当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 8 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : 跪求编译mplayer时的报错问题解决
帖子发表于 : 2008-11-09 18:10 

注册: 2008-01-01 15:37
帖子: 15
送出感谢: 0 次
接收感谢: 0 次
大家好,我最近一直在装mplayer,原来可以很好安装上,播放也很正常,但现在用8。10就出问题了,不知道怎么回事。为了让大家能看明白我把具体的输出也复制过来了,如果没必要就不用看代码,帖子最后红色显示的代码才是报错的地方,过程是这样的。
在进入安装后在终端敲命令;

cd /home/wp/public/MPlayer-1.0rc2
./configure --enable-gui --enable-largefiles --language=zh_CN,en --enable-menu --enable-alsa
这一步是没有问题的 。可以看执行结果如下:
Detected operating system: Linux
Detected host architecture: i386
Checking for cc version ... 4.3.2, ok
Checking for host cc ... cc
Checking for cross compilation ... no
Checking for CPU vendor ... GenuineIntel (6:15:13)
Checking for CPU type ... Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz
Checking for kernel support of mmx ... yes
Checking for kernel support of mmxext ... yes
Checking for kernel support of sse ... yes
Checking for kernel support of sse2 ... yes
Checking for kernel support of ssse3 ... yes
Checking for kernel support of cmov ... yes
Checking for mtrr support ... yes
Checking for GCC & CPU optimization abilities ... native
Checking for assembler support of -pipe option ... yes
Checking for compiler support of named assembler arguments ... yes
Checking for assembler (as ) ... ok
Checking for .align is a power of two ... no
Checking for Linux kernel version ... 2.6.27-7-generic, ok
Checking for -lposix ... no
Checking for -lm ... yes
Checking for langinfo ... yes
Checking for language ... using zh_CN (man pages: en en )
Checking for enable sighandler ... yes
Checking for runtime cpudetection ... no
Checking for restrict keyword ... __restrict
Checking for __builtin_expect ... yes
Checking for kstat ... no
Checking for posix4 ... no
Checking for lrintf ... yes
Checking for mkstemp ... yes
Checking for nanosleep ... yes
Checking for socklib ... yes
Checking for inet_pton() ... yes (using )
Checking for network ... yes
Checking for inttypes.h (required) ... yes
Checking for int_fastXY_t in inttypes.h ... yes
Checking for word size ... 32
Checking for malloc.h ... yes
Checking for memalign() ... yes
Checking for alloca.h ... yes
Checking for mman.h ... yes
Checking for dynamic loader ... yes
Checking for dynamic a/v plugins support ... no
Checking for pthread ... yes (using -lpthread)
Checking for w32threads ... no (using pthread instead)
Checking for rpath ... no
Checking for iconv ... yes
Checking for soundcard.h ... yes (sys/soundcard.h)
Checking for sys/dvdio.h ... no
Checking for sys/cdio.h ... no
Checking for linux/cdrom.h ... yes
Checking for dvd.h ... no
Checking for termcap ... no
Checking for termios ... yes (sys/termios.h)
Checking for shm ... yes
Checking for strsep() ... yes
Checking for vsscanf() ... yes
Checking for swab() ... yes
Checking for POSIX select() ... yes
Checking for gettimeofday() ... yes
Checking for glob() ... yes
Checking for setenv() ... yes
Checking for sys/sysinfo.h ... yes
Checking for pkg-config ... yes
Checking for Samba support (libsmbclient) ... no
Checking for tdfxfb ... no
Checking for s3fb ... no
Checking for tdfxvid ... no
Checking for xvr100 ... no
Checking for tga ... yes
Checking for md5sum support ... yes
Checking for bl ... no
Checking for DirectFB ... no
Checking for X11 headers presence ... yes
Checking for X11 ... yes
Checking for DPMS ... yes (using Xdpms 4)
Checking for Xv ... yes
Checking for XvMC ... no
Checking for Xinerama ... yes
Checking for Xxf86vm ... no
Checking for XF86keysym ... yes
Checking for DGA ... no
Checking for 3dfx ... no
Checking for OpenGL ... no
Checking for VIDIX ... yes (internal)
Checking for /dev/mga_vid ... no
Checking for xmga ... no
Checking for GGI ... no
Checking for GGI extension: libggiwmh ... no
Checking for AA ... no
Checking for CACA ... no
Checking for SVGAlib ... no
Checking for FBDev ... yes
Checking for DVB ... no
Checking for DVB HEAD ... yes
Checking for zr ... no
Checking for PNG support ... yes
Checking for JPEG support ... no
Checking for PNM support ... yes
Checking for GIF support ... no
Checking for VESA support ... no
Checking for SDL ... no
Checking for NAS ... no
Checking for DXR2 ... no
Checking for DXR3/H+ ... no
Checking for IVTV TV-Out(pre linux-2.6.24) ... no
Checking for V4L2 MPEG Decoder ... yes
Checking for OSS Audio ... yes
Checking for aRts ... no
Checking for EsounD ... no
Checking for Polyp ... no
Checking for JACK ... no
Checking for OpenAL ... no
Checking for ALSA audio ... yes (using alsa 1.0.x and alsa/asoundlib.h)
Checking for Sun audio ... no
Checking for VCD support ... yes
Checking for dvdread ... yes (internal)
Checking for internal libdvdcss ... yes
Checking for cdparanoia ... no
Checking for libcdio ... no
Checking for bitmap font support ... yes
Checking for freetype >= 2.0.9 ... yes
Checking for fontconfig ... yes
Checking for SSA/ASS support ... yes
Checking for fribidi with charsets ... no
Checking for ENCA ... no
Checking for zlib ... yes
Checking for RTC ... yes
Checking for liblzo2 support ... no
Checking for mad support ... no
Checking for Twolame ... no
Checking for Toolame ... no
Checking for OggVorbis support ... yes (internal Tremor)
Checking for libspeex (version >= 1.1 required) ... no
Checking for OggTheora support ... no
Checking for internal mp3lib support ... yes
Checking for internal liba52 support ... yes
Checking for libdca support ... no
Checking for internal libmpeg2 support ... yes
Checking for libmpcdec (musepack, version >= 1.2.1 required) ... no
Checking for FAAC (AAC encoder) support ... no (in libavcodec: )
Checking for FAAD2 (AAC) support ... yes (internal floating-point)
Checking for LADSPA plugin support ... no
Checking for Win32 codecs ... yes (using /usr/local/lib/codecs)
Checking for XAnim codecs ... yes (using /usr/local/lib/codecs)
Checking for RealPlayer codecs ... yes (using /usr/local/lib/codecs)
Checking for QuickTime codecs ... yes
Checking for Nemesi Streaming Media libraries ... no
Checking for LIVE555 Streaming Media libraries ... no
Checking for FFmpeg libavutil ... yes (static)
Checking for FFmpeg libavcodec ... yes (static)
Checking for FFmpeg libavformat ... yes (static)
Checking for FFmpeg libpostproc ... yes (static)
Checking for libamr narrowband ... no
Checking for libamr wideband ... no
Checking for libdv-0.9.5+ ... no
Checking for XviD ... no
Checking for x264 ... no (in libavcodec: no)
Checking for libnut ... no
Checking for libmp3lame (for mencoder) ... no
Checking for mencoder ... yes
Checking for fastmemcpy ... yes
Checking for UniquE RAR File Library ... yes
Checking for TV interface ... yes
Checking for Video 4 Linux TV interface ... yes
Checking for Video 4 Linux 2 TV interface ... yes
Checking for TV teletext interface ... yes
Checking for Radio interface ... no
Checking for Capture for Radio interface ... no
Checking for Video 4 Linux 2 Radio interface ... no
Checking for Video 4 Linux Radio interface ... no
Checking for Video 4 Linux 2 MPEG PVR interface ... yes
Checking for audio select() ... yes
Checking for ftp ... yes
Checking for vstream client ... no
Checking for byte order ... little-endian
Checking for OSD menu ... yes
Checking for Subtitles sorting ... yes
Checking for XMMS inputplugin support ... no
Checking for inet6 ... yes
Checking for gethostbyname2 ... yes
Checking for GUI ... yes
Checking for XShape extension ... yes
Checking for GTK+ version ... 2.14.4
Checking for glib version ... 2.18.2
Checking for automatic gdb attach ... no
Checking for compiler support for noexecstack ... yes
Checking for joystick ... no
Checking for lirc ... no
Checking for lircc ... no
Checking for color console output ... no
Checking for DVD support (libdvdnav) ... no
Creating config.mak
Creating config.h

Config files successfully generated by ./configure --enable-gui --enable-largefiles --language=zh_CN,en --enable-menu --enable-alsa !

Install prefix: /usr/local
Data directory: /usr/local/share/mplayer
Config direct.: /usr/local/etc/mplayer

Byte order: little-endian
Optimizing for: native

Languages:
Messages/GUI: zh_CN
Manual pages: en en

Enabled optional drivers:
Input: ftp pvr tv-teletext tv-v4l2 tv-v4l tv libdvdcss(internal) dvdread(internal) vcd dvb network
Codecs: libavcodec qtx real xanim win32 faad2 libmpeg2 liba52 mp3lib tremor(internal)
Audio output: alsa oss v4l2 mpegpes(dvb)
Video output: v4l2 pnm png mpegpes(dvb) fbdev xvidix cvidix xv x11 xover md5sum tga
Audio filters:
Disabled optional drivers:
Input: dvdnav vstream radio live555 nemesi cddb cdda smb
Codecs: x264 xvid libdv libamr_wb libamr_nb faac musepack libdca libtheora speex toolame twolame libmad liblzo gif
Audio output: sun openal jack polyp esd arts ivtv dxr2 nas sdl
Video output: ivtv dxr3 dxr2 sdl vesa gif89a jpeg zr zr2 svga caca aa ggi xmga mga winvidix opengl 3dfx dga xvmc dfbmga directfb bl xvr100 tdfx_vid s3fb tdfxfb
Audio filters: ladspa

'config.h' and 'config.mak' contain your configuration options.
Note: If you alter theses files (for instance CFLAGS) MPlayer may no longer
compile *** DO NOT REPORT BUGS if you tweak these files ***

'make' will now compile MPlayer and 'make install' will install it.
Note: On non-Linux systems you might need to use 'gmake' instead of 'make'.

Please check mtrr settings at /proc/mtrr (see DOCS/HTML/zh_CN/video.html#mtrr)

Check configure.log if you wonder why an autodetection failed (make sure
development headers/packages are installed).

NOTE: The --enable-* parameters unconditionally force options on, completely
skipping autodetection. This behavior is unlike what you may be used to from
autoconf-based configure scripts that can decide to override you. This greater
level of control comes at a price. You may have to provide the correct compiler
and linker flags yourself.
If you used one of these options (except --enable-gui and similar ones that
turn on internal features) and experience a compilation or linking failure,
make sure you have passed the necessary compiler/linker flags to configure.

If you suspect a bug, please read DOCS/HTML/zh_CN/bugreports.html.

然后就是编译了

wp@wp-laptop:~/public/MPlayer-1.0rc2$ make
./version.sh `cc -dumpversion`
cc -I./libavcodec -I./libavformat -Wdisabled-optimization -Wno-pointer-sign -Wdeclaration-after-statement -I. -I. -I./libavutil -Wall -Wno-switch -Wpointer-arith -Wredundant-decls -O4 -march=native -mtune=native -pipe -ffast-math -fomit-frame-pointer -D_REENTRANT -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE -DHAVE_CONFIG_H -I/usr/include/freetype2 -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12 -c -o mplayer.o mplayer.c
In file included from mplayer.c:793:
cfg-mplayer.h:64: warning: redundant redeclaration of 'enqueue'
mplayer.c:230: warning: previous definition of 'enqueue' was here
mplayer.c: In function 'parse_cfgfiles':
mplayer.c:815: warning: ignoring return value of 'write', declared with attribute warn_unused_result
mplayer.c: In function 'main':
mplayer.c:2503: warning: format not a string literal and no format arguments
mplayer.c:2664: warning: passing argument 2 of 'guiGetEvent' from incompatible pointer type
mplayer.c:3061: warning: ignoring return value of 'fwrite', declared with attribute warn_unused_result
mplayer.c:3062: warning: ignoring return value of 'fwrite', declared with attribute warn_unused_result
cc -I./libavcodec -I./libavformat -Wdisabled-optimization -Wno-pointer-sign -Wdeclaration-after-statement -I. -I. -I./libavutil -Wall -Wno-switch -Wpointer-arith -Wredundant-decls -O4 -march=native -mtune=native -pipe -ffast-math -fomit-frame-pointer -D_REENTRANT -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE -DHAVE_CONFIG_H -I/usr/include/freetype2 -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12 -c -o vobsub.o vobsub.c
make -C libvo libvo.a
make[1]: Entering directory `/home/wp/public/MPlayer-1.0rc2/libvo'
make[1]: `libvo.a' is up to date.
make[1]: Leaving directory `/home/wp/public/MPlayer-1.0rc2/libvo'
make -C libao2
make[1]: Entering directory `/home/wp/public/MPlayer-1.0rc2/libao2'
make[1]: Nothing to be done for `libs'.
make[1]: Leaving directory `/home/wp/public/MPlayer-1.0rc2/libao2'
make -C input
make[1]: Entering directory `/home/wp/public/MPlayer-1.0rc2/input'
make[1]: Nothing to be done for `libs'.
make[1]: Leaving directory `/home/wp/public/MPlayer-1.0rc2/input'
make -C vidix
make[1]: Entering directory `/home/wp/public/MPlayer-1.0rc2/vidix'
make[1]: Nothing to be done for `libs'.
make[1]: Leaving directory `/home/wp/public/MPlayer-1.0rc2/vidix'
make -C gui
make[1]: Entering directory `/home/wp/public/MPlayer-1.0rc2/gui'
make[1]: Nothing to be done for `libs'.
make[1]: Leaving directory `/home/wp/public/MPlayer-1.0rc2/gui'
make -C libmenu
make[1]: Entering directory `/home/wp/public/MPlayer-1.0rc2/libmenu'
make[1]: Nothing to be done for `libs'.
make[1]: Leaving directory `/home/wp/public/MPlayer-1.0rc2/libmenu'
make -C libmpcodecs
make[1]: Entering directory `/home/wp/public/MPlayer-1.0rc2/libmpcodecs'
make[1]: Nothing to be done for `libs'.
make[1]: Leaving directory `/home/wp/public/MPlayer-1.0rc2/libmpcodecs'
make -C libaf
make[1]: Entering directory `/home/wp/public/MPlayer-1.0rc2/libaf'
make[1]: Nothing to be done for `libs'.
make[1]: Leaving directory `/home/wp/public/MPlayer-1.0rc2/libaf'
make -C libmpdemux libmpdemux.a
make[1]: Entering directory `/home/wp/public/MPlayer-1.0rc2/libmpdemux'
make[1]: `libmpdemux.a' is up to date.
make[1]: Leaving directory `/home/wp/public/MPlayer-1.0rc2/libmpdemux'
make -C stream
make[1]: Entering directory `/home/wp/public/MPlayer-1.0rc2/stream'
make[1]: Nothing to be done for `libs'.
make[1]: Leaving directory `/home/wp/public/MPlayer-1.0rc2/stream'
make -C libswscale
make[1]: Entering directory `/home/wp/public/MPlayer-1.0rc2/libswscale'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/wp/public/MPlayer-1.0rc2/libswscale'
make -C libvo libosd.a
make[1]: Entering directory `/home/wp/public/MPlayer-1.0rc2/libvo'
make[1]: `libosd.a' is up to date.
make[1]: Leaving directory `/home/wp/public/MPlayer-1.0rc2/libvo'
make -C libavformat
make[1]: Entering directory `/home/wp/public/MPlayer-1.0rc2/libavformat'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/wp/public/MPlayer-1.0rc2/libavformat'
make -C libavcodec
make[1]: Entering directory `/home/wp/public/MPlayer-1.0rc2/libavcodec'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/wp/public/MPlayer-1.0rc2/libavcodec'
make -C libavutil
make[1]: Entering directory `/home/wp/public/MPlayer-1.0rc2/libavutil'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/wp/public/MPlayer-1.0rc2/libavutil'
make -C loader
make[1]: Entering directory `/home/wp/public/MPlayer-1.0rc2/loader'
make[1]: Nothing to be done for `libs'.
make[1]: Leaving directory `/home/wp/public/MPlayer-1.0rc2/loader'
make -C mp3lib
make[1]: Entering directory `/home/wp/public/MPlayer-1.0rc2/mp3lib'
make[1]: Nothing to be done for `libs'.
make[1]: Leaving directory `/home/wp/public/MPlayer-1.0rc2/mp3lib'
make -C liba52
make[1]: Entering directory `/home/wp/public/MPlayer-1.0rc2/liba52'
make[1]: Nothing to be done for `libs'.
make[1]: Leaving directory `/home/wp/public/MPlayer-1.0rc2/liba52'
make -C libmpeg2
make[1]: Entering directory `/home/wp/public/MPlayer-1.0rc2/libmpeg2'
make[1]: Nothing to be done for `libs'.
make[1]: Leaving directory `/home/wp/public/MPlayer-1.0rc2/libmpeg2'
make -C libfaad2
make[1]: Entering directory `/home/wp/public/MPlayer-1.0rc2/libfaad2'
make[1]: Nothing to be done for `libs'.
make[1]: Leaving directory `/home/wp/public/MPlayer-1.0rc2/libfaad2'
make -C dvdread
make[1]: Entering directory `/home/wp/public/MPlayer-1.0rc2/dvdread'
make[1]: Nothing to be done for `libs'.
make[1]: Leaving directory `/home/wp/public/MPlayer-1.0rc2/dvdread'
make -C libdvdcss
make[1]: Entering directory `/home/wp/public/MPlayer-1.0rc2/libdvdcss'
make[1]: Nothing to be done for `libs'.
make[1]: Leaving directory `/home/wp/public/MPlayer-1.0rc2/libdvdcss'
make -C libass
make[1]: Entering directory `/home/wp/public/MPlayer-1.0rc2/libass'
make[1]: Nothing to be done for `libs'.
make[1]: Leaving directory `/home/wp/public/MPlayer-1.0rc2/libass'
make -C osdep
make[1]: Entering directory `/home/wp/public/MPlayer-1.0rc2/osdep'
make[1]: Nothing to be done for `libs'.
make[1]: Leaving directory `/home/wp/public/MPlayer-1.0rc2/osdep'
cc -o mplayer mplayer.o m_property.o mp_fifo.o mp_msg.o mixer.o parser-mpcmd.o subopt-helper.o command.o asxparser.o codec-cfg.o cpudetect.o edl.o find_sub.o get_path.o m_config.o m_option.o m_struct.o mpcommon.o parser-cfg.o playtree.o playtreeparser.o spudec.o sub_cc.o subreader.o vobsub.o unrarlib.o libvo/libvo.a libao2/libao2.a input/libinput.a vidix/libvidix.a gui/libgui.a libmenu/libmenu.a libmpcodecs/libmpcodecs.a libaf/libaf.a libmpdemux/libmpdemux.a stream/stream.a libswscale/libswscale.a libvo/libosd.a libavformat/libavformat.a libavcodec/libavcodec.a libavutil/libavutil.a libpostproc/libpostproc.a loader/libloader.a mp3lib/libmp3.a liba52/liba52.a libmpeg2/libmpeg2.a libfaad2/libfaad2.a tremor/libvorbisidec.a dvdread/libdvdread.a libdvdcss/libdvdcss.a libass/libass.a osdep/libosdep.a -lXext -lX11 -lpthread -lXv -lXinerama -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lpangoft2-1.0 -lgdk_pixbuf-2.0 -lm -lpangocairo-1.0 -lgio-2.0 -lcairo -lpango-1.0 -lfreetype -lz -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lglib-2.0 -lglib-2.0 -Wl,-z,noexecstack -lpng -lz -lasound -ldl -lpthread -lfreetype -lz -lfontconfig -lz -lpthread -ldl -rdynamic -lm
gui/libgui.a(interface.o): In function `guiInit':
interface.c:(.text+0x955): undefined reference to `vo_setwindow'
collect2: ld returned 1 exit status
make: *** [mplayer] 错误 1

wp@wp-laptop:~/public/MPlayer-1.0rc2$

问题就在这里,编译不成功,更谈不上后面的sudo make install了,希望指点下,万分感谢了!


页首
 用户资料  
 
2 楼 
 文章标题 : Re: 跪求编译mplayer时的报错问题解决
帖子发表于 : 2008-11-09 18:38 
头像

注册: 2005-12-28 1:16
帖子: 3916
地址: 火星
系统: Ubuntu 12.10 X64
送出感谢: 1
接收感谢: 0 次
http://www.google.com/search?hl=en&q=+u ... h&aq=f&oq=


_________________
目前负债150多万


页首
 用户资料  
 
3 楼 
 文章标题 : Re: 跪求编译mplayer时的报错问题解决
帖子发表于 : 2008-11-09 18:44 
头像

注册: 2005-10-25 13:54
帖子: 272
送出感谢: 0 次
接收感谢: 0 次
应该是源代码有问题,我发现这个问题已在bug列表中有


_________________
Full Circle中文杂志 | Ubuntu社区独立发行的电子月刊
http://www.freeearth.org.cn


页首
 用户资料  
 
4 楼 
 文章标题 : Re: 跪求编译mplayer时的报错问题解决
帖子发表于 : 2008-11-09 19:06 

注册: 2008-01-01 15:37
帖子: 15
送出感谢: 0 次
接收感谢: 0 次
继续等待高手,马上要看WCG决赛了


页首
 用户资料  
 
5 楼 
 文章标题 : Re: 跪求编译mplayer时的报错问题解决
帖子发表于 : 2008-11-09 21:57 

注册: 2008-01-01 15:37
帖子: 15
送出感谢: 0 次
接收感谢: 0 次
自己把帖顶起来


页首
 用户资料  
 
6 楼 
 文章标题 : Re: 跪求编译mplayer时的报错问题解决
帖子发表于 : 2008-11-09 22:09 
头像

注册: 2005-08-18 18:43
帖子: 3277
送出感谢: 0 次
接收感谢: 3
Development Files for Gutsy Gibbon

Do not be alarmed if the repository suggests other files as well, or informs you that you already have some of this impressive list. And certainly feel free to add your own!

Code:

代码:
$ sudo apt-get install avifile-divx-plugin avifile-xvid-plugin gawk \
libxcursor-dev ladspa-sdk liba52-0.7.4 liba52-0.7.4-dev libaa1-dev libartsc0 \
libartsc0-dev libasound2-dev libatk1.0-dev libaudiofile-dev libavcodec1d libavcodec-dev \
libavformat1d libavformat-dev libavifile-0.7c2 libavifile-0.7-dev libavutil1d \
libavutil-dev libcaca-dev libcairo2-dev libcdparanoia0-dev libcucul-dev libdv4-dev \
libdirectfb-dev libdirectfb-extra libdbus-1-dev libdbus-glib-1-dev libdc1394-13 \
libdc1394-13-dev libdfb++-0.9-25 libdfb++-dev libdts-dev libdvdnav4 libdvdnav-dev \
libdvdread3 libdvdread-dev libebml0 libebml-dev libenca0 libenca-dev libesd0-dev \
libexpat1-dev libfaac0 libfaac-dev libfaad2-0 libfaad2-dev libfame-0.9 libfame-dev \
libflac++6 libflac-dev libflac++-dev libfontconfig1-dev libfontenc-dev libfreetype6-dev \
libfribidi-dev libgdk-pixbuf2 libgdk-pixbuf-dev libgii1 libgii1-dev libgii1-target-x \
libgl1-mesa-dev libglib1.2 libglib1.2-dev libglib2.0-dev libglu1-mesa-dev \
libglu1-xorg-dev libgsm1 libgsm1-dev libgtk1.2 libgtk1.2-common libgtk1.2-dev \
libgtk2.0-dev libice-dev libggi2 libggi2-dev libggimisc2 libggimisc2-dev libggiwmh0 \
libggiwmh0-dev libjpeg62-dev liblame0 liblame-dev liblivemedia-dev liblzo1 liblzo-dev \
liblzo2-2 liblzo2-dev libmad0 libmad0-dev libmatroska0 libmatroska-dev libmikmod2 \
libmikmod2-dev libmp4v2-0 libmp4v2-dev libmpcdec3 libmpcdec-dev libncurses5-dev \
libogg-dev libpango1.0-dev libpng12-dev libpopt-dev libpostproc1d libpostproc-dev \
libraw1394-dev libsdl1.2-dev libslang2-dev libsmbclient-dev libsm-dev libspeex-dev \
libsvga1 libsvga1-dev libsysfs-dev libtheora-dev libungif4-dev libungif4g \
libvorbis-dev libx11-dev  libxau-dev libxcomposite-dev \
libxdamage-dev libxdmcp-dev libxext-dev libxfixes-dev libxfont-dev libxft-dev \
libxi-dev libxinerama-dev libxrandr-dev libxrender-dev libxsharp-dev libxv-dev \
libxvidcore4 libxvidcore4-dev libxvmc1 libxvmc-dev libxxf86dga-dev libxxf86vm-dev \
mesa-common-dev pnet-interpreter sharutils toolame ttf-bitstream-vera \
x11proto-composite-dev x11proto-core-dev x11proto-damage-dev \
x11proto-fixes-dev x11proto-fonts-dev x11proto-input-dev x11proto-kb-dev \
x11proto-randr-dev x11proto-render-dev x11proto-video-dev x11proto-xext-dev \
x11proto-xf86dga-dev x11proto-xf86vidmode-dev x11proto-xinerama-dev \
xlibs-static-dev xtrans-dev zlib1g-dev

Development Files for Hardy Heron

Do not be alarmed if the repository suggests other files as well, or informs you that you already have some of this impressive list. And certainly feel free to add your own!

Code:

代码:
$ sudo apt-get install comerr-dev ladspa-sdk libaa1-dev libarts1c2a libarts1-dev \
libartsc0 libartsc0-dev libasound2-dev libaudio2 libaudio-dev libaudiofile-dev \
libavahi-client-dev libavahi-common-dev libcaca-dev libcairo-directfb2 \
libcairo-directfb2-dev libcdio-dev libcdparanoia0-dev libcucul-dev libcupsys2-dev \
libdbus-1-dev libdirectfb-dev libdirectfb-extra libdts-dev libdv4-dev libenca0 \
libenca-dev libesd0-dev libfaac0 libfaac-dev libfreebob0 libfribidi-dev \
libgcrypt11-dev libggi2 libggi2-dev libggiwmh0 libggiwmh0-dev libgii1 libgii1-dev \
libgii1-target-x libgl1-mesa-dev libglu1-mesa-dev libgnutls-dev libgnutlsxx13 \
libgpg-error-dev libgtk2.0-dev libgtk-directfb-2.0-0 libgtk-directfb-2.0-dev \
libjack0 libjack-dev libjpeg62-dev libkadm55 libkrb5-dev libladspa-ocaml \
libladspa-ocaml-dev liblame0 liblame-dev liblcms1-dev  \
liblivemedia-dev liblzo2-dev libmad0 libmad0-dev libmng-dev libmpcdec3 \
libmpcdec-dev libncurses5-dev libogg-dev libopenal-dev libopencdk10-dev \
libpng12-dev libpopt-dev libpulse-browse0 libpulse-dev libpulse-mainloop-glib0 \
libqt3-headers libqt3-mt libqt3-mt-dev libsdl1.2-dev libslang2-dev libsmbclient-dev \
libsmpeg0 libsmpeg-dev libspeex-dev libsvga1 libsvga1-dev libsysfs-dev libtasn1-3-dev \
libtheora-dev libtwolame0 libtwolame-dev libungif4-dev libungif4g libvorbis-dev \
libx11-dev libxcb-shm0 libxcb-shm0-dev libxcb-xv0 \
libxcb-xv0-dev libxcb-xvmc0 libxcb-xvmc0-dev libxext-dev libxi-dev libxinerama-dev \
libxmu-dev libxmu-headers libxss-dev libxt-dev libxv-dev libxvidcore4 libxvidcore4-dev \
libxvmc1 libxvmc-dev libxxf86dga-dev libxxf86vm-dev mesa-common-dev ocaml-base-nox \
ocaml-findlib ocaml-interp ocaml-nox qt3-dev-tools x11proto-core-dev \
x11proto-scrnsaver-dev x11proto-video-dev x11proto-xf86dga-dev \
x11proto-xf86vidmode-dev zlib1g-dev zlib1g-dev


Development Files for Intrepid Ibex

Do not be alarmed if the repository suggests other files as well, or informs you that you already have some of this impressive list. And certainly feel free to add your own!

Code:

代码:
$ sudo apt-get install libx11-dev gnome-control-center gnome-settings-daemon \
libgnome-window-settings1 libpthread-stubs0 libpthread-stubs0-dev libx11-6 \
libxau-dev libxcb-xlib0-dev libxcb1-dev libxdmcp-dev libxext-dev libxi-dev \
libxi6 x11proto-core-dev x11proto-input-dev x11proto-kb-dev x11proto-xext-dev \
xinput xtrans-dev  libpthread-stubs0 libpthread-stubs0-dev libx11-dev libxau-dev \
libxcb-xlib0-dev libxcb1-dev libxdmcp-dev libxext-dev libxi-dev x11proto-core-dev \
x11proto-input-dev x11proto-kb-dev x11proto-xext-dev xtrans-dev zlib1g-dev \
libgtk2.0-dev liboil0.3-dev libschroedinger-1.0-0 libschroedinger-dev libfaac-dev \
libfaac0  libmp3lame-dev libmp3lame0 libxvidcore4-dev liblivemedia-dev camlp4 \
ladspa-sdk ledit libladspa-ocaml libladspa-ocaml-dev libncurses5-dev ocaml-base-nox \
ocaml-findlib ocaml-interp ocaml-nox libspeex-dev libspeexdsp-dev libogg-dev \
libtheora-dev libmpcdec-dev libmpcdec3 libcdparanoia0-dev libgif-dev \
libjpeg62-dev libfribidi-dev libmad0-dev libavahi-client-dev libavahi-common-dev \
libdbus-1-dev libpulse-dev libpulse-mainloop-glib0 libxt-dev libxv-dev \
x11proto-video-dev liblzo2-dev libopenal-dev libopenal1 libopenal-dev libasound2-dev \
libdv4-dev libpopt-dev libaudiofile-dev libesd0-dev libdca-dev libdca0 libxvmc-dev \
libxvmc1 libggi-target-x libggi2 libggi2-dev libggimisc2 libggimisc2-dev libggiwmh0 \
libggiwmh0-dev libggiwmh0-target-x libgii1 libgii1-dev libgii1-target-x libglide2 \
libsvga1 libenca-dev libenca0 libcaca-dev libcucul-dev libslang2-dev libartsc0 \
libartsc0-dev libsvga1-dev libxss-dev x11proto-scrnsaver-dev libaa1-dev libfreebob0 \
libjack-dev libjack0 libaudio-dev libaudio2 libdirectfb-dev libdirectfb-extra \
libgl1-mesa-dev libglu1-mesa-dev libglu1-xorg-dev libsdl1.2-dev libsysfs-dev \
mesa-common-dev libsmbclient-dev libvorbis-dev libxxf86dga-dev x11proto-xf86dga-dev \
libxxf86vm-dev x11proto-xf86vidmode-dev


_________________
໌→ iCookie Gtk Theme
໌→DropPlusBluetheme
กรัก กรัก`菠萝


页首
 用户资料  
 
7 楼 
 文章标题 : Re: 跪求编译mplayer时的报错问题解决
帖子发表于 : 2008-11-09 22:50 

注册: 2008-01-01 15:37
帖子: 15
送出感谢: 0 次
接收感谢: 0 次
感谢楼上的,受教了


页首
 用户资料  
 
8 楼 
 文章标题 : Re: 跪求编译mplayer时的报错问题解决
帖子发表于 : 2008-11-10 8:26 

注册: 2008-01-01 15:37
帖子: 15
送出感谢: 0 次
接收感谢: 0 次
问题还没有解决呢,在线等待高手的详细指导啊


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 8 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:没有注册用户 和 3 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译