当前时区为 UTC + 8 小时



发表新帖 回复这个主题  [ 8 篇帖子 ] 
作者 内容
1 楼 
 文章标题 : [问题]哪位把你安装时生成的menu.lst共享一下
帖子发表于 : 2008-08-14 7:47 

注册: 2005-10-26 15:43
帖子: 50
送出感谢: 0 次
接收感谢: 0 次
rt,谢谢!


页首
 用户资料  
 
2 楼 
 文章标题 :
帖子发表于 : 2008-08-14 8:55 
头像

注册: 2007-06-09 9:19
帖子: 953
地址: 上海
送出感谢: 1
接收感谢: 0 次
代码:
# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default      0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout      10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title      Windows 95/98/NT/2000
# root      (hd0,0)
# makeactive
# chainloader   +1
#
# title      Linux
# root      (hd0,1)
# kernel   /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=b1bdd4ae-4199-4093-8654-01afc7cf5458 ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,2)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash locale=zh_CN

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title      Ubuntu 8.04.1, kernel 2.6.24-20-generic
root      (hd0,2)
kernel      /boot/vmlinuz-2.6.24-20-generic root=UUID=b1bdd4ae-4199-4093-8654-01afc7cf5458 ro quiet splash locale=zh_CN
initrd      /boot/initrd.img-2.6.24-20-generic
quiet

title      Ubuntu 8.04.1, kernel 2.6.24-20-generic (recovery mode)
root      (hd0,2)
kernel      /boot/vmlinuz-2.6.24-20-generic root=UUID=b1bdd4ae-4199-4093-8654-01afc7cf5458 ro single
initrd      /boot/initrd.img-2.6.24-20-generic

title      Ubuntu 8.04.1, kernel 2.6.24-19-generic
root      (hd0,2)
kernel      /boot/vmlinuz-2.6.24-19-generic root=UUID=b1bdd4ae-4199-4093-8654-01afc7cf5458 ro quiet splash locale=zh_CN
initrd      /boot/initrd.img-2.6.24-19-generic
quiet

title      Ubuntu 8.04.1, kernel 2.6.24-19-generic (recovery mode)
root      (hd0,2)
kernel      /boot/vmlinuz-2.6.24-19-generic root=UUID=b1bdd4ae-4199-4093-8654-01afc7cf5458 ro single
initrd      /boot/initrd.img-2.6.24-19-generic

title      Ubuntu 8.04.1, kernel 2.6.24-16-generic
root      (hd0,2)
kernel      /boot/vmlinuz-2.6.24-16-generic root=UUID=b1bdd4ae-4199-4093-8654-01afc7cf5458 ro quiet splash locale=zh_CN
initrd      /boot/initrd.img-2.6.24-16-generic
quiet

title      Ubuntu 8.04.1, kernel 2.6.24-16-generic (recovery mode)
root      (hd0,2)
kernel      /boot/vmlinuz-2.6.24-16-generic root=UUID=b1bdd4ae-4199-4093-8654-01afc7cf5458 ro single
initrd      /boot/initrd.img-2.6.24-16-generic

title      Ubuntu 8.04.1, memtest86+
root      (hd0,2)
kernel      /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title      Other operating systems:
root

# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title      Microsoft Windows XP Professional
root      (hd0,0)
savedefault
makeactive
chainloader   +1


_________________
太阳好毒…….


页首
 用户资料  
 
3 楼 
 文章标题 :
帖子发表于 : 2008-08-14 9:00 

注册: 2005-10-26 15:43
帖子: 50
送出感谢: 0 次
接收感谢: 0 次
谢谢楼上,对我很有帮助~


页首
 用户资料  
 
4 楼 
 文章标题 :
帖子发表于 : 2008-08-14 9:29 
头像

注册: 2007-11-10 1:09
帖子: 133
地址: 上海
送出感谢: 0 次
接收感谢: 0 次
建议你装 apt-cache install kgrubeditor ,更有帮助

引用:
Description: graphical editor for GRUB boot manager settings
A tool to view and edit the menu.lst file of the GRUB boot manager. It offers
many features and it is the perfect solution for those who want to change the
way GRUB works, without messing with the menu.lst file.


页首
 用户资料  
 
5 楼 
 文章标题 :
帖子发表于 : 2008-08-14 22:11 

注册: 2005-10-26 15:43
帖子: 50
送出感谢: 0 次
接收感谢: 0 次
主要是通过2楼给的文件,找到了update-grub命令,原来还有这个命令,呵呵
回头试试楼上给的软件,这个是for kde的吗?


页首
 用户资料  
 
6 楼 
 文章标题 :
帖子发表于 : 2008-08-14 22:36 
头像

注册: 2008-07-14 22:42
帖子: 8078
地址: Beijing
送出感谢: 0 次
接收感谢: 0 次
代码:
# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default      0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout      10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title      Windows 95/98/NT/2000
# root      (hd0,0)
# makeactive
# chainloader   +1
#
# title      Linux
# root      (hd0,1)
# kernel   /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=6062-4ABB loop=/ubuntu/disks/root.disk ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,4)/ubuntu/disks

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title      Ubuntu 8.04.1, kernel 2.6.24-20-generic
root      (hd0,4)/ubuntu/disks
kernel      /boot/vmlinuz-2.6.24-20-generic root=UUID=6062-4ABB loop=/ubuntu/disks/root.disk ro quiet splash
initrd      /boot/initrd.img-2.6.24-20-generic

title      Ubuntu 8.04.1, kernel 2.6.24-20-generic (recovery mode)
root      (hd0,4)/ubuntu/disks
kernel      /boot/vmlinuz-2.6.24-20-generic root=UUID=6062-4ABB loop=/ubuntu/disks/root.disk ro single
initrd      /boot/initrd.img-2.6.24-20-generic

title      Ubuntu 8.04.1, kernel 2.6.24-16-generic
root      (hd0,4)/ubuntu/disks
kernel      /boot/vmlinuz-2.6.24-16-generic root=UUID=6062-4ABB loop=/ubuntu/disks/root.disk ro quiet splash
initrd      /boot/initrd.img-2.6.24-16-generic

title      Ubuntu 8.04.1, kernel 2.6.24-16-generic (recovery mode)
root      (hd0,4)/ubuntu/disks
kernel      /boot/vmlinuz-2.6.24-16-generic root=UUID=6062-4ABB loop=/ubuntu/disks/root.disk ro single
initrd      /boot/initrd.img-2.6.24-16-generic

title      Ubuntu 8.04.1, memtest86+
root      (hd0,4)/ubuntu/disks
kernel      /boot/memtest86+.bin

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title      Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title      Microsoft Windows XP Professional
root      (hd0,0)
savedefault
chainloader   +1
 8)


_________________
Ubuntu User


页首
 用户资料  
 
7 楼 
 文章标题 :
帖子发表于 : 2008-08-15 2:16 
头像

注册: 2006-09-10 22:36
帖子: 10663
地址: 北京
送出感谢: 1
接收感谢: 16
代码:
Console ~ $ cat /boot/grub/menu.lst
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst

# DEVICE NAME CONVERSIONS
#
#  Linux           Grub
# -------------------------
#  /dev/fd0        (fd0)
#  /dev/hda        (hd0)
#  /dev/hdb2       (hd1,1)
#  /dev/hda3       (hd0,2)
#

#  FRAMEBUFFER RESOLUTION SETTINGS
#     +-------------------------------------------------+
#          | 640x480    800x600    1024x768   1280x1024
#      ----+--------------------------------------------
#      256 | 0x301=769  0x303=771  0x305=773   0x307=775
#      32K | 0x310=784  0x313=787  0x316=790   0x319=793
#      64K | 0x311=785  0x314=788  0x317=791   0x31A=794
#      16M | 0x312=786  0x315=789  0x318=792   0x31B=795
#     +-------------------------------------------------+

# general configuration:
timeout   1
default   0
hiddenmenu
color light-blue/black light-cyan/blue

# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
#
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
#
#-*

# (0) Arch Linux
title  Arch Linux
root   (hd0,0)
kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/04d060a3-9280-4e46-bac8-1875bfd2b380 ro
initrd /boot/kernel26.img

# (1) Arch Linux
title  Arch Linux Fallback
root   (hd0,0)
kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/04d060a3-9280-4e46-bac8-1875bfd2b380 ro
initrd /boot/kernel26-fallback.img

# (1) Windows
#title Windows
#rootnoverify (hd0,0)
#makeactive
#chainloader +1


_________________
看破、放下、自在、随缘、念佛
真诚、清净、平等、正觉、慈悲


页首
 用户资料  
 
8 楼 
 文章标题 :
帖子发表于 : 2008-08-15 21:47 

注册: 2005-10-26 15:43
帖子: 50
送出感谢: 0 次
接收感谢: 0 次
谢谢楼上两位,用arch的xd都来了,呵呵


页首
 用户资料  
 
显示帖子 :  排序  
发表新帖 回复这个主题  [ 8 篇帖子 ] 

当前时区为 UTC + 8 小时


在线用户

正在浏览此版面的用户:cat650 和 4 位游客


不能 在这个版面发表主题
不能 在这个版面回复主题
不能 在这个版面编辑帖子
不能 在这个版面删除帖子
不能 在这个版面提交附件

前往 :  
本站点为公益性站点,用于推广开源自由软件,由 DiaHosting VPSBudgetVM VPS 提供服务。
我们认为:软件应可免费取得,软件工具在各种语言环境下皆可使用,且不会有任何功能上的差异;
人们应有定制和修改软件的自由,且方式不受限制,只要他们自认为合适。

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
简体中文语系由 王笑宇 翻译