请各位赐教，我的内核编绎好了，但是安装的时个却装不上模块??

fanlinfei · **发表于 :** 2009-04-13 23:59

我用2.6.28.2在UBANTO8.10上编绎好了，执行了make install 和 make modules install但是我在/lib/modules下面却看不见相应的2.6.28.2的文件夹，在起动的时候因库这个起动不了请问一下是什么原因????我用的是虚拟机编绎和安装.是不是在虚拟机下面不行..

这是我编译时用的语句和信息
root@ooooo:/usr/src/linux-2.6.28.2# make install
sh /usr/src/linux-2.6.28.2/arch/x86/boot/install.sh 2.6.28.2 arch/x86/boot/bzImage System.map "/boot"
root@ooooo:/usr/src/linux-2.6.28.2# make modules install
CHK include/linux/version.h
CHK include/linux/utsrelease.h
SYMLINK include/asm -> include/asm-x86
CALL scripts/checksyscalls.sh
CHK include/linux/compile.h
VDSOSYM arch/x86/vdso/vdso32-int80-syms.lds
VDSOSYM arch/x86/vdso/vdso32-sysenter-syms.lds
VDSOSYM arch/x86/vdso/vdso32-syms.lds
LD arch/x86/vdso/built-in.o
LD vmlinux.o
MODPOST vmlinux.o
WARNING: modpost: Found 5 section mismatch(es).
To see full details build your kernel with:
'make CONFIG_DEBUG_SECTION_MISMATCH=y'
GEN .version
CHK include/linux/compile.h
UPD include/linux/compile.h
CC init/version.o
LD init/built-in.o
LD .tmp_vmlinux1
KSYM .tmp_kallsyms1.S
AS .tmp_kallsyms1.o
LD .tmp_vmlinux2
KSYM .tmp_kallsyms2.S
AS .tmp_kallsyms2.o
LD vmlinux
SYSMAP System.map
SYSMAP .tmp_System.map
Building modules, stage 2.
MODPOST 2225 modules
sh /usr/src/linux-2.6.28.2/arch/x86/boot/install.sh 2.6.28.2 arch/x86/boot/bzImage System.map "/boot"
root@ooooo:/usr/src/linux-2.6.28.2#
root@ooooo:/usr/src/linux-2.6.28.2# cd /lib/modules
root@ooooo:/lib/modules# ls
2.6.27-11-generic 2.6.27-7-generic
root@ooooo:/lib/modules#

hitly · **发表于 :** 2009-04-14 8:50

make modules install
好像是make modules_install吧

fanlinfei · **发表于 :** 2009-04-14 22:13

用make modules_install好像是认为无效的命令，我试过。。。

fanlinfei · **发表于 :** 2009-04-15 10:10

这是我编译时用的语句和信息
root@ooooo:/usr/src/linux-2.6.28.2# make install
sh /usr/src/linux-2.6.28.2/arch/x86/boot/install.sh 2.6.28.2 arch/x86/boot/bzImage System.map "/boot"
root@ooooo:/usr/src/linux-2.6.28.2# make modules install
CHK include/linux/version.h
CHK include/linux/utsrelease.h
SYMLINK include/asm -> include/asm-x86
CALL scripts/checksyscalls.sh
CHK include/linux/compile.h
VDSOSYM arch/x86/vdso/vdso32-int80-syms.lds
VDSOSYM arch/x86/vdso/vdso32-sysenter-syms.lds
VDSOSYM arch/x86/vdso/vdso32-syms.lds
LD arch/x86/vdso/built-in.o
LD vmlinux.o
MODPOST vmlinux.o
WARNING: modpost: Found 5 section mismatch(es).
To see full details build your kernel with:
'make CONFIG_DEBUG_SECTION_MISMATCH=y'
GEN .version
CHK include/linux/compile.h
UPD include/linux/compile.h
CC init/version.o
LD init/built-in.o
LD .tmp_vmlinux1
KSYM .tmp_kallsyms1.S
AS .tmp_kallsyms1.o
LD .tmp_vmlinux2
KSYM .tmp_kallsyms2.S
AS .tmp_kallsyms2.o
LD vmlinux
SYSMAP System.map
SYSMAP .tmp_System.map
Building modules, stage 2.
MODPOST 2225 modules
sh /usr/src/linux-2.6.28.2/arch/x86/boot/install.sh 2.6.28.2 arch/x86/boot/bzImage System.map "/boot"
root@ooooo:/usr/src/linux-2.6.28.2#

请各位赐教，我的内核编绎好了，但是安装的时个却装不上模块??

在线用户