本来mplayer与totem放那些文件都是正常的,今天想搞定一下totem放一些rmvb不出声的问题时,照论坛上的方法把.xine/catalog.cache下的内容改动后,发现totem与mplayer不能放那些文件了.而Kaffeine放这些文件时,只有声音没有图像.
下面是最奇怪的:
当我用kaffeine放这些只有声音没有图像的文件时,同时再开mplayer来放的话,就mplayer就正常了........但totem还是会自动退出. 这是为什么呢?
========(下面是我重启后加的)=======
真是没天理,为什么重启一下就OK了呢?
为什么我的mplayer与totem放一些文件时会自动退出呢?(变态啊,重启一下就OK了)
-
horsefaced
- 帖子： 43
- 注册时间： 2007-04-21 9:36
为什么我的mplayer与totem放一些文件时会自动退出呢?(变态啊,重启一下就OK了)
- 附件
-
- xine配置文件.tar.gz
- 这是我现在用的配置文件,高手给看看吧
- (6.59 KiB) 已下载 43 次
上次由 horsefaced 在 2007-08-19 12:29，总共编辑 1 次。
-
horsefaced
- 帖子： 43
- 注册时间： 2007-04-21 9:36
这个是错误时显示的
MPlayer 2:1.0~rc1-0ubuntu9.1 (C) 2000-2006 MPlayer Team
CPU: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz (Family: 6, Model: 15, Stepping: 2)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
Can't open joystick device /dev/input/js0: No such file or directory
Can't init input joystick
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing doraemon2006.avi.
AVI file format detected.
AVI: ODML: Building ODML index (2 superindexchunks).
VIDEO: [XVID] 864x480 16bpp 23.976 fps 1946.6 kbps (237.6 kbyte/s)
Clip info:
Software: AVI-Mux GUI 1.17.6, May 28 2006 15:53:35
open: No such file or directory
[MGA] Couldn't open: /dev/mga_vid
open: No such file or directory
[MGA] Couldn't open: /dev/mga_vid
[VO_TDFXFB] Can't open /dev/fb0: No such file or directory.
[VO_3DFX] Unable to open /dev/3dfx.
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)
==========================================================================
==========================================================================
Forced audio codec: mad
Opening audio decoder: [liba52] AC3 decoding with liba52
Using SSE optimized IMDCT transform
Using MMX optimized resampler
AUDIO: 48000 Hz, 2 ch, s16le, 448.0 kbit/29.17% (ratio: 56000->192000)
Selected audio codec: [a52] afm: liba52 (AC3-liba52)
==========================================================================
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
VDec: vo config request - 864 x 480 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.80:1 - prescaling to correct movie aspect.
VO: [xv] 864x480 => 864x480 Planar YV12
X11 error: BadAlloc (insufficient resources for operation)?,?% 0 0
MPlayer interrupted by signal 6 in module: vo_check_events
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
gcc version. If you think it's MPlayer's fault, please read
DOCS/HTML/en/bugreports.html and follow the instructions there. We can't and
won't help unless you provide this information when reporting a possible bug.
CPU: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz (Family: 6, Model: 15, Stepping: 2)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
Can't open joystick device /dev/input/js0: No such file or directory
Can't init input joystick
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing doraemon2006.avi.
AVI file format detected.
AVI: ODML: Building ODML index (2 superindexchunks).
VIDEO: [XVID] 864x480 16bpp 23.976 fps 1946.6 kbps (237.6 kbyte/s)
Clip info:
Software: AVI-Mux GUI 1.17.6, May 28 2006 15:53:35
open: No such file or directory
[MGA] Couldn't open: /dev/mga_vid
open: No such file or directory
[MGA] Couldn't open: /dev/mga_vid
[VO_TDFXFB] Can't open /dev/fb0: No such file or directory.
[VO_3DFX] Unable to open /dev/3dfx.
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)
==========================================================================
==========================================================================
Forced audio codec: mad
Opening audio decoder: [liba52] AC3 decoding with liba52
Using SSE optimized IMDCT transform
Using MMX optimized resampler
AUDIO: 48000 Hz, 2 ch, s16le, 448.0 kbit/29.17% (ratio: 56000->192000)
Selected audio codec: [a52] afm: liba52 (AC3-liba52)
==========================================================================
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
VDec: vo config request - 864 x 480 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.80:1 - prescaling to correct movie aspect.
VO: [xv] 864x480 => 864x480 Planar YV12
X11 error: BadAlloc (insufficient resources for operation)?,?% 0 0
MPlayer interrupted by signal 6 in module: vo_check_events
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
gcc version. If you think it's MPlayer's fault, please read
DOCS/HTML/en/bugreports.html and follow the instructions there. We can't and
won't help unless you provide this information when reporting a possible bug.
-
horsefaced
- 帖子： 43
- 注册时间： 2007-04-21 9:36
这个是开了kaffeine后的显示
MPlayer 2:1.0~rc1-0ubuntu9.1 (C) 2000-2006 MPlayer Team
CPU: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz (Family: 6, Model: 15, Stepping: 2)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
Can't open joystick device /dev/input/js0: No such file or directory
Can't init input joystick
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing doraemon2006.avi.
AVI file format detected.
AVI: ODML: Building ODML index (2 superindexchunks).
VIDEO: [XVID] 864x480 16bpp 23.976 fps 1946.6 kbps (237.6 kbyte/s)
Clip info:
Software: AVI-Mux GUI 1.17.6, May 28 2006 15:53:35
open: No such file or directory
[MGA] Couldn't open: /dev/mga_vid
open: No such file or directory
[MGA] Couldn't open: /dev/mga_vid
[VO_TDFXFB] Can't open /dev/fb0: No such file or directory.
[VO_3DFX] Unable to open /dev/3dfx.
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)
==========================================================================
==========================================================================
Forced audio codec: mad
Opening audio decoder: [liba52] AC3 decoding with liba52
Using SSE optimized IMDCT transform
Using MMX optimized resampler
AUDIO: 48000 Hz, 2 ch, s16le, 448.0 kbit/29.17% (ratio: 56000->192000)
Selected audio codec: [a52] afm: liba52 (AC3-liba52)
==========================================================================
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
VDec: vo config request - 864 x 480 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.80:1 - prescaling to correct movie aspect.
VO: [xv] 864x480 => 864x480 Planar YV12
X11 error: BadAlloc (insufficient resources for operation)?,?% 0 0
MPlayer interrupted by signal 6 in module: vo_check_events
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
gcc version. If you think it's MPlayer's fault, please read
DOCS/HTML/en/bugreports.html and follow the instructions there. We can't and
won't help unless you provide this information when reporting a possible bug.
chenshi@chenshi-laptop:~/movies$ mplayer doraemon2006.avi
MPlayer 2:1.0~rc1-0ubuntu9.1 (C) 2000-2006 MPlayer Team
CPU: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz (Family: 6, Model: 15, Stepping: 2)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
Can't open joystick device /dev/input/js0: No such file or directory
Can't init input joystick
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing doraemon2006.avi.
AVI file format detected.
AVI: ODML: Building ODML index (2 superindexchunks).
VIDEO: [XVID] 864x480 16bpp 23.976 fps 1946.6 kbps (237.6 kbyte/s)
Clip info:
Software: AVI-Mux GUI 1.17.6, May 28 2006 15:53:35
open: No such file or directory
[MGA] Couldn't open: /dev/mga_vid
open: No such file or directory
[MGA] Couldn't open: /dev/mga_vid
[VO_TDFXFB] Can't open /dev/fb0: No such file or directory.
[VO_3DFX] Unable to open /dev/3dfx.
Xv: could not grab port 73
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)
==========================================================================
==========================================================================
Forced audio codec: mad
Opening audio decoder: [liba52] AC3 decoding with liba52
Using SSE optimized IMDCT transform
Using MMX optimized resampler
AUDIO: 48000 Hz, 2 ch, s16le, 448.0 kbit/29.17% (ratio: 56000->192000)
Selected audio codec: [a52] afm: liba52 (AC3-liba52)
==========================================================================
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
VDec: vo config request - 864 x 480 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.80:1 - prescaling to correct movie aspect.
VO: [xv] 864x480 => 864x480 Planar YV12
CPU: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz (Family: 6, Model: 15, Stepping: 2)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
Can't open joystick device /dev/input/js0: No such file or directory
Can't init input joystick
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing doraemon2006.avi.
AVI file format detected.
AVI: ODML: Building ODML index (2 superindexchunks).
VIDEO: [XVID] 864x480 16bpp 23.976 fps 1946.6 kbps (237.6 kbyte/s)
Clip info:
Software: AVI-Mux GUI 1.17.6, May 28 2006 15:53:35
open: No such file or directory
[MGA] Couldn't open: /dev/mga_vid
open: No such file or directory
[MGA] Couldn't open: /dev/mga_vid
[VO_TDFXFB] Can't open /dev/fb0: No such file or directory.
[VO_3DFX] Unable to open /dev/3dfx.
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)
==========================================================================
==========================================================================
Forced audio codec: mad
Opening audio decoder: [liba52] AC3 decoding with liba52
Using SSE optimized IMDCT transform
Using MMX optimized resampler
AUDIO: 48000 Hz, 2 ch, s16le, 448.0 kbit/29.17% (ratio: 56000->192000)
Selected audio codec: [a52] afm: liba52 (AC3-liba52)
==========================================================================
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
VDec: vo config request - 864 x 480 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.80:1 - prescaling to correct movie aspect.
VO: [xv] 864x480 => 864x480 Planar YV12
X11 error: BadAlloc (insufficient resources for operation)?,?% 0 0
MPlayer interrupted by signal 6 in module: vo_check_events
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
gcc version. If you think it's MPlayer's fault, please read
DOCS/HTML/en/bugreports.html and follow the instructions there. We can't and
won't help unless you provide this information when reporting a possible bug.
chenshi@chenshi-laptop:~/movies$ mplayer doraemon2006.avi
MPlayer 2:1.0~rc1-0ubuntu9.1 (C) 2000-2006 MPlayer Team
CPU: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz (Family: 6, Model: 15, Stepping: 2)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
Can't open joystick device /dev/input/js0: No such file or directory
Can't init input joystick
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing doraemon2006.avi.
AVI file format detected.
AVI: ODML: Building ODML index (2 superindexchunks).
VIDEO: [XVID] 864x480 16bpp 23.976 fps 1946.6 kbps (237.6 kbyte/s)
Clip info:
Software: AVI-Mux GUI 1.17.6, May 28 2006 15:53:35
open: No such file or directory
[MGA] Couldn't open: /dev/mga_vid
open: No such file or directory
[MGA] Couldn't open: /dev/mga_vid
[VO_TDFXFB] Can't open /dev/fb0: No such file or directory.
[VO_3DFX] Unable to open /dev/3dfx.
Xv: could not grab port 73
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)
==========================================================================
==========================================================================
Forced audio codec: mad
Opening audio decoder: [liba52] AC3 decoding with liba52
Using SSE optimized IMDCT transform
Using MMX optimized resampler
AUDIO: 48000 Hz, 2 ch, s16le, 448.0 kbit/29.17% (ratio: 56000->192000)
Selected audio codec: [a52] afm: liba52 (AC3-liba52)
==========================================================================
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
VDec: vo config request - 864 x 480 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.80:1 - prescaling to correct movie aspect.
VO: [xv] 864x480 => 864x480 Planar YV12
-
horsefaced
- 帖子： 43
- 注册时间： 2007-04-21 9:36
这个是totem的显示
(totem:12337): Gtk-WARNING **: Invalid input string
(totem:12337): Gtk-WARNING **: Invalid input string
The program 'totem' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadAlloc (insufficient resources for operation)'.
(Details: serial 97 error_code 11 request_code 141 minor_code 19)
(Note to programmers: normally, X errors are reported asynchronously;
that is, you will receive the error a while after causing it.
To debug your program, run it with the --sync command line
option to change this behavior. You can then get a meaningful
backtrace from your debugger if you break on the gdk_x_error() function.)
(totem:12337): Gtk-WARNING **: Invalid input string
The program 'totem' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadAlloc (insufficient resources for operation)'.
(Details: serial 97 error_code 11 request_code 141 minor_code 19)
(Note to programmers: normally, X errors are reported asynchronously;
that is, you will receive the error a while after causing it.
To debug your program, run it with the --sync command line
option to change this behavior. You can then get a meaningful
backtrace from your debugger if you break on the gdk_x_error() function.)