for video output
# drivers that do not support hardware scaling.
#zoom=yes
# standard monitor size, with square pixels
#monitoraspect=4:3
# Use this for a widescreen monitor, non-square pixels.
#monitoraspect=16:9
# Keep the player window on top of all other windows.
#ontop=yes
##################
# audio settings #
##################
# Specify default audio driver (see -ao help for a list).
ao=pulse,alsa,
# Use SDL audio driver with the esd subdriver by default.
#ao = sdl:esd
# Specify the mixer device.
#mixer = /dev/mixer
# Resample the sound to 44100Hz with the lavcresample audio filter.
#af=lavcresample=44100
# Specify default audio codec (see -ac help for a list).
ac=mad,
##################
# other settings #
##################
# Drop frames to preserve audio/video sync.
#framedrop = yes
# Specify your preferred skin here (skins are searched for in
# /usr/local/share/mplayer/skins/<name> and ~/.mplayer/skins/<name>).
#skin = Abyss
# Resample the font alphamap.
# 0 plain white fonts
# 0.75 very narrow black outline (default)
# 1 narrow black outline
# 10 bold black outline
#ffactor = 0.75
# cache settings
#
# Use 8MB input cache by default.
#cache = 8192
#
# Prefill 20% of the cache before starting playback.
#cache-min = 20.0
#
# Prefill 50% of the cache before restarting playback after the cache emptied.
#cache-seek-min = 50
# DVD: Display English subtitles if available.
#slang = en
# DVD: Play English audio tracks if available.
#alang = en
# You can also include other configuration files.
#include = /path/to/the/file/you/want/to/include
#Screensaver support (for non gmplayer)
stop-xscreensaver = "yes"
#Disable joystick support
#It seems to cause very odd problems on laptops
#With accelerometers (See LP: #75925)
nojoystick = yes
#
# MPlayer configuration file
#
# Configuration files are read system-wide from /usr/local/etc/mplayer.conf
# and per user from ~/.mplayer/config, where per-user settings override
# system-wide settings, all of which are overrriden by the command line.
#
# The configuration file settings are the same as the command line
# options without the preceding '-'.
#
# See the CONFIGURATION FILES section in the man page
# for a detailed description of the syntax.
##################
# video settings #
##################
# Specify default video driver (see -vo help for a list).
vo=xv
# Use SDL video with the aalib subdriver by default.
#vo = sdl:aalib
# FBdev driver:
#
# mode to use (read from fb.modes)
#fbmode = 640x480-120
#
# location of the fb.modes file
#fbmodeconfig = /etc/fb.modes
# Specify your monitor timings for the vesa and fbdev video output drivers.
# See /etc/X11/XF86Config for timings. Be careful; if you specify settings
# that exceed the capabilities of your monitor, you may damage it.
#
# horizontal frequency range (k stands for 1000)
#monitor-hfreq = 31.5k-50k,70k
#
# vertical frequency range
#monitor-vfreq = 50-90
#
# dotclock (or pixelclock) range (m stands for 1000000)
#monitor-dotclock = 30M-300M
# Start in fullscreen mode by default.
#fs=yes
# Change to a different videomode when going fullscreen.
#vm=yes
# Override the autodetected color depth, may need 'vm=yes' as well.
#bpp=0
# Enable software scaling (powerful CPU needed) for video output
# drivers that do not support hardware scaling.
#zoom=yes
# standard monitor size, with square pixels
#monitoraspect=4:3
# Use this for a widescreen monitor, non-square pixels.
#monitoraspect=16:9
# Keep the player window on top of all other windows.
#ontop=yes
##################
# audio settings #
##################
# Specify default audio driver (see -ao help for a list).
ao=pulse,alsa,
# Use SDL audio driver with the esd subdriver by default.
#ao = sdl:esd
# Specify the mixer device.
#mixer = /dev/mixer
# Resample the sound to 44100Hz with the lavcresample audio filter.
#af=lavcresample=44100
# Specify default audio codec (see -ac help for a list).
ac=mad,
##################
# other settings #
##################
# Drop frames to preserve audio/video sync.
#framedrop = yes
# Specify your preferred skin here (skins are searched for in
# /usr/local/share/mplayer/skins/<name> and ~/.mplayer/skins/<name>).
#skin = Abyss
# Resample the font alphamap.
# 0 plain white fonts
# 0.75 very narrow black outline (default)
# 1 narrow black outline
# 10 bold black outline
#ffactor = 0.75
# cache settings
#
# Use 8MB input cache by default.
#cache = 8192
#
# Prefill 20% of the cache before starting playback.
#cache-min = 20.0
#
# Prefill 50% of the cache before restarting playback after the cache emptied.
#cache-seek-min = 50
# DVD: Display English subtitles if available.
#slang = en
# DVD: Play English audio tracks if available.
#alang = en
# You can also include other configuration files.
#include = /path/to/the/file/you/want/to/include
#Screensaver support (for non gmplayer)
stop-xscreensaver = "yes"
#Disable joystick support
#It seems to cause very odd problems on laptops
#With accelerometers (See LP: #75925)
nojoystick = yes
-
- 帖子: 34
- 注册时间: 2007-04-06 21:52
/etc/X11/xorg.conf
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Synaptics Touchpad"
EndSection
Section "Files"
EndSection
Section "Module"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Synaptics Touchpad"
EndSection
Section "Files"
EndSection
Section "Module"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
- command
- 帖子: 306
- 注册时间: 2007-10-14 0:50
- 来自: GUCAS
-
- 帖子: 34
- 注册时间: 2007-04-06 21:52
- xiaobaidhas
- 帖子: 55
- 注册时间: 2007-10-22 22:29