我的EDGE无线网卡不会配置,紧急求助!

系统安装、升级讨论
版面规则
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
回复
psd0303
帖子: 76
注册时间: 2008-10-10 13:10
系统: win7
来自: 山东莱芜加州步行街C-1109佳禾电子科技
联系:

我的EDGE无线网卡不会配置,紧急求助!

#1

帖子 psd0303 » 2009-06-17 23:30

Ubuntu装了好几天了,我的EDGE无线网卡就是不会配置,我的是ie-link308G-U,官方网站www.ie-link.com上没有linux的驱动,大师们指点一下啊!
root@psd-desktop:/home/psd# lsusb
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0471:1234 Philips
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
root@psd-desktop:/home/psd# lsusb -v -s 001:002

Bus 001 Device 002: ID 0471:1234 Philips
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0471 Philips
idProduct 0x1234
bcdDevice 1.00
iManufacturer 1 Royal Philips Electronics
iProduct 2
iSerial 3 000000
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 67
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 4 WMC Modem
CDC Header:
bcdCDC 1.10
CDC Union:
bMasterInterface 0
bSlaveInterface 1
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 1
CDC ACM:
bmCapabilities 0x07
sends break
line coding and serial state
get/set/clear comm features
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 16
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0001
Self Powered
root@psd-desktop:/home/psd#
佳禾电子科技
psd0303
帖子: 76
注册时间: 2008-10-10 13:10
系统: win7
来自: 山东莱芜加州步行街C-1109佳禾电子科技
联系:

Re: 我的EDGE无线网卡不会配置,紧急求助!

#2

帖子 psd0303 » 2009-06-17 23:42

我装了usb_modeswitch-1.0.2.deb和libusb-0.1-4_0.1.12-13_i386.deb,不知道该怎么配置。
还有用gnome ppp检测不到modem,用ndiswrapper加载驱动能成功,但是不能配置网络,附图
这是刚加载windowsXP下驱动的
这是刚加载windowsXP下驱动的
这是我点配置网络报错的
这是我点配置网络报错的
这是我用命令查看的结果
这是我用命令查看的结果
佳禾电子科技
psd0303
帖子: 76
注册时间: 2008-10-10 13:10
系统: win7
来自: 山东莱芜加州步行街C-1109佳禾电子科技
联系:

Re: 我的EDGE无线网卡不会配置,紧急求助!

#3

帖子 psd0303 » 2009-06-17 23:48

psd0303 写了:Ubuntu装了好几天了,我的EDGE无线网卡就是不会配置,我的是ie-link308G-U,官方网站www.ie-link.com上没有linux的驱动,大师们指点一下啊!
root@psd-desktop:/home/psd# lsusb
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0471:1234 Philips 这一行有变化:刚插上usb网卡时屏幕出现EDGE的光盘图标,里面是xp下的驱动,对应的是Bus 001 Device 002: ID 0471:5678,右键卸载EDGE光驱后5678变为1234
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
root@psd-desktop:/home/psd# lsusb -v -s 001:002

Bus 001 Device 002: ID 0471:1234 Philips
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0471 Philips
idProduct 0x1234
bcdDevice 1.00
iManufacturer 1 Royal Philips Electronics
iProduct 2
iSerial 3 000000
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 67
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 1 AT-commands (v.25ter)
iInterface 4 WMC Modem
CDC Header:
bcdCDC 1.10
CDC Union:
bMasterInterface 0
bSlaveInterface 1
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 1
CDC ACM:
bmCapabilities 0x07
sends break
line coding and serial state
get/set/clear comm features
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 16
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0001
Self Powered
root@psd-desktop:/home/psd#
佳禾电子科技
回复